• Resources Recycling
• /
• v.18 no.5
• /
• pp.19-25
• /
• 2009

Molybdenite concentrate ($MoS_2$) is the major mineral for the molybdenum industry, of which the industrial processing is first converted to technical grade molybdenum trioxide ($MoO_3$) by its oxidative roasting and purification, used as a raw material for manufacturing several molybdenum compounds. In the present work, detailed experimental results for the oxidative roasting of low grade Mongolian molybdenite concentrate are presented. The experiments were carried out in the temperature range of 793 to 823 K under an oxygen partial pressure range of 0.08 atm to 0.21 atm by using a thermogravimetric analysis technique. The molybdenite concentrate was an average particle size of $67\;{\mu}m$. In the oxidative roasting of low grade Mongolian molybdenite concentrate, more than 95% of molybdenite was converted to molybdenum trioxide in 60 min. at 828 K. The lander equation was found to be useful in describing the rates of the oxidative roasting and the reaction order with respect to oxygen concentration in a gaseous mixture with nitrogen was 0.11 order.

• Korean Journal of Veterinary Service
• /
• v.31 no.3
• /
• pp.385-395
• /
• 2008

This study was carried out to investigate the residue level of fluoroquinolones in hen's general eggs and specific eggs by microbiological assay method and high performance liquid chromatography (HPLC) method. HPLC separation was carried out by reversed phase chromatography on a Symmetry $C_{18}$ (250${\times}$4.6 mm, $5{\mu}m$ particle size) with a phase composed of distilled water (containing 0.4% triethylamine and phosphoric acid) : Methanol (780 : 220, v/v), pumped isocratically at a flow rate of 1.0ml/min. A fluorescence detector was utilized with an excitation wavelength of 278nm and an emission wavelength of 456nm. The calibration curves were linear $({\gamma}^2{\geq}0.999)$ over a concentration range of $0.025{\sim}0.4{\mu}g/ml$. Average recoveries of the five fluoroquinolones in whole eggs at fortified levels of $0.05{\sim}0.2{\mu}g/g$ were ranged mean $78.1{\sim}91.7%$ and low coefficient of variation was less than 10% for all analysed samples. The limits of detection and limits of quantification for whole eggs were $1.2{\sim}6.0ng/g$ and $2.3{\sim}9.1ng/g$, respectively. Only one hen's general eggfrom chicken farm in Incheon was detected with the residual fluoroquinolones (Microbiological assay method; 1 of 47 general eggs) ; the range of residual concentration enrofloxacin was 0.12ppm. Those in food stores were detected with the residual fluoroquinolones (Microbiological assay method; 4 of 88 general eggs) ; the ranges of residual concentration enrofloxacin were $0.15{\sim}2.2 ppm$, ciprofloxacin $0.01{\sim}0.06ppm$, and hen's specific eggs (40) in food stores were not detected. For the microbiological assay method of fluoroquinolones in hen's eggs, as the results of comparative analysis, the disc diffusion method with E coli may be a little highly detected for the residual fluoroquinolones.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.3
• /
• pp.115-124
• /
• 2014

In order to leach Au and Ag from gold-silver bearing sulfide concentrate, the sulfide concentrate was ground in a ball mill for a dry pre-treatment and a wet pre-treatment process. Mineralogical studies and thiourea leaching experiments were carried out with the pre-treated sulfide concentrate. The results of the pre-treatment with the concentrate samples showed the mean particle size and iso-electrical potential was smaller in the dry pre-treatment sample than in the concentrate sample, and the contents was lower in the wet pre-treatment sample than in the dry pre-treatment sample. In XRD analysis, amorphous properties were only shown in the wet pretreatment sample. The results of the concentrate sample leaching experiments showed that the best Au, Ag leaching parameters were when the addition of thiourea was at a 1.0 g concentration, ferric sulfate was 1.0 M, sulfuric acid was 2.0 M and the leaching temperature was at $60^{\circ}C$. The Au, Ag leaching rate was always much greater and faster with the wet pre-treatment samples than with the dry pre-treatment samples. Accordingly, it is expected that more Au, Ag can be leached in an eco-friendly methodology using wet pre-treatment. The pre-treatment could be improved with an optimized grinding additive reagent and through researching grinding time in future non-cyanide processes.

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.713-718
• /
• 2009

Advanced industries-IT, BT, NT and ET are rapidly developing in 21 century. And the cement industry is becoming the principal factor in air pollution because of the creation of $CO_2$ during manufacturing. Also, the cement industry will be faced with a crisis due to the exhaustion of natural resources. In this study, nano cement by Bottom-up method of a chemical synthesis was developed. The generation of $CO_2$ during the plasticization process of cement manufacturing was avoided. The purpose was to produce building materials that have both high strength and durability as the high value-added growth engine industry of the 21 century. The nano cement was developed using hydrothermal synthesis. This is a method of mixing after ripening, by manufacturing the high density gel and low gel, which does not require special test equipment or pressure conditions to produce. Particle size, SEM, EDX, and porosity tests were conducted. This study investigated the compressive strength of concrete with various compositions. Specimens were tested for compressive strength at 3, 7, 14 and 28 days. The medium-sized (50% by weight) cement particles created by chemical synthesis were less than 168 nm. The compressive strength of the mortar prepared using this cement was 53.9 MPa. But it was judged that succeeding study will be necessary for development of nano building materials with high ability and economical analysis.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2006

