• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.2
• /
• pp.57-65
• /
• 2022

In this study, the effect of the initial particle size distribution (PSD) of (K_0.5Na_0.5)NbO₃ powders on the microstructure of sintered ceramics was investigated. (K_0.5Na_0.5)NbO₃ powders with uni-, bi-, tri-, and quad-modal PSDs were obtained through a planetary ball-mill. For the specimens sintered at 1080℃, the growth of abnormal grains was promoted from the powders exhibiting quad- and tri-modal PSDs with a high content of large particles, resulting in a microstructure in which huge abnormal grains were predominant. However, as the number of peaks in PSD and the overall particle size decreased, the abnormal grain growth was suppressed and the grain growth of small particles started, resulting in a microstructure with a uniform grain size. For the specimens sintered at 1100℃, huge abnormal grains were not observed due to the decrease in the critical driving force for 2D nucleation even when powders with quad- and tri-modal PSDs were used. It was confirmed that when powder with unimodal PSD was used, a uniform microstructure that was not significantly affected by the sintering temperature could be obtained. The results of this study demonstrate that the microstructure of (K_0.5Na_0.5)NbO₃-based ceramics can be controlled by controlling the particle size of the initial powder.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.10
• /
• pp.1377-1385
• /
• 2009

Effect of inclusion of hard vs. soft wheat bran with different particle size on diet digestibility, growth performance and some slaughter traits was evaluated in fattening rabbits. Four isonitrogenous and isocaloric diets were used according to the origin of wheat bran (hard (HWB) - Triticum durum - and soft (SWB) - Triticum aestivum) combined with wheat bran particle size sieved by 2 mm (fine: 2) or by 8 mm (coarse: 8) in a bifactorial (2${\times}$2) study. A growth trial was conducted to measure the effect of treatments on performance in one hundred and twenty New Zealand White${\times}$Californian rabbits fed experimental diets from 50 to 87 days of age. Faecal apparent digestibility was determined within the last week in twenty animals per diet. Digestibility of nutrients was higher (p<0.05) in the diet containing HWB2, except for crude protein, ether extract and ash, than fine and coarse soft wheat bran diets. Final live weight, feed intake and feed consumption of rabbits on the diet with fine hard wheat bran were higher and resulted in greater daily weight gains (p<0.01) than for animals on the other diets. The slaughter yield and percentage value of organs were not significantly (p>0.05) affected by the diets fed; however, the diet containing fine hard wheat bran led to lower (p<0.05) percentages of skin, abdominal fat and carcass drip loss than the other dietary treatments. It is concluded that fine hard wheat bran can be better included in the diet than soft wheat bran to maximize growth performance without affecting carcass traits of fattening rabbits.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1301-1308
• /
• 1996

In order to save the energy and protect the environment, it were studied about ecomaterials with the developed countries as central figure. In the Metal Matrix Composites(MMCs), this trends appeared the development of the MMCs which had excellent mechanical properties in spite of the low volume fraction of reinforcement. Therefore, in this study, fatigue crack growth test, tensile and hardness test were conducted in order to investigate the mechanical and fatigue properties of 5 %, and 10 % $SiC_{p}$/Al composites. As the results, in the tensile and hardness test, tensile strength and hardness increased but fatigue crack growth rate decreased with $SiC_{p}$/Al volume fraction. And in the view of fatigue failured surface through the SEM, fatigue crack initiated around the SiC particle and in low $\Delta{K}$ regions, fatigue creck detoured the SiC particle but crack propagated through the SiC particle in the high $\DeltaK$ regions.

• Ocean and Polar Research
• /
• v.39 no.4
• /
• pp.245-255
• /
• 2017

There are a number of pieces of evidences that suggest a link between marine diatoms and microorganisms, but knowledge about related microbial communities is greatly lacking. The present study investigated the microbial community structures related to the growth of the marine diatom Cyclotella meneghiniana. We collected free-living bacteria (FLB) and particle-associated bacteria (PAB) at each growth stage (e.g., lag, exponential, stationary and death) of the diatom, and analyzed their bacterial 16S rDNA using pyrosequencing. Metagenomics analysis showed that community structures of FLB and PAB differed considerably with the progress of growth stages. FLB showed higher diversity than PAB, but variation in the different growth stages of C. meneghiniana was more evident in PAB. The proportion of the genus Hoeflea, belonging to the order Rhizobiales, was dominant in both FLB and PAB, and it gradually increased with the growth of C. meneghiniana. However, Enhydrobacter clade tended to considerably decrease in PAB. In addition, Marinobacter decreased steadily in FLB, but first increased and then decreased in PAB. These results suggest that Hoeflea, Enhydrobacter, and Marinobacter may be closely related to the growth of diatom C. meneghiniana.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.87-89
• /
• 1997

