• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.321-329
• /
• 2001

This study included three experiments to evaluate in-vehicle exposures to PM10 and CO: 1) evaluation of in-passenger car exposures, 2) evaluation of in-public bus exposures, and 3) simultaneous evaluation of in-passenger car and in -university bus exposures. The tests of four factors (transportation mode, passenger-car type, commute period, and commute season were focused. A total of 40 actual passenger car commuters, 20 public bus commuters, and four university buses were recruited or surveyed. The same commuters ware participated in both the summer and winter studied. Two factory such as transportation mode and passenger-car type were found to have little effect on the in-vehicle levels of PM10 and CO. Commute period was found to have little effect on the in-vehicle CO levels. Conversely, the other factor, commuting season was found to influence on the in-vehicle levels of PM10 and CO. The present study also confirmed that under the Korean commute conditions, vehicle interiors are an important microenvironment for exposure to PM10 and CO. This was supported by finding that the in-vehicle Air levels were much higher than ambient air levels reported by several previous studies. The mean in -vehicle PM10 concentrations were 114 and 103$\mu\textrm{g}$/m$^3$for passenger cars and public buses, respectively. For CO, the mean in-vehicle concentrations were 2.9 and 2.6 ppm for passenger cars and public louses, respectively.

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.527-541
• /
• 2015

The purpose of this study is to investigate the changes in the inter-city passenger flows since adapting the express rail system in Korea(KTX). For the purpose, we analyze the express bus and rail passenger annual flow data of the before and after adapting KTX. In first, we examine the changes in the time-distance parameters in the inter-city passenger flows of the express bus, general rail, and KTX by applying gravity model. The results reveal that express bus passenger flows are less sensible to the time-distance compare to the rail passenger flows, and the trends have been intensified over time. However, the time-distance parameters for the KTX passenger flows reveal the reverse relationships with the gravity model. The KTX passenger flows expand between the long distance cities. We also apply the MST(Maximum Spanning Tree) method to find out the spatial structural changes in the inter-city passenger flows. The number of hierarchies has been increased in the express bus and general rail passenger flows, while single hierarchical structure has been lasted in the KTX passenger flows.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.2
• /
• pp.7-14
• /
• 2016

Purpose: Caring for weak person in society, which increases the population of the elderly and people with disabilities is essential. By increasing along with the increase of the use of passenger facilities for travelers and pedestrian is increasing the demand for convenient and secure facilities for everyone. The emerging importance of the passenger-related facilities, but a representative study of the bus terminal facilities is lacking. Bus terminals are the most popular passenger facility. Thus, the bus terminal can be conveniently used by anyone in everyday life, however, the applied elements considering the use of the transportation Poor are not sufficient. Methods: This study was conducted to evaluate BF certification standards targeting bus terminals across the country to determine the availability of the transportation Poor in bus terminal. Result: As a result of the bus Terminal possibility BF certified it appeared to be very low. Also, items received the lowest rating of each item was evaluated in the informative facilities and items. Bus terminal is a facility used by the unspecified individuals, the proportion of first-time user is high, but there is a lack of consideration for the transportation Poor bus terminals. Implications: In the future, this study can guide the next research on the application of BF certification standards in bus terminal. Further studies can be presented to the improvement of the BF certification indicator in bus terminal.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.543-549
• /
• 2020

Background: The working conditions of bus drivers are difficult; they lead to occupational diseases and require careful study, particularly in Ukraine. The objective of the article is the description of occupational health risks of passenger bus drivers that lead to deteriorating health. Methods: The risk assessment was performed using a modified Risk Score method, which allowed determining the generalized level of danger to the driver's health. The hygienic hazards level was assessed as based on Stevenson's law, which was generalized later. Results: Based on the modification of the Risk Score method, it was possible to depart from expert assessments method of the risk level and calculate the general indicator based on the degree of dependence of the impact on the human body on its intensity, proposed by V. Minko. This allows objective determining of the impact of hygiene hazards on the health of the driver and to predict the occurrence of occupational diseases associated with the cardiovascular system, musculoskeletal system, and partial or complete disability due to the accumulation of emotional fatigue. The hazard assessment was carried out for three brands of passenger buses common in Ukraine, in which the driver is exposed to the dangers of fever, vibration, noise, harmful impurities in the bus cabin, and emotional load. Conclusion: The health of drivers in the cabins of passenger buses is most affected by hygiene hazards: fever, vibration, and emotional stress. The generalized level of risk is calculated by the modified method of Risk Score is 0.83; -0.99, -0.92 respectively.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.149-159
• /
• 2005

