• International Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.22-25
• /
• 2016

This dissertation tried to analyze passenger behaviors after an accident with the possibilities of a variety of accidents open reflecting the phases of the times of increasing interests in safety of passengers as the use of means of transportation such as cars and airplanes is increasing. Because a lot of data on head-on collisions, broadside collisions and reverse side collisions have been gathered through lots of experiments and interpretations, I chose to study a relatively unfamiliar subject, dropping collision. For example, I tried to study passenger behaviors in seating position after a dropping collision in preparation for falling accidents due to recent frequently-occurring sinkholes, driver's carelessness or mechanical problems. I used MADYMO, passenger behavior interpretation program, and experimented with 2 meters high Drop Test device which I made in person to increase the reliability of the results. On the basis of these, I compared the real experiments with interpretations.

• International Journal of Reliability and Applications
• /
• v.11 no.1
• /
• pp.55-67
• /
• 2010

There has been a recent upsurge in demand for the improvement of car reliability in the Northern American which is the primary market of South Korea automobile industry. It has been required that the warranty for transmission control unit for passenger cars directly related to passenger safety or security should be extended for 10 years and 160,000 km. In this paper, the test method for reliability and evaluation criteria is presented to evaluate the reliability on the automatic transmission controller. Reliability certification test can be roughly divided into two types: a quality test and life assessment test and a quality test can be subdivided into a basic performance test and environmental resistance test. There are 3 types of tests on the performance test for automatic transmission controller and environmental resistance test is composed of 14 items. Life test is performed with only the product passed this quality test. In this study, operation limit test at the high-temperatures, accelerated life test under specific temperature and accelerated life test for 2 or 3 stress levels are shown as a way for life test.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.25-36
• /
• 1992

A possible adverse effect on the likelihood of front-seat occupant fatalities from unbelted rear-seat occupants in frontal crashes is investigated using Fatal Accident Reporting System data. Passenger cars which sustained frontal damage and which did not roll over are included in this analysis. Of the frontally damaged cars, only cars containing a driver and a right-front passenger are selected. Then, from these cars, the following three cases are considered: a) left-rear occupant present, b) right-rear occupant present, and c) no one else in the car. Cars belonging to a) or b) contain only three occupants, and those belonging to the last case contain only two occupants. In addition, all occupants are unbelted. To estimate the influence of rear-seat occupants on front-seat occupant fatalities, relative risks of driver and right-front passenger fatalities are compared pairwise across these three cases. The adverse influence of unbelted rear-seat occupants on the likelihood of unbelted front-seat occupant fatalities in frontal crashes is estimated to be 7.9% ${\pm}$ 45%(the error limits indicate one standard error). In other words, front-seat occupant fatalities are increased 7.9% in frontal crashes due to the loadings from unbelted rear-seat occupants. This suggests that the usage of safety belts by rear-seat occupants not only may extend their own lives but also helps in reducing the fatalities of front-seat occupants seated in front of them.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.44-51
• /
• 2009

The purpose of this study is to investigate the performance of shock absorption of recycled bumper applied to the standard of shock absorption for newly-developed bumper. For the experiment, two different passenger cars which have different types of bumper were selected. In this work, two kinds of reused bumpers were tested in accordance with an automotive safety regulation to verify exterior bumpers' impact energy absorption performance. The performance results of reused bumper test show that the shock absorption performance indicated the almost same performance and similar characteristics of 2.5 miles bumper test compared to the absorption performance of new bumper of test vehicles.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.5
• /
• pp.719-724
• /
• 2010

Thousands of passengers and crews are onboard a cruise ship and there are many cabins and large public spaces such as atria and theaters. Therefore it is easy to cause a huge loss of life and damage to property when accidents happen at sea. To improve the safety of passenger ships, in October 2007, IMO proposed MSC.1/Circ.1238 on guidelines for evacuation analysis and recommended its use. However, this guideline is difficult to apply because ship designers need to get many pieces of information from CAD drawings such as width and length of stairs and corridors and manually calculate the evacuation time. In this paper, for practical application of the guidelines, an evacuation time calculation program is developed using AutoCAD .NET API library and C Sharp language.

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.5-10
• /
• 2011

Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.229-236
• /
• 2009

This paper intended to find rational alternatives for contracting-out of duties of the Busan port Pier Management Corporation, which is facing the merger and abolition, and of which main functions include the management of port facilities such as International Passenger Terminal, Cruise Terminal and Coast Passenger Terminal. This paper searched appropriate term, needs (merits), proper scope and cost of the contracting-out of that port facilities. The result of the analysis indicated that the best policy is to privatize the Busan port Pier Management Corporation itself to make it an private incorporated company.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.31-36
• /
• 2013

PURPOSES: This study is to investigate a generated traffic noise when vehicle pass over a transverse rumble strip at toll plaza of highway. METHODS: To investigate traffic noise at toll plaza of highway, Pass-by method which is the most common used for measuring traffic noise was adopted and the traffic noise at toll plaza was measured for 10 min per hour for 11hours(13:00~24:00). RESULTS: The measured traffic noise by pass-by method was changed as function of the transverse rumble strip configuration. Generally, the maximum difference among three noise measurement sections was 7 dB(A). It might be related with traffic speed. Also, the measured traffic noise was strongly generated from a passenger car which was 2 axle. It means that the most of traffic noise on the road is generated at tire/pavement interface of the passenger car. CONCLUSIONS: The traffic noise was strongly related with vehicle speed and transverse rumble strip configuration on the road. For driver safety, the transverse rumble strip is definitely necessary. However, the complaints from residents near highway was increased by traffic noise from transverse rumble strip. Therefore, To satisfy both safety and reduction of traffic noise, the development of configuration of transverse rumble strip is necessary in the further study.

• The Journal of Korea Robotics Society
• /
• v.13 no.1
• /
• pp.31-37
• /
• 2018

Recently, the safety in vehicle also has become a hot topic as self-driving car is developed. In passive safety systems such as airbags and seat belts, the system is being changed into an active system that actively grasps the status and behavior of the passengers including the driver to mitigate the risk. Furthermore, it is expected that it will be possible to provide customized services such as seat deformation, air conditioning operation and D.W.D (Distraction While Driving) warning suitable for the passenger by using occupant information. In this paper, we propose robust vehicle occupant detection algorithm based on RGB-Depth-Thermal camera for obtaining the passengers information. The RGB-Depth-Thermal camera sensor system was configured to be robust against various environment. Also, one of the deep learning algorithms, OpenPose, was used for occupant detection. This algorithm is advantageous not only for RGB image but also for thermal image even using existing learned model. The algorithm will be supplemented to acquire high level information such as passenger attitude detection and face recognition mentioned in the introduction and provide customized active convenience service.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.83-88
• /
• 2005

This study is about current operating system and development process if remote island route. 14 companies are providing safe transportation service for remote island residents with total 30 boots on Z7 routes. Each route transit analysis shows tint the number of passenger tends to increase every year. In order to enhance customer satisfaction, more constructive improvement is demanded, such as implementing operation evaluation on each charter service provider.1he result obtained from this study is to be utilized as basic document for remote island route development process in semi-long run basis.