Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Effect of Mechanical Milling Parameters on the Particle Size of Silver Flake

은 플레이크 분말의 입자크기에 미치는 기계적 밀링 공정변수의 영향

  • Lee, Gil-Geun (Dept. of Materials System Engineering, Pukyong National University) ;
  • Jeong, Hae-Young (Dept. of Materials System Engineering, Pukyong National University)
  • 이길근 (부경대학교 신소재시스템공학과) ;
  • 정해영 (부경대학교 신소재시스템공학과)
  • Received : 2014.08.07
  • Accepted : 2014.08.21
  • Published : 2014.08.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study is focused on investigating the relation between the particle size of silver flake powder and mechanical milling parameters. Mechanical milling parameters such as ball size, impeller rotation speed and milling time of the attrition ball-mill were controlled to produce silver flake powder. The particle size of the silver flake powder increased with increasing ball size and impeller rotation speed. The change of the particle size of the silver flake powder with mechanical milling parameters was analyzed based on balls motion in the mill container of the attrition ball-mill. The silver flake particles were formed at the elastic deformation area of the ball due to the collision between balls. The change of the particle size of the silver flake powder with mechanical milling parameters well consists with the change of the collision energy of ball with parameters mentioned above.

Keywords

References

  1. J. Oprosky and D. Stotka: USA, US 5,346,651 (1993).
  2. R. G. Reed: USA, US 4,964,948 (1989).
  3. N. I. Liu and R. Meer: USA, US 4,566,990 (1983).
  4. S. M. Towlson: USA, US 5,653,918 (1996).
  5. V. Paneccasio and M. P. Chasse.: USA, US 6,013,203 (1998).
  6. H. W. Cui, D. S. Li, Q. Fan and H. X. Lai: Int. J. Adhes. Adhes., 44 (2013) 232. https://doi.org/10.1016/j.ijadhadh.2013.03.007
  7. H. H. Lee, K. S. Chou and Z. W. Shih: Int. J. Adhes. Adhes., 25 (2005) 437. https://doi.org/10.1016/j.ijadhadh.2004.11.008
  8. H. W. Cui, Q. Fan and D. S. Li: Int. J. Adhes. Adhes., 48 (2014) 177. https://doi.org/10.1016/j.ijadhadh.2013.09.036
  9. H. W. Cui, A. Kowalczyk, D. S. Li and Q. Fan: Int. J. Adhes. Adhes., 44 (2013) 220. https://doi.org/10.1016/j.ijadhadh.2013.03.004
  10. D. Lu and C. P. Wong: Int. Sym. Adv. Packag. Mater., 10 (1998) 48.
  11. D. L. Markley, Q. K. Tong, D. J. Magliocca and T. D. Hahn: Int. Sym. Adv. Packag. Mater., 12 (1999) 16.
  12. W. Songping: J. Mater. Sci. Mater. Electr., 18 (2007) 447.
  13. C. Suyanarayana: Prog. Mater. Sci., 46 (2001) 1. https://doi.org/10.1016/S0079-6425(99)00010-9
  14. ASM International Handbook Committee: ASM Handbook Vol 7 Powder Metal Technologies and Application, ASM International, Ohio (1998) 134.
  15. J. Kano and F. Saito: Powd. Tech., 98 (1998) 166. https://doi.org/10.1016/S0032-5910(98)00039-4
  16. A. Theodore, K. J. Jeon and C. Y. Wu: Kona, 24 (2006) 83. https://doi.org/10.14356/kona.2006011
  17. P. R. Santhanam and E. L. Dreizin: Powd. Tech., 221 (2012) 403. https://doi.org/10.1016/j.powtec.2012.01.037
  18. R. Watananbe, H. Hashimoto and G. G. Lee: Mater. Trans. JIM, 36 (1995) 102. https://doi.org/10.2320/matertrans1989.36.102
  19. G. G. Lee, D. W. Lee, G. H. Ha and B. K. Kim: J. Jpn. Soc. Powd. Met., 43 (1996) 1253. https://doi.org/10.2497/jjspm.43.1253
  20. D. W. Lee, B. K. Kim, G. G. Lee and G. H. Ha: J. Kor. Powd. Met. Inst., 3 (1996) 159.
  21. S. H. Hong and B. K. Kim: Mater. Lett., 51 (2001) 139. https://doi.org/10.1016/S0167-577X(01)00280-4
  22. R. A. Serway and J. W. Jewett: Physics for Scientists and Engineers with Modern Physics, 6th Ed., Cengage Learning Korea Ltd., Seoul (2005) 292.
  23. H. Hashimoto, T. Shinozaki and S. Yashima: J. Chem. Eng. Jpn., 20 (1987) 380. https://doi.org/10.1252/jcej.20.380
  24. S. P. Timoshenko and J. N. Goodier: Theory of Elasticity, 3rd Ed., McGraw-Hill, NewYork (1970) 420.
  25. K. S. Venkataraman and K. S. Narayanan: Powd. Tech., 96 (1998) 190. https://doi.org/10.1016/S0032-5910(97)03368-8

Cited by

  1. Fabrication of Silver Flake Powder by the Mechanical Milling Process vol.23, pp.1, 2016, https://doi.org/10.4150/KPMI.2016.23.1.54