• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.384-389
• /
• 2005

The Resonance Scattering Theory(RST) provides the physical explanation of the scattered field that appears in the vicinity of the resonance frequency. The theory suggests that the amplitude of each Partial-wave mode can be divided into two components : resonance and non-resonant background. The long-standing difficulty in the application of RST is that it always requires background components. We have applied the RST to the electromagnetic scattering problems by a penetrable spherical scatterer and a cavity. In this paper, we show some numerical results, and validate background coefficients.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.403-405
• /
• 1999

Power transformers have a tendency of ultra-high voltage and huge capacity as power demand increases day after day. Therefore, the fault by insulation destruction gives rise to large area of power failure in huge capacity transformers. On-line predictive diagnostics is very important In power transformers because of economic loss and its spreading effect. Hence, this study presents experiments of partial discharge method using ultrasonic sensor in order to confirm the possibility of ultrasonic sensor in power transformers. It carries out the experiments of measuring delay time between ultrasonic sensor and transducer, sensitiities by temperature change of oil and by barriers inside transformers. It is also Included wave analysis by ultrasonic sensor for needle-plate electrode powered on through high-voltage equipments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.823-825
• /
• 1995

This paper presents an efficient and robust robot path planning technique that can always find a path, if one exists, in a densely cluttered, unknown and unstructured obstacle environment. The terrain in which the robot is expected to navigate is represented as a tesselated grid of square cells. The generated path is resolution complete and also resolution optimal once the terrain is fully explored by the robot or all the information about the terrain is given. The technique enables the accurate wave propagation to the diagonally adjacent cells and facilitates the implementations of various essential features for a real-time path planner such as partial updates and parallel computations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.777-782
• /
• 2005

In this paper, we designed and fabricated a partial discharge (PD) detector to diagnose the soundness of CNCV cables by analyzing PD pulses and to predict discharge locations. The PD detector is consisted of a coupling network with a discharge free capacitor and a detection impedance, a voltage follower and a low noise amplifier. Lower cut-off frequency of the detector is adjusted at 175kHz to block AC voltage and to pass discharge pulse only. The discharge location could be obtained by the time of arrival method using travelling wave propagation theory. In a laboratory test on an eighty meter CV cable, we could position the discharge location within a two meter error.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.89-96
• /
• 1997

Most civil engineering structures, such as highway bridges, towers, power plants and offshore structures suffer structural damages over their service lives caused by adverse loading such as heavy transportation loads, machine vibrations, earthquakes, wind and wave forces. Especially, if excessive load would be acted on the structure, general or partial stiffness should be degraded suddenly and service lives should be shortened eventually For realistic damage assessment of these civil structures, System Identification method using only structure dynamic response data with unknown input excitation is required and thus becoming more challenging problem. In this paper, an improved Iterative Least Squares method is proposed, which seems to be very efficient and robust method, because only the dynamic response data such as acceleration, velocity and displacement is used without input data, and no information on the modal properties is required. The efficiency and robustness of the proposed method is proved by numerical problems and real single span beam model test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.131-133
• /
• 2007

This paper was described about the calibration method and setup of calibration system. This method and system were based on ISO 12713 and 12714. This system consisted of a conical type reference sensor, test block, glass capillary source and measuring oscilloscope. The waves of reference sensor and tested sensor was shown and these wave was analyzed with ISO method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1888-1890
• /
• 2003

본 논문에서는 XLPE 고체 절연체내의 부분방전(partical discharge:PD)발생 및 진전에 따른 라 방사되는 UHF 대역의 방사전자파를 측정, 분석하고 PD진전에 따른 그 스펙트럼의 특성을 연구 하였다. PD를 모의하기 위해 침을 XLPE 절연체내에 삽입하고 그 사이에 보이드층을 만들었다. 고체절연체의 열화를 고려하여 일정시간 동안 일정 전압을 유지하고 이때 발생되는 방사전자파를 EMI, EMC 안테나(EMCO-3142)와 Spectrum analyzer로 측정, 분석하였다.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.417-423
• /
• 2008

For the evaluation in the safety of outdoor insulator, there are various methods such as: visual observation; voltage measurement; use of ultrasonic wave due to partial discharge; electric field measurement; use of infrared/ultraviolet sensor-type camera. However, many problems have been issued regrading the reliability of the evaluation test and safety of testing operation. Accordingly, the present study has investigated and analyzed the characteristics and mechanisms of the insulator deterioration, in order to obtain an optimal method for detecting poor insulator so that the reliability of power facilities can be enhanced. Besides, based on theoretical analysis of domestic and international detection methods for poor insulator, the reliability has been compared and evaluated quantitatively. As a result, it was shown that the corona camera would be the best choice for domestic workplace application in detecting poor insulator for enhancing the reliability of power transmission line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.28-30
• /
• 2002

The PD in GIS leads to a charge transfer and a voltage drop across the discharge area. They cannot be measure directly but we can measure electromagnetic wave made by PD. In generally, compared with VHF band, electromagnetic waves of UHF band have a low noise therefore, we can detect the real defect with several pC in GIS using UHF method. In this paper, the U-slot microstrip patch antenna for measuring PD signal in GIS is presented. the proposed UHF sensor are designed to have large band characteristics and unaffected structure for GIS operation.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 추계학술발표대회
• /
• pp.856-859
• /
• 2021

Image transmission by means of telecommunications is an essential task for information sharing. For considerable distances, wireless channels can be utilized and tuned for proper uses of image data exchange. However, the disturbances that a radio wave encounter during transmission causes partial or total loss of information. Result of such communications is a distorted image at the receiver's end. This paper proposes an auto-encoder architecture as an image enhancement method for narrow-bandwidth radio images. With this method, a distorted image can be improved for better receiver satisfaction. The proposed auto-encoder is trained with many narrow-bandwidth radio image data; hence it enhances a given distorted image. Also, the results were verified with the original image data being the reference images.