• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.81-96
• /
• 2007

단조해안에서의 비선형 천수거동을 가장 강건한 파랑모형인 Navier Stokes 식에 기초하여 수치모의 하였다. 이와 더불어 SUPERTANK LABORATORY DATA COLLECTION PROJECT(Krauss et al., 1992)에서 취득한 자료를 활용하여 Reynolds 응력에 대한 구배모형의 한계를 검증하였다. 취득한 쇄파대 유동계의 자기상관함수는 상당한 특성길이를 지니며 이러한 결과는 구배모형이 큰 오류를 야기할 수 있다는 사실을 시사한다. 이러한 인식에 기초하여 파랑모형은 Large Eddy Simulation(LES), Smooth Particle Hydrodynamics(SPH), Gaussian kernel function을 사용하여 수치 적분하였다. 잔차응력은 Lagrangian Dynamic Smagronski 모형(Meneveau et al.,1996)을 활용하여 모의하였으며 모의 기간 중 유체 알갱이간의 이격거리는 관성부영역의 특성길이보다 작게 유지되도록 노력하였다. 천수과정에서 진행되는 동조 비동조 고차 조화성분으로 전이된 파랑에너지로 인해 상당히 예리하고 왜도된 파형, 파형의 마루로부터 시작되는 물입자 자유낙하, 착수로 인한 커다란 물보라의 형성, 물보라 형성층의 해변으로의 이행, wave finger(Narayanaswamy와 Darlymple, 2002) 등이 비교적 정확히 재현되는 등 상당히 고무적인 결과를 얻었다.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• 에너지공학
• /
• 제26권1호
• /
• pp.1-8
• /
• 2017

에틸렌글리콜법을 활용하여 국내 순환유동층보일러형 발전소에서 발생되는 석탄회의 물리화학적 특성 및 Free CaO 평가를 수행하였다. 물리화학적 특성결과, 각 발전사마다 많은 CaO 함량 차이를 나타내었는데, 이는 황산화물 배출농도 규제 차이 및 보일러 제작사가 다른 발전소의 운전특성이 복합적으로 반영된 것으로 판단된다. Free CaO의 함량은, 비산재는 1.96 ~ 10.78 %, 바닥재는 0.07 ~ 4.24%로 비산재가 바닥재보다 높게 나타났으며, 원시료의 CaO 함량 이외에 입도 분포에 따라서도 크게 변화되는 것으로 확인되었다.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.510-516
• /
• 2013

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the $-46{\mu}m$ fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size ($d_{50}$) decreased from $22.17{\mu}m$ to $10.79{\mu}m$. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.576-580
• /
• 2006

본 논문에서는 수은 램프를 대체하기 위하여 제논 기체를 사용한 무수은 램프를 제작하여 제논 여기종 밀도에 대한 연구를 진행하였다. 진공자외선을 방사할 수 있는 $1s_4$ 공명준위의 제논 원자 밀도와 $1s_5$ 준안정준위의 제논 원자 밀도를 레이저 흡수 분광법을 사용하여 다양한 기체조건 및 방전전류에 따라서 측정하였다. 우리는 주어진 압력에서 방전전류에 따른 $1s_4$ 공명준위의 제논 원자 밀도와 $1s_5$ 준안정준위의 제논 원자 밀도를 측정하였으며 이러한 기본적인 방전 특성의 이해는 EEFL뿐만 아니라 플라스마 디스플레이에서도 발광 효율을 높이는데 매우 큰 기여를 할 것이다.

• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.79-86
• /
• 2022

Many commercial air purifiers currently have deployed granular activated carbon (GAC) filters for removing volatile organic compounds in the indoor air. GACs are generally used to remove gaseous contaminants in the air through adsorption by the inner surfaces of pores. In addition, airborne particles can be also filtered by the surface adsorption of the GACs, which can improve the life-time of the particulate filters. In this study, the filtration efficiency of GACs to ultrafine particles through surface adsorption was investigated at different volume flow rates by deploying a continuous particle filtration system. The polydisperse sodium chloride (NaCl) particles were generated by a set of an atomizer and a diffusion dryer, and then mixed with particle-free air at different volume flow rates. The penetration of ultrafine particles and pressure drop for each experimental condition were measured to figure out the effect of the volume flow rate on the surface adsoprtion of the GACs to particles, ~ 2 mm. The particle filtration efficiency of the GACs decreased as the volume flow rate increased from 4 to 14 lpm. However, the 5 times thicker GAC filter layer decreased the penetration of ultraparticles than a preious study. The filtration efficiency of the single granule was also higher than the previous result in the literature with smaller granule filter materials.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.112-119
• /
• 2009

