• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.973-981
• /
• 2006

Recently there is an increasing interest in particulate matter emission because of new emission regulations, health awareness and environmental problems. It requires to improve particulate measurement techniques as well as to reduce soot emissions from combustion systems. As mentioned above, it is demanded that reduction techniques together with measurement techniques of exhausted particulate matters in combustion systems such as vehicles. However, measurement techniques of particulate matters should be prior to reduction techniques of that because it is able to know an increase and a decrease of exhausted particulate matters when measured particulate matters. Therefore, in this study, we report the measurement of soot primary-particle size using time-resolved laser induced incandescence (TIRE-LII) technique in laminar ethylene diffusion flame. As an optical method, laser induced incandescence is one of well known methods to get information for spatial and temporal soot volume fraction and soot primary particle size. Furthermore, TIRE-LII is able to measure soot primary particle size that is decided to solve the decay ate of signal S $(t_1)$ and S $(t_2)$ at two detection time. In laminar ethylene diffusion flame, visual flame height is 40 mm from burner tip and measurement points are height of 15, 20, 27.5, 30 mm above burner tip along radial direction. As increasing the height of the flame from burne. tip, primary particle size was increased to HAB(Height Above Burner tip)=20mm, and then decreased from HAB=27.5 mm to 30 mm. This results show the growth and oxidation processes for soot particles formed by combustion.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.528-532
• /
• 2013

Well-dispersed slurries of submicron-sized alumina powders were pressure-infiltrated in 3D preforms of mullite fibers and the effects of the particle size and infiltration pressure on the particle packing characteristics were investigated. Infiltration without pressure showed that the packing density increased as the particle size decreased due to the reduction of the friction between the particles and the fibers. The infiltrated preforms contained large pores in the large voids between the fiber tows and small pores in the narrow voids between the individual fibers. Pressure infiltration resulted in a packing density of 77% regardless of the particle size or the infiltration pressure(210 ~ 620 kPa). Pressure infiltration shortened the infiltration time and eliminated the large pores in preforms infiltrated with the slurries of smaller particles. The slurry pressure-infiltration process is thus an efficient method for the packing of matrix materials in various preforms.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.31-36
• /
• 2013

${\beta}$-SiC powders were synthesized by a carbothermal reduction process using $SiO_2$-C precursors fabricated by a sol-gel process using phenol resin and TEOS as starting materials for carbon and Si sources, respectively. The C/Si molar ratio was selected as an important parameter for synthesizing SiC powders using a sol-gel process, and the effects of the C/Si molar ratio (1.4-3.0) on the particle size, particle size distribution, and yield of the synthesized ${\beta}$-SiC powders were investigated. It was found that (1) the particle size of the synthesized ${\beta}$-SiC powders decreased with an increase in the C/Si molar ratio in the $SiO_2$-C hybrid precursors, (2) the particle size distribution widened with an increase in the C/Si molar ratio, and (3) the yield of the ${\beta}$-SiC powder production increased with an increase in the C/Si molar ratio.

• Journal of Powder Materials
• /
• v.19 no.1
• /
• pp.60-66
• /
• 2012

In this study, Platinum(Pt) nanoparticles were synthesized by using polyol process which is one of the liquid phase reduction methods. Dihydrogen hexachloroplatinate (IV) hexahydrate $(H_2PtCl_6{\cdot}6H_2O)$, as a precursor, was dissolved in ethylene glycol and silver nitrate ($AgNO_3$) was added as metal salt for shape control of Pt particle. Also, polyvinylpyrrolidone (PVP), as capping agent, was added to reduce the size of particle and to separate the particles. The size of Pt nanoparticles was evaluated particle size analyzer (PSA). The size and morphology of Pt nanoparticles were observed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM). Synthesized Pt nanoparticles were studied with varying time and temperature of polyol process. Pt nanoparticles have been successfully synthesized with controlled sizes in the range 5-10 and 20-40 nm with cube and multiple-cube shapes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.34-42
• /
• 1999

