• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.405-410
• /
• 1996

The partial substitution of LiTaO3 with Al2O3 caused the variation of dielectric properties and a lower melting temperature yielding an easier growth of single crystal. The lattice constants and Raman band broadening were measured for the LiTaO3 solid solution in which the cations of Li+ and Ta5+ were partially substituted by Al3+ cation. The LiTaO3 type limit phases were obtained. ; Li1.15Al0.45Ta0.7O3 for cationic excess Li1.15Al0.45Ta0.7O3 for stoichiometry Li0.85Al0.05TaO3 for cationic deficit. The second phase was formed beyond the solubility limit. The limit phase (Li0.85Al0.05TaO3) in the region of cationic deficit showed the lowest Cuire temperature of 61$0^{\circ}C$ and melting point of 152$0^{\circ}C$ compared to the solid solutions in other regions (TMp=1$650^{\circ}C$, Tc=69$0^{\circ}C$ for LiTaO3)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.69-72
• /
• 1999

A Well oriented Bi$_2$re$_2$CaCu$_2$O$\sub$8/(Bi2212) superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape using method in which Cu-free BSCO powder mixture was printed on copper plate and heat-treated. And we examined the mechanism for the rapid formation of Bi2212 superconducting films from observing the surface microstructure with heat-treatment time. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Following the partial melting, the Bi$_2$Sr$_2$CaCu$_2$O$\sub$8/ superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. It was confirmed that the phase colony from the phase diagram of Bi$_2$O$_3$-(SrO+CaO)/2-CuO system is similar to the observed result.

• 폴리머
• /
• 제29권4호
• /
• pp.385-391
• /
• 2005

고밀도 폴리에틸렌(HDPE)에 과산화물 가교제인 dicummyl pe개xide(DCP)와 peroxide(PBP)를 각각 첨가하여 반응 용융 가공 조건이 HDPE의 가교 특성에 미치는 영향을 살펴보았다. 용융 가공 시 가교제 첨가에 따라 가교에 의한 용융점도 증가에 의하여 믹서의 토크가 증가하는 것으로 보아 반응 용융 가공에 의한 가교 HDPE가 형성됨을 확인할 수 있었으며 그 결과, HDPE의 용융점도는 증가하며 밀도 및 용융온도 그리고 용융엔탈피의 감소가 초래됨을 알 수 있었다. 가교 HDPE는 HDPE에 비하여 강도가 우수한 반면 상대적으로 낮은 신율을 보이며 이러한 현상은 가교제로 PBP를 사용했을 경우 더 두드러짐을 확인하였다. 가교 HDPE의 기계적 물성은 반응 가교온도 $150^{circ}C$에서 가장 높음을 알 수 있는 반면 반응 가공시간에는 큰 영향을 받지 않음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.478-481
• /
• 2002

We carried out the experiments for fabricating $Bi_{2}Sr_{2}Ca_{2}Cu_{3}O_{x}$(Bi2223) superconductor thick films on Cu tapes. Cu-free (Bi,Pb)-Sr-Ca-0 powder mixtures were screen- printed on Cu tapes and heat-treated at 840-$860^{\circ}C$ for several minutes in air. Surface microstructures and phases of films were analyzed by XRD and optical microscope. The electric properties of superconducting films were examined by the four probe method. At heat-treatment temperature, the printing layers were in a partially molten state by liquid reaction between CuO in the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure, it is thought that Bi2223 superconducting particles nucleate at interfaces between Bi2212 phase and liquid.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.360-364
• /
• 1999

The growth of crystals with high melting point$t_{fus}$$\geq$$1600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with$t_{fus}$$1600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, many oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure${po}_{2}$. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and wasy to forecast theri behavior under growth conditions.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.51-67
• /
• 1999

The growth of crystals with high melting points tfus$\geq$1$600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with tfus》1$600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, any oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure pO2. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and ways to forecast their behavior under growth conditions.r growth conditions.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.535-539
• /
• 2006