The BaTiO$_3$ fine powder was prepared by hydrthermal method using titanium tetrahydoxide (Ti(OH)$_4$) and barium dihydroxide (Ba(OH)$_2$.8$H_2O$) as raw materials. The fine powder was obtained at temperatures as low as 160 to 185$^{\circ}C$. The properties of the BaTiO$_3$ powder were studied as a function of various parameters (reaction temperature, reaction time, Ba/Ti=ratio, etc). The average particle size of the BaTiO$_3$ increased with increasing reaction temperature. After hydrothermal treatment at 17$0^{\circ}C$ for 8 h, the average particle size of the BaTiO$_3$ powder was about 30 nm and the particle size distribution was narrow.

• Journal of Environmental Policy
• /
• v.2 no.1
• /
• pp.77-86
• /
• 2003

Particle-size distributions (PSDs) are widely used for the estimation of soil hydraulic properties. The objective of this study was to select the best model among the nine PSD models with different underlying assumptions, by using a variety of Korean soils. The Fredlund model with four parameters, the logistic growth curve, and Weibull distribution model showed the highest performance compared to the other models with the majority of soils studied. It was interesting to find that the logistic growth function with no fitting parameters showed a great fitting performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1351-1358
• /
• 2000

Two dimensional aerosol dynamics considering the effects of particle generation, coagulation, thermophoresis, sintering and convection has been studied to obtain the growth of non-spherical silica particles in conjunction with determining flame temperature by performing combustion analysis of premixed flat flame. Heat and mass transfer analysis includes 16 species, 29 chemical reaction steps together with oxidation and hydrolysis of SiCl4. The effect of radiation heat loss has also been included. The predictions of flame temperatures and the evolution of particle size distributions were in a reasonable agreement with the existing experimental data.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.386-392
• /
• 2011

We are crystallized to the linear low density polyethylene(LLDPE) particles by a thermally induced phase separation(TIPS). TIPS process based on the phase separation mechanism was performed for the LLDPE system which undergoes liquid-solid phase separation. The linear low density polyethylene particle formation occurred by the nucleation and growth mechanism in the metastable region. Although the growth rates depended on the experimental conditions such as the polymer concentration and temperature, the particles were larger when the polymer concentration was higher or temperature was higher. The particles were observed by SEM. The LLDPE particle size distribution became broader when the polymer concentration was higher.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.103-111
• /
• 1998

Au fine particle dispersed TiO2 film was prepared on silica glass substrate by sol-gel dip and firing process. The films were fabricated from the system of titanium tetraisoproxie-EtOh-HCl_H2O-hydrogen tetrachloroaurate(III) tetrahydrate. The conditions for the formation of the clear solution and dissolving high concentration of Au compound were examined. And a photoreduction process was adopted to control the size of gold metal particles. Phase evolution of matrix TiO2 and variation of Au particle with UV irradiation were investigated by XRDA, SEM, TEM and UV-visible spectrophotometer. And the effect of CPCl(Cetylpyridinium chloride monohydrate) as a dispersion agent was evaluated.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.117-121
• /
• 1998

The Rapid Expansion of supercritical fluid Solutions (RESS) process was applied to particles coating. Experiments were conducted in a fluidized bed with an internal nozzle in the center of the reaction tube. Microcapsules (mean particle size : 49$\mu\textrm{m}$) prepared by spray drying method were used as the core particles. Supercritical CO2 solutions of paraffin were expanded through the nozzle in to the bed that was fluidized by air. Surface morphology prepared particles was observed by SEM. For the inspection of particle size change, particle size distributions were measured before and after coating. The releasing behavior of Mg2+ ions inspected by AA.