Lithium titanium oxide $(Li_4Ti_5O_{12})$ with spinel-framework structures as anode material for lithium-ion battery was prepared by sol-gel and high energy ball milling (HEBH) method. According to the X-ray diffraction (XRD), Particle Size Analyses(PSA) and scanning electron microscopy (SEM) analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100 nm were observed. Half cells, consisting of $Li_4Ti_5O_{12}$ as working electrode and lithium foil as both counter and reference electrodes showed the high performance of high rate discharge capacity and 173 mAh/g at 0.2C in the range of $1.0\sim2.5 V$. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transform during the lithium intercalation and deintercalation process.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.410-416
• /
• 2004

In this study, we fabricated magnetite coated on a cordierite honeycomb which has complex shape by ultrasound-enhanced ferrite plating. The effects of the plating condition on the formation of the magnetite and its microstructure were investigated. The magnetite coated on the honeycomb became an oxygen-deficient ferrite by H$_2$ gas reduction, then the effects of the molar concentrations of ammonium acetate for $CO_2$ gas decomposition have been studied. As the molar concentration of a pH buffer($CH_3$COONH$_4$, 0.1946∼0.3892 M) solution increased, the average particle size increased about 200∼250 nm. The magnetite coated on the honeycomb was reduced by H$_2$ gas for 2 h at 30$0^{\circ}C$. The inner pressure change in the cell began to occur at 315∼34$0^{\circ}C$. The H$_2$-Reduced magnetite coated on the honeycomb at 35$0^{\circ}C$ contained an oxygen deficient magnetite and $\alpha$-Fe phase. The thermogravimetric analysis with H$_2$ reduction and $CO_2$ decomposition were carried out with the magnetite coated on the honeycomb. A weight loss in process of H$_2$ reduction occurred between 32$0^{\circ}C$ and 34$0^{\circ}C$, while a weight gain was observed during the $CO_2$ decomposition.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.329-340
• /
• 2016

Increase in demotion and repair works on buildings in the construction market generates a large amount of construction waste. Recycling of construction waste is important for saving of resources, preservation of environment and constant advance of the construction industry. Accordingly, the environmental and economic value of recycled aggregate, which is produced after waste concrete is crushed, is increasingly highlighted. It is generally known that compared to concrete made of ordinary aggregate, concrete made of recycled aggregate has low quality, and the low quality is dependent on the amount of the bonding heterogeneous (cement paste and mortar) as well as the amount of the pores within the bonding heterogeneous. Reports on carbonation mechanism shows that the pores of cement-based materials are filled up by the progress of carbonation. Therefore, this study aims at an estimation of the period for optimum carbonation reforming appropriate for the thickness of the bonding heterogeneous of recycled aggregate, based on carbonation mechanism, with a view to improving the product quality by means of filling up the pores of the bonding heterogeneous of recycled aggregate. This study drew the carbonation depth according to the passage of age by calculating the bonding ratio and bonding thickness of the bonding heterogeneous as against the particle size distribution of recycled aggregate as well as by chemical quantitative analysis according to the age of accelerated carbonation of mock-up samples imitating bonding heterogeneous. Based on the correlation between the age of accelerated carbonation and carbonation depth, this study also proposed the estimated period of carbonation reforming of recycled aggregate appropriate for the thickness of the bonding heterogeneous.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.383-390
• /
• 1998

The purpose of this study was to evaluate the effect of new materials with forest topsoil for hydroseeding measures that is environmentally and ecologically stable revegetation measures on rock cut-slopes. Field hydroseeding experiment was used with a completely randomized design at highway rock cut-slopes in April, 1997. Results obtained in this study were summarized as follows: Particle size distribution of 3 mixed-soil materials that consisted of forest topsoil, decomposed granite soil, compost, sludge, and bottom ash did not show a significant difference. As appending the amount of forest topsoil, soil bulk density was increased. Soil hardness was slightly increased in early period, and then decreased with the flourishing of plants. The number of individuals increased, more than $3,000seedlings/m^2$, after 1 month, and it was decreased as time passes because of competition between the seeded species and the naturally emerged species. In addition to the seeded species, seeding plot has more than 6 species (Rubus crataegifolius, Eleusine indica, Erigeron canadensis, Lycopersicon esculentum var. cerasiforme, etc.) per $m^2$ were naturally appeared in the first year. From the viewpoint of species diversity promotion, the capability of using forest topsoil as seed bank sources was high. In order to apply in the field, the investigation and analysis of topsoil availability (quantity and quality of seed source, soil texture and organic composition) should be carried out before-hand.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.233-244
• /
• 2015

In order to study the phase transformation of pyrite and to determine the maximum Fe leaching factors, pyrite samples were an electric furnace and microwave oven and then ammonia leaching was carried out. The rim structure of hematite was observed in the sample exposed in an electric furnace, whereas a rim structure consisting of hematite and pyrrhotite were found in the microwave treated sample. Numerous interconnected cracks were only formed in the microwave treated sample due to the arcing effect, and these cracks were not found in the electric furnace treated sample. Under XRD analysis, pyrite and hematite were observed in the electric furnace treated sample, whereas pyrite, hematite and pyrrhotite were found in the microwave treated sample. The results of the pyrite sample leaching experiments showed that the Fe leaching was maximized with the particle size of -325 mesh, sulfuric acid of 2.0 M, ammonium sulfate of 1.0 M, and hydrogen peroxide of 1.0 M. The electric furnace and microwave treated samples were tested under the maximum leaching conditions, the Fe leaching rate was much greater in the microwave treated sample than in the electric furnace treated sample and the maximum Fe leaching time was also faster in the microwave treated sample than in the electric furnace treated sample. Accordingly, it is expected that the microwave heating can enhance (or improve) Fe leaching in industrial minerals as well as pyrite decomposition in gold ores.