가연성 폐기물 가스화반응으로 생성되는 합성가스내의 $CO_2$ 제거반응에서 $Li_2ZrO_3$와 알칼리염 첨가제의 효과를 열중량 분석기를 이용하여 그 특성을 연구하였다. $Li_2ZrO_3$는 고체상태의 $ZrO_2$와 $Li_2CO_3$를 합성하여 제조하였고, 반응성향상을 위하여 $K_2CO_3$, $Na_2CO_3$, NaCl, LiCl 등의 알칼리염을 첨가한 후 열처리하여 사용하였다. 첨가한 알칼리염에 따른 반응성 향상은 $K_2CO_3>NaCl>LiCl>Na_2CO_3$ 순으로 나타났고 이는 $Li_2CO_3$의 partial melting에 기인한 것으로 사료된다. 반응 시료의 SEM 분석 결과 용융상태의 존재를 확인할 수 있었고, XRD를 통해 첨가된 알칼리염들의 화학적 성분 변화는 일어나지 않는 것으로 확인되었다. NaCl을 사용한 경우 반응 초기에 60분 정도의 유도시간이 발생하였으며, $Na_2CO_3$가 첨가된 경우 $700{\sim}750^{\circ}C$에서도 $Li_2ZrO_3$의 $CO_2$ 제거반응에 의해 생성된 $Li_2CO_3$의 분해가 유도되지 않아 반응성 감소현상이 나타나지 않았다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.40.1-40.4
• /
• 2016

Background: This report describes the authors' experience of "melting" septal cartilage after placement of a septal extension graft in a nasopharyngeal cancer patient that had been previously undergone radiation therapy, and provides a review of the literature. Methods: Electronic medical records were used to obtain details of the patient's clinical history. Results: A 32-year-old woman, who had previously undergone radiotherapy for nasopharyngeal cancer, visited our department to for rhinoplasty. Rhinoplasty was performed using a septal extension graft to raise the nasal tip (first operation). Five days after surgery, it was found that the septal extension graft was melting without any signs of infection, that is, the graft had softened, lost elasticity, thinned, and partially disappeared without any sign of infection at 5 days, and thus, the nasal tip was reconstructed with conchal cartilage (second operation). Five months after surgery, it was found that almost all septal cartilage had disappeared without any sign of infection, and thus, the entire nasal septum was reconstructed using 2-mm costal cartilage and an onlay graft was used for tip augmentation (third operation). Conclusions: After cartilage has been exposed to radiotherapy, its patency should be viewed with suspicion. Further studies are needed for determine the mechanism responsible for cartilage damage after radiotherapy.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1213-1220
• /
• 2018

The effects of Cr and Fe addition on the mechanical properties of Ti-6Al-4V alloys prepared by direct energy deposition were investigated. As the Cr and Fe concentrations were increased from 0 to 2 mass%, the tensile strength increased because of the fine-grained equiaxed prior ${\beta}$ phase and martensite. An excellent combination of strength and ductility was obtained in these alloys. When the Cr and Fe concentrations were increased to 4 mass%, extremely fine-grained martensitic structures with poor ductility were obtained. In addition, Fe-added Ti-6Al-4V resulted in a partially melted Ti-6Al-4V powder because of the large difference between the melting temperatures of the Fe eutectic phase (Ti-33Fe) and the Ti-6Al-4V powder, which induced the formation of a thick liquid layer surrounding Ti-6Al-4V. The ductility of Fe-added Ti-6Al-4V was thus poorer than that of Cr-added Ti-6Al-4V.

• 폴리머
• /
• 제36권1호
• /
• pp.41-46
• /
• 2012

본 연구에서는 대표적인 난용성 약물이며, 경구용 천식 치료제 중 하나인 pranlukast의 용해도 및 용출성 개선 제제 개발을 위해 친수성 고분자인 poly(ethylene glycol) (PEG)와 고분자 계면활성제인 poloxamer를 사용하여 열용융법(HM)과 용매증발법(SE)에 의한 고체분산체를 제조하였다. 고체분산체 내 약물의 결정성 변화를 DSC, PXRD로 분석한 결과, 약물의 결정성이 크게 감소하였고, 부분적으로 무정형으로 변화하였음을 확인하였다. 용출시험 및 용해도 분석결과, 고유 약물에 비해 용해도와 용출 속도가 크게 증가하였다. Pranlukast, PEG, poloxamer가 1:5:1의 조성으로 열용융법에 의해 제조된 고체분산체가 가장 우수한 용해도 및 용출속도 향상 결과를 보였다. 결과적으로 PEG과 poloxamer를 이용한 고체분산체 제제는 난용성 약물인 pranlukast의 용해도와 생체이용률을 개선하는데 유용하게 응용될 것으로 기대된다.