• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.117-124
• /
• 2015

As the acceptance of statistical analysis has been increased because of Big Data, the needs for an advanced second generation of statistical analysis method like Structural Equation Model are also increasing. This study suggests how R-Program, as open software, can be utilized when Partial Least Square Model, one of the SEMs, is applied to statistical analysis. R is a free software as a part of GNU projects as well as a powerful and useful tool for statistical analysis including Big Data. The study utilized R and SmartPLS, a representative statistical package of PLS-SEM, and analyzed internal consistency reliability, convergent validity, and discriminant validity of the measurement model. The study also analyzed path coefficients and moderator effects of the structural model and compared the results, respectively. The results indicated that R showed the same results with SmartPLS on the measurement model and the structural model. Therefore, the study confirmed that R could be a powerful tool that is alternative to a commercial statistical package in the future.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.141-149
• /
• 2004

The automobile equipped with a gasoline engine uses the ignition coil, namely, a high voltage generator, to make the mixed fuel ignited and burned in the combustion chamber, which results in the power to drive the engine. The ignition coil functions to convert a low voltage of the primary into a hiか voltage of the secondary by switching method, which will be transmitted to the electrode. Here, if the ignition coil has a defect even a little, it cannot function well. In this study, it was chosen epoxy molding ignition coil in recently and epoxy resin which is insulation material as specimens, and it was measured the characteristics of the partial discharge occurring to the specimens when those were applied to a voltage, and thereby, it was researched and analyzed the distribution of phase angle, amount and count of discharge due to the changing voltage, And as the result is applying to the actual automobile ignition system, it can be expected the enhancement of the performance of the ignition coil and the reliability of the electrical equipment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.768-775
• /
• 2011

Since error compensation schemes guaranteeing high reliability are required in wireless communication systems for the transmission of the large amount of data, as an efficient error compensation scheme the turbo HARQ scheme combining automatic repeat request and turbo coding has been studied in many places in the literature. In the case of conventional turbo HARQ schemes, the transmitter recognizing NAK signals repetitively sends the whole unit packet to the receiver although the received packet can be partially correctable. Through two successive processes, selection of uncorrectable error data and retransmission of only the relevant parts of the information data, transmission efficiency can be improved. In this paper, