• Transactions of Materials Processing
• /
• v.18 no.6
• /
• pp.482-487
• /
• 2009

A finite element based microstructural modeling for the size dependent strengthening of particle reinforced aluminum composites is presented. The model accounts explicitly for the enhanced strength in a discretely defined "punched zone" around the particle in an aluminum matrix composite as a result of geometrically necessary dislocations developed through a CTE mismatch. The density of geometrically necessary dislocations is calculated considering volume fraction of the particle. Results show that predicted flow stresses with different particle size are in good agreement with experiments. It is also shown that 0.2% offset yield stresses increases with smaller particles and larger volume fractions and this length-scale effect on the enhanced strength can be observed by explicitly including GND region around the particle. The strengths predicted with the inclusion of volume fraction in the density equation are slightly lower than those without.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.475-482
• /
• 2010

Thirty-six Najdi ram lambs, weighing an average of 24 kg and circa 3 months old, were utilized in this trial to evaluate the effects of various alfalfa hay particle lengths in the diet on growth performance, digestion coefficients, nitrogen retention and carcass characteristics. Lambs were randomly allotted to three dietary treatments: 9.5 and 14 mm diets, where alfalfa hay was processed to 9.5 and 14 mm particle lengths, respectively, mixed with 3 parts of concentrate and pelleted as a total mixed ration (TMR), and long hay diet, where one part of loose alfalfa hay (17.8${\pm}$2.4 cm) was offered in combination with 3 parts of only-concentrate pellet. All dietary treatments were homogeneous in their ingredient composition. All lambs were slaughtered after a 14-week feeding trial. Although the results showed no significant effect of hay particle length on DMI, TDN and DCP, lambs fed the 9.5 mm pelleted diet had higher (p<0.05) final body weight, ADG, gain efficiency and nitrogen retention than lambs fed the 14 mm and long hay diets. Altering the particle length of alfalfa hay in diets did not affect the digestibility of DM or CP, whereas digestibilities of ADF and NDF were 3.7% and 5.4% higher (p<0.05), respectively, for the long hay diet versus the 9.5 mm pelleted diet. Hot carcass weight, percentage of separable lean from the $9-11^{th}$ rib joint, and percentages of protein and EE in the separable lean increased (p<0.05) as the particle length of alfalfa hay in the diet decreased. Under the conditions of this study, the reduction of particle length in the TMR played an important role in enhancing performance without altering DM consumption, and this may lead to more efficient productivity of lamb fattening compared with longer chopping lengths.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.322-325
• /
• 2009

An enhanced continuum model for the size dependent strengthening of particle reinforced composites is presented. The model accounts explicitly for the enhanced strength in a discretely defined "punched zone" around the particle in a metal matrix composite as a result of geometrically necessary dislocations developed through a CTE mismatch. The size of the punched zone presents an intrinsic length scale, and this results in the size dependence of the overall behavior of the composite. Results show that predicted 0.2% offset yield stresses are increasing with smaller inclusions and larger volume fractions and this length-scale effect on the enhanced strength can be observed by explicitly including GND region around the particle.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.108-116
• /
• 2003

In this paper, based on the concept of solid particles' sediment problem the working formula determining the bowl length of a Decanter-type centrifuge were derived. Assuming that particles are uniformly distributed along the vertical line of the liquid inlet position, it was possible to derive a constant value k used for determining the bowl length. It was shown from the sample calculations that the bowl length should be increased as the particle size to be removed from the liquid is decreased. The length also should be increased for the same particle size as the bowl diameter is decreased. To help the engineers choose a reasonable bowl diameter, the statistical relationship between the bowl diameter and the capacity of the international products is obtained and presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.296-304
• /
• 2011