The purpose of this study is to evaluate the evaluation of process yield performed by using Sn & Cu treatment on the surface to optimize process condition for Lead-free solder application. The materials which are used for the New Surface Treatment study are Semi-Dulling plating for high speed Sn/Cu alloy of Soft Alloy GTC-33 Pb free known as "UEMURA Method" and plating substrate is alloy 42.Especially in lead-free plating process, it is important to control plating thickness and Copper composition than Sn/Pb plating. Evaluated and controlled plating thickness $12{\pm}3um$, Copper composition $2{\pm}1%$, plating particle and visual inspection. The optimization of these parameters and condition makes it makes possible to apply Sn/Cu Lead-free solder from Sn/Pb alloy.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권4호
• /
• pp.255-262
• /
• 2013

본 연구에서는 연속체 이론을 배경으로 하며 일반적으로 많이 사용되는 Navire-Stokes방정식이 아닌 입자의 확률분포를 배경으로 하는 Boltzmann 방정식을 이용하여 자유수면을 포함하는 유동을 해석하는 전산시뮬레이션 코드를 개발하였다. 댐 붕괴시뮬레이션에 적용하여 코드의 검증을 수행하였으며, 기존의 실험 및 계산결과와 비교함과 동시에 격자볼츠만 시뮬레이션의 특성을 분석하였다. 공학적 응용을 위해서 임의 형상의 물체가 존재시에 자유수면 시뮬레이션도 수행하였다.

• Earthquakes and Structures
• /
• 제12권5호
• /
• pp.583-589
• /
• 2017

In this study, result of a field investigation of railway traffic-induced vibrations is provided to examine acceptability levels of ground vibration and to evaluate the serviceability of a liquid-storage tank. Free field attenuation of the amplitudes as a function of distance is derived by six accelerometers and compared with a well-known half-space Bornitz's analytical solution which considers the loss of the amplitude of waves due to geometrical damping and material damping of Rayleigh. Bornitz's solution tends to overlap vertical free field vibration compared with in-situ measured records. The vibrations of the liquid-storage tank were compared with the USA, Federal Transportation Railroad Administration (FTA) criteria for acceptable ground-borne vibrations and with the criteria in DIN 4150-3 German standard. Comparing the thresholds stated in DIN 4150-3, absolute peak particle velocities are within the safe limits, however according to FTA velocity level at the top of the water tank exceeds the allowable limits. Furthermore, it is intended to indicate experimentally the effect of the kinematic interaction caused by the foundation of the structure on the free-field vibrations.

• 천문학회지
• /
• 제46권1호
• /
• pp.49-63
• /
• 2013

Nonthermal radiation from supernova remnants (SNRs) provides observational evidence and constraints on the diffusive shock acceleration (DSA) hypothesis for the origins of Galactic cosmic rays (CRs). Recently it has been recognized that a variety of plasma wave-particle interactions operate at astrophysical shocks and the detailed outcomes of DSA are governed by their complex and nonlinear interrelationships. Here we calculate the energy spectra of CR protons and electrons accelerated at Type Ia SNRs, using time-dependent, DSA simulations with phenomenological models for magnetic field amplification due to CR streaming instabilities, Alf$\acute{e}$enic drift, and free escape boundary. We show that, if scattering centers drift with the Alf$\acute{e}$en speed in the amplified magnetic fields, the CR energy spectrum is steepened and the acceleration efficiency is significantly reduced at strong CR modified SNR shocks. Even with fast Afv$\acute{e}$nic drift, DSA can still be efficient enough to develop a substantial shock precursor due to CR pressure feedback and convert about 20-30% of the SN explosion energy into CRs. Since the high energy end of the CR proton spectrum is composed of the particles that are injected in the early stages, in order to predict nonthermal emissions, especially in X-ray and ${\gamma}-ray$ bands, it is important to follow the time dependent evolution of the shock dynamics, CR injection process, magnetic field amplification, and particle escape. Thus it is crucial to understand the details of these plasma interactions associated with collisionless shocks in successful modeling of nonlinear DSA.