The paper presented not only the difference of the marginal walking time by passenger. but also the derivation of the bus service determination model by passenger attributes. The marginal walking distance to bus stop is a basic parameter to estimate bus service coverage area in certain area. And the marginal walking distance could be transformed from the marginal walking time, which is the focus of this paper. The result of analysis revealed that the age and income of passenger are strongly related to the marginal walking time. In planning or regulating the spacing of bus routes or bus stops in certain area, the model suggested in this paper help for the planner to choose optimal alternative.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.217-228
• /
• 2021

After the integrated fare system has been applied, public transportation and transfer traffic increased. As a result, transfer passengers must be considered in the operation of the bus. Although previous studies have limitations due to utilizing deterministic mathematical models, which fails to reflect the stochastic movements of passengers and buses, in this study, a more realistic bus stop micro-simulation model is proposed. Based on the proposed simulation model, we represent the relationship between bus arrival interval and passenger wait time as a regression model and empirically show the differences between the cases with and without transfer passengers. Also, we propose a method converting passenger waiting time to cost and find optimal bus arrival interval based on the converted cost. It is expected the proposed method enables bottom-up decision making reflecting practical situation.

• Journal of Korean Society of Transportation
• /
• v.14 no.1
• /
• pp.69-80
• /
• 1996

In most cities, travel demand is distributed along long corridors and its destinations tend to concentrate in a central business district. For this kind of many-to-one or one-to-many travel demand pattern, a zonal operation of buses can be an efficient bus operation technique in which a long bus-demand corridor is divided into service zones and each service zone is provided with its own bus route connecting the service zone and single destination separately. This paper develops models of the total transportation costs for a single-zone operation and 2-zonal operation of buses for a long demand corridor with single destination in terms of various cost parameters, demand density, bus operation speeds, and location of the boundary between two service zones. In this study the total transportation cost is assumed to consist of the bus operation cost, passenger waiting cost and passenger travel time cost. It was proved that a zonal operation of buses can be more efficient than a single-zone operation for certain circumstances of the system and an boundary condition between two operation techniques was obtained. Also, several case studies were performed for various values of the cost parameters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.57-66
• /
• 2012

This study intended to evaluate the operational performance change from the introduction of the bus signal priority system using the field data. To complete the objective, travel time and volume data were collected from the before and after study, then the distribution of individual vehicle's travel time and the difference of travel time and traffic volume were compared respectively. Analysis results showed that no significant volume change was observed from both passenger vehicle and bus for the major and cross streets. It was identified that the quality of travel time distributions of passenger vehicle and bus was improved after introducing the bus signal priority system. In terms of average speed, passenger car in a major direction increased by 6.5% and bus increased by 10.5% in general. Statistical tests showed that those speed differences were statistically significant at the 95% of confidence level. The results of this paper will be a good source for further research in the area of bus signal priority control.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.122-127
• /
• 2008

General bus stop is very simple and have some problem to protect the passengers and don't have any proper information messenger for the convenience of bus riding in spite of present initiative bus information system. However, this paper have introduced new conceptual modular-smart station avaliable to both public bus and bimodal tram. It can secure the passenger's safety from other danger attributes like running car or unexpected natural disaster and supply the passengers the variable information from display which is connected to the control center. Therefore, modular-smart station is both shelter and information messenger for passenger's safey and convenience.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.1-6
• /
• 1998

A leaf spring plays an important role in a passenger bus. Since characteristic of a leaf spring has a hysteresis behaviour, modeling technique for a leaf spring is an important issue for passenger bus analysis. In this paper, modeling technique for a leaf spring is presented. First, non-linear FEM model of a leaf spring is constructed then it is used to make an approximated model to be used in dynamic analysis. The modeling procedure is ex-plained in step by step approach. Then, this model is applied to dynamic analysis of a mini-bus with flexible body and non-linear dynamic force element. The results are compared with test data.