In late 1997, the portion of registered light-duty diesel vehicle was 25.3% and its emission rate was 17.1% in Korea. Especially, diesel particulate matters(DPM) and NOx are hazardous air pollutants to human health and environment in urban area. The reduction technologies of exhaust emissions from diesel engines are improvement of engine combustion, fuel quality and development of diesel exhaust after treatment , In this study , a light-duty diesel oxidation catalyst(DOC) that is one of the diesel exhaust after treatment was made for performance evaluation and the emission characteristics were tested on CVS-75 mode. And the analysis of the particle size distribution with scanning mobility particle 100, 67.6% and 66.7, 10.0% for Pt and Pt-V catalyst .And for Pt catalyst, the PM increased 7.8% because of increasing sulfate but Pt-V catalyst reduced the PM to 23.0% . Test results of particle size distribution showed that peak values of number and mass densities are respectively 100∼200nm their distribution trend independent of vehicle speed.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.4
• /
• pp.242-246
• /
• 2005

Silver nanoparticles were synthesized by liquid phase reduction method from aqueous silver nitrate solution and borohybride as a reduction agent. The morphology, particle size and shape were influenced by the reaction conditions such as the concentration of $AgNO_3$, a reduction agent and addition of surfactant. The particle size decreased with decreasing the concentration of silver nitrate and using a borohydride. The obtained Ag particles showed the spherical shape with the range of 10-20 nm.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.223-230
• /
• 2020

As a case study on aspect ratio behavior, Kaolin, zeolite, TiO₂, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 mm media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D₅₀, ~6 ㎛ are shifted to submicron size, D₅₀ ~0.6 ㎛ after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

• Resources Recycling
• /
• v.14 no.1
• /
• pp.26-32
• /
• 2005

A study on the preparation of Ag fine particles was performed through a reduction reaction using ascorbic acids as a reductant, which is one of the indispensable processes for the recycling of silver-bearing wastes. Silver nitrate solution in the range of 10~120 mmole/l was used and Tamol NN8906 or PVP was also used as a dispersant in the preparation of Ag fine particles size analyze, SEM, and TEM to determine the particle size and morphology of them. As a result, the reduction reaction of silver ions with ascorbic acid reached equilibrium within 10 min. It was found that about 60% excess of ascorbic acid was required in order to reduce completely silver ions in the solution. The particle size distribution of Ag particles prepared through the reduction reaction showed typically biomodal or trimodal distribution. Especially, initial Ag concentration in the solution, the type and amount of dispersant added during the reduction reaction played an important role in determining the mean particle size of Ag particles.

• Korean Journal of Materials Research
• /
• v.15 no.5
• /
• pp.340-347
• /
• 2005

Silver nanoparticles were synthesized by chemical reduction method from aqueous silver nitrate solution ana hydrazine as a reduction agent. The morphology, particle size and shape were dependent on the mixing method, reaction temperature and time, molar ratio of hydrazine and silver nitrate, the kind of surfactant, and the addition of surfactant. The stability of the colloidal silver was achieved by the adsorption of surfactant molecules onto the particle. Silver nanoparticles have a characteristic absorption maximum at 430 nm under UV irradiation. It was found that the colloid was nanometer m size and formed very stable dispersion of silver. The Ag nanoparticles obtained showed the spherical shape with the size range of 10-30 nm.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2979-2984
• /
• 2014

Silver nanoparticles have been synthesized by liquid-phase and alcohol reduction methods. Silver-doped silica-complex nanoparticles were prepared using a sol-gel process. The formation, structure, morphology, and particle size of the nanoparticles have been studied using several techniques. Silver nanoparticles of size of 30-40 nm were formed successfully by alcohol reduction. TEM images show that both the concentration and the molecular weight of polyvinyl pyrrolidone (PVP) considerably affect the size of the emerging silver nanoparticles. The number of silver-doped silica-complex particles increased by a mercapto-group treatment that showed a narrower size distribution than that of silica treated with amino groups. The silver/polyester and silver-doped silica/polyester masterbatch chips showed excellent antibacterial activity against Staphylococcus aureus and Escherichia coli.