• 한국컴퓨터그래픽스학회논문지
• /
• 제28권4호
• /
• pp.13-22
• /
• 2022

본 논문에서는 최소 입자 단위의 역동적인 회전 움직임을 나타낼 수 있는 MPM(Material Point Method) 기반 단일 프레임워크를 소개한다. 우리가 표현하고자 하는 입자는 다양한 형상(Shape)을 가질 수 있음과 동시에, 선형(Linear momentum), 회전(Angular momentum) 운동을 함께 묘사할 수 있다. 그 결과 기존 구형 입자의 선형 움직임만을 나타내던 입자 기반 시뮬레이션과는 달리, 시각적으로 단일 입자의 역동적인 모습을 표현할 수 있다. 제안하는 프레임워크는 회전 운동을 큰 변형(Large Deformation)으로부터 분해 및 추출 할 수 있다는 점에서 MPM을 활용하였다. 본 기법은 MPM 적분 과정 중 계산되는 변형 구배 텐서(Deformation Gradient Tensor)를 극 분해(Polar Decomposition)하는 과정을 통해 회전 텐서(Rotation Tensor)를 추출하고, 각 입자의 선형 운동과 함께 이를 적용하여 결과적으로 입자 자체의 회전, 선형 운동을 동시에 표현 하는 것이 가능하다. 본 연구에서는 제안하는 기법의 검증을 위해 바람에 흩날리며 회전하는 입자의 모습 및 움직이는 물체와 정지한 입자간의 상호작용 시뮬레이션을 기존 MPM을 이용한 시뮬레이션과의 비교를 통해 진행하였다.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.307-312
• /
• 2014

This study is focused on investigating the relation between the particle size of silver flake powder and mechanical milling parameters. Mechanical milling parameters such as ball size, impeller rotation speed and milling time of the attrition ball-mill were controlled to produce silver flake powder. The particle size of the silver flake powder increased with increasing ball size and impeller rotation speed. The change of the particle size of the silver flake powder with mechanical milling parameters was analyzed based on balls motion in the mill container of the attrition ball-mill. The silver flake particles were formed at the elastic deformation area of the ball due to the collision between balls. The change of the particle size of the silver flake powder with mechanical milling parameters well consists with the change of the collision energy of ball with parameters mentioned above.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.806-817
• /
• 2006

The motion of a small rigid particle in the shear flow near a stationary flat wall is investigated in the context of Stokes flow. The lift force proposed by Saffman and later modified by Mclaughlin and Mei is considered in the prediction of the particle motion far away from the wall. Later, the expression of the lift force is modified to take into account the effect of wall. In the analysis, gravity, lift and drag acting on a small rigid particle near the wall are taken into account. Both analytical and numerical results for the terminal velocities, distances from the wall and trajectories of the particle are presented. In addition, we extended the present analysis to turbulent near-wall flow in the vicinity of the wall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.514-517
• /
• 2004

We have studied motion of micro-particle immersed in liquid crystal (LC) controlled by in-plane field, which is an important technology in the electro-phoretic display (EPD). In the EPD on and off states are decided by movement of these charged particles and response time is influenced by moving velocity of charged particles. In addition, the velocity can be controlled by intensity of applied voltage such that the higher the applied voltage, the faster velocity of particles become. In this study, we investigated particles's motion as functions of applied voltage, temperature of LC, rubbing direction,

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.709-714
• /
• 2000

A splitting method for the direct numerical simulation of solid-liquid mixtures is presented, where a symmetric pressure equation is newly proposed. Through numerical experiment, it is found that the newly proposed splitting method works well with a matrix-free formulation fer some bench mark problems avoiding an erroneous pressure field which appears when using the conventional pressure equation of a splitting method. When deriving a typical pressure equation of a splitting method, the motion of a solid particle has to be approximated by the 'intermediate velocity' instead of treating it as unknowns since it is necessary as a boundary condition. Therefore, the motion of a solid particle is treated in such an explicit way that a particle moves by the known form drag (pressure drag) that is calculated from the pressure equation in the previous step. From the numerical experiment, it was shown that this method gives an erroneous pressure field even for the very small time step size as a particle velocity increases. In this paper, coupling the unknowns of particle velocities in the pressure equation is proposed, where the resulting matrix is reduced to the symmetric one by applying the projector of the combined formulation. It has been tested over some bench mark problems and gives reasonable pressure fields.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.867-872
• /
• 2009

In centrifugal oil filters particles are forced to move toward the filter casing wall by centrifugal force in the rotating oil flow and the particles are trapped and removed on the filter paper installed at the wall. In the present study, flow field of oil and particle motion in a centrifugal oil filter has been numerically calculated in order to estimate the filtering efficiency for various operating conditions. Fluent code was used for the numerical calculations. Uncoupling the oil flow and the particle motion and the use of particle tracking trajectory enabled the estimation of filtering efficiency for various particle sizes, particle density and the filter rotational speed. Higher filtering efficiency was observed for heavier and larger particles as well as higher filter rotational speed. For the typical case of the particle density of $6000kg/m^3$ and the particle size of $10{\mu}m$ at 3500 RPM, the calculated filtering efficiency per passage was 0.31.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.94-99
• /
• 2001

The numerical simulation of the particle dispersion in the vortical flows provides insight into the mechanism of particle-fluid interaction. The simulation results show that the mixing layers are characterized by the large-scale vortical structures undergoing pairing process. The particle dispersion is strongly influenced by the large-scale structures and the particle sizes. The analysis shows that the mixing layers grows like a step-function.

• 호남수학학술지
• /
• 제40권2호
• /
• pp.265-280
• /
• 2018

In this study, we firstly define equations of motion based on the traditional model Newtonian mechanics in terms of the Frenet frame adapted to the trajectory of the moving particle in Lie groups. Then, we compute energy on the moving particle in resultant force field by using geometrical description of the curvature and torsion of the trajectory belonging to the particle. We also investigate the relation between energy on the moving particle in different force fields and energy on the particle in Frenet vector fields.

• 한국컴퓨터그래픽스학회논문지
• /
• 제2권1호
• /
• pp.7-14
• /
• 1996

파티클시스템은 비정형적 물체를 표현하기 위해 모인 기본 파티클들의 집합으로 정의된다. 파티클시스템은 시간에 대해 동적인 성질을 가지므로 연기, 구름, 폭포, 폭발 등과 같이 비정형적이고 시간의 흐름에 따라 변화하는 물체를 표현하기 적합한 모델링방법이다. 그러나 표현하고자하는 물체의 모양이나 변화의 양상이 복잡한 경우 이를 조정하기 위하여 많은 수의 파라미터가 필요하게 되고, 이들 파라미터들의 상호영향을 고려하며 적절히 조절하기가 매우 어려워지게 된다. 또한 파티클의 움직임과 변화를 계산하기 위하여 운동방정식 및 변화함수를 근사화하여 사용하는데 이는 근원적인 부정확성(inaccuracy)을 내포하므로 이런 부정확성을 포함하고 있는 다수의 요인이 결합되었을 때 나타나는 궁극적 결과를 파악하기 어렵다. 본 논문에서는 이런 문제를 해결하기 위하여 기존의 파티클시스템에서의 파티클의 운동 및 변화를 제어하는 데에 퍼지제어기법을 도입하는 새로운 접근방식을 제안하고, 시스템을 구현하여 폭발장면 등을 대상으로 하여 실험한다.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.611-622
• /
• 2016

Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.