In order to design a shear coaxial injector of solid particles with water, basic experiments on a particle laden jet are necessary. The purpose of the present study is to understand the effect of particle loading ratio on the particle spray characteristics (i.e. spreading angle, distribution of particle number density, velocity profiles, and particle developing region length). Hydro-reactive Al2O3 particles with a primary particle diameter of 35~50 ${\mu}m$ are used in this experiment. An automated particle feeder was designed to supply constant particle mass flowrates. Air is used as the carrier gas. To determine the air velocity at the orifice exit, tracers (aluminum oxide, 0.5~2 ${\mu}m$ primary diameter) are also supplied by a tracer feeder. A plain orifice type injector with 3 mm diameter, and 20 mm length was adopted. Particle image velocimetry is used to measure the mean and fluctuating velocity components along the axial and radial directions.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1850-1852
• /
• 1997

In this paper, the behavior and effect of conducting particles in a $SF_6$ insulated electrode system, are presented. It is shown that the bouncing voltage of the particle is independent of particle length, and that the breakdown voltages are affected by the particle length. The longer the particle, the lower the breakdown voltages. The bouncing-off, the lift off and breakdown voltages increase as the particle diameter increase. The breakdown voltage of free particle is lower than fixed particle on the enclosure.

• Mass Spectrometry Letters
• /
• v.2 no.3
• /
• pp.65-68
• /
• 2011

The effects of column length and particle size on the efficiency of separation and characterization of phospholipids (PLs) are investigated using nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry (nLC-ESI-MS-MS). Since PLs are associated with cell proliferation, apoptosis, and signal transduction, it is of increasing interests in lipidomics to establish reliable analytical methods for the qualitative and quantitative profiling of PLs related to biomarker development in adult diseases. Due to the complexity of PLs, the preliminary separation of PLs is necessary prior to MS analysis. In this study, length of capillary column and the particle size of reversed phase ($C_{18}$) packing materials are varied to find a reliable condition for the high speed and high resolution separation using 8 PL standard mixtures. From experiments, it was found that a capillary column of nLC-ESI-MS-MS analysis for PL mixtures can be minimized to a 5 cm long pulled tip column packed with 3 ${\mu}m$ $C_{18}$ particles without losing resolution.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.395-402
• /
• 2002

This paper shows how to formulate the transient analysis of 2-dimensional Hagen-Poiseuille flow using smoothed particle hydrodynamics (SPH). Treatments of viscosity, particle approximation and boundary conditions are explained. Numerical tests are calculated to examine effects caused by the number of particles, the number of particles per smoothing length, artificial viscosity and time increments for 2-dimensional Hagen-Poiseuille flow. Artificial viscosity for reducing the numerical instability directly affects the velocity of the flow, though effects of the other parameters do not produce as much effect as artificial viscosity. Numerical solutions using SPH show close agreement with the exact ones for the model flow, but SPH parameter must be chosen carefully Numerical solutions indicate that SPH is also an effective method for the analysis of 2-dimensional Hagen-Poiseuille flow.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.212-222
• /
• 1994

In the annular Modified Chemical Vapor Deposition process using two concentric tubes, the inner tube is heated to maintain high temperature gradients to have high thermophoretic force which can increase particle deposition efficiency. However, higher axial velocity in a narrow gap between inner and outer tubes can result in a longer tapered entry length. In the present paper, a new concept using an annular jet from the inner tube is presented and shown to significantly reduce the tapered entry length with maintaining high efficiency. Effects of a jet injection on heat transfer, fluid flow and particle deposition have been studied. Of particular interests are the effects of jet velocity, jet location and temperature on the deposition efficiency and tapered length . Torch heating effects from both the previous and present passes are included and the effect of surface radiation between inner and outer tubes is also considered.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.694-697
• /
• 2003

Materials with specific micro-structural shape can exhibit negative Poisson's ratio. These materials can be widely used in structural applications because of their high resilience and resistance to impact. Specially, in the field of artificial implant's material, they have many potential applications. In this study, we investigated the Poisson's ratio and the ratio(E$_{e}$/E) of the elastic modulus of rotational particle structures based on structural design variables using finite element method. As the ratio of fibril's length to particle's diameter increased and the ratio of fibril's diameter to fibril's length decreased fixing the fibril's angle with 45 degree. the negative Poisson effect of rotational particle structures increased. The ratio of elastic modulus of these structures decreased with Poisson's ratio. The results show the reasonable values as compared with the previous analytical results.s.