• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.527-532
• /
• 2004

As well as the vibration comfort in passenger coaches largely affects passengers, it is one of the most important factors that passengers would betray their dissatisfactions among various elements, such as noise, lighting, couches, seat-arrangement, ventilation, temperature, odor, cleanliness, etc., consisting of comfort in passenger coaches. The wheel-tread figuration in the dynamic behavior of trainsets significantly affects the vibration comfort such as the running safety and the running stability. In this study, therefore, I will examine the dynamic characteristic in passenger coaches in accordance with the variation of wheel-tread figuration during the high-speed traveling with the target of trainsets (KT23 bogie), which are operated as the passenger coache in Korea, and any variation that will exert baneful influence on the vibration comfort accordingly.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.43-49
• /
• 2006

To design railway vehicles to ensure comfortable running, ride comfort of human exposed on vibrating carbody should be considered. Also, to improve ride comfort for passenger coach, many factors should be analysed and evaluated. There are many factors as suspension characteristics of railway vehicle, track characteristics to run etc. In this paper, passenger coach sujected to test on specific routine were evaluated using test results. Test routine were divided by 13 sections to analyse more detail. And the characteristics of every section were analysed distributions of radius curves, tunnel and bridge which could give impact to ride comfort. The evaluation of ride comfort were accomplished by UIC and ISO methods.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.62-66
• /
• 2011

The present work focuses on the evaluation of thermal comfort in passenger cabin of a cruise ship. A computational fluid dynamics (CFD(Airpak)) is used to calculate air velocity and temperature distribution in the passenger cabin as well as PMV and PPD. The CFD is used to simulate two different cases, room unit system and wardrobe duct system. Both of cases are simulated in summer environment condition. The room unit system and wardrobe duct system are compared and evaluated by ISO 7730 thermal comfort categories. The performance of room unit system is shown to be more effective for this typical case of passenger cabin.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.829-835
• /
• 2011

This paper aims for proposed the deflection limit on vibration serviceability of high-speed railway bridges considering passenger's comfort when a train passes a railway bridge. The vertical acceleration signals of passenger cars obtained from test were compared with them from the bridge-train transfer function by riding KTX. The deflections by KTX of seven high speed railway bridges were assumed as sine and haversine wave. The deflection limit on vibration serviceability of high-speed railway bridges considering passenger's comfort when a train passes a railway bridge duration can be expanded using bridge-train transfer function and bridge comfort limit considering serviceability due to bridge vibration. And it was compared to other allowable deflection limits of railway bridge design specifications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.82-89
• /
• 2016

This paper presents computational fluid dynamics (CFD) analysis on passenger thermal comfort in a train. Human thermal comfort in vehicles depends mainly on air temperature, mean radiant temperature, air velocity, humidity, and direct solar flux, as well as the level of activity and thermal properties of clothing and seat. The velocity and temperature distribution in a train with and without passengers are reported. The thermal comfort in a passenger train are also presented based on PMV and PPD indices with 16 segments of the human body.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.155-164
• /
• 2014

PURPOSES : The purpose of this article is to compare and evaluate the riding comfort of a passenger in tunnels depending on different surface textures of concrete pavement. METHODS : Evaluation of riding comfort is conducted at 17 sections, which have different surface texture such as transverse tinned(TT), longitudinal tinned(LT) and diamond grinded(DG). A triaxial accelerometer was set up on the passenger seat surface of the test vehicle to measure vibrations of an occupant, then the effects of vibration on comfort and health were evaluated by ISO 2631. And microphones were installed at passenger's ears height to measure sound pressure level(SPL) in the test vehicle. Additionally, a surface microphone was installed on the inside of wheel arch to evaluate noise between tire and pavement by NCPX method. All tests were conducted cruising at 100km/h. RESULTS : The results of all tests are as follows. First, both vibration magnitudes for comfort and for health in LT and DG sections are almost same and they represent lower than those in TT sections. Second, the average SPL of DG shows the lowest decibels among them. And third, it is founded that interior noise is significantly affected by noise between tire and pavement. CONCLUSIONS : It may be concluded that DG can provide more excellent riding comfort to passenger than LT or TT. Therefore, it is necessary to consider applying DG to existing pavement surface to improve surface condition when the driving environment especially requires riding comfort like a long tunnel.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.321-328
• /
• 1998

In this study we have studied running stability, safety and passenger comfort of the Chinese first class passenger car made by our company and CCRW. A fine analysis model of 72 d.o.f. was constructed for simulating dynamic behavior of the car on straight and curved tracks having irregularity configurations. We have calculated the various characteristic values such as critical speed, lateral force, derailment ratio, wheel unloading ratio and passenger comfort index, then evaluated them by comparing with reference values.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 춘계학술대회논문집
• /
• pp.124-133
• /
• 1993

Porper ergonomic design of a passenger seat for the highspeed train is one of the essential design components that is directly related to passenger comfort. This study investigated a systematic approach to ergonomic passenger seat design and evaluation for the Korean highspeed train. To design an ergonomic passenger seat that improves passenger comfort, seat dimensions, Korean anthropometry, passenger activities in the coach, body postures and body contours were considered. The interrelationship of these factors was analyzed and seat dimensions were suggested. To properly evaluate the dimensions suggested, four prototypes were made and iteratively evaluated as a feedback procedure. This approach is expected to be applicable to the passenger seat design of other transport vehicles as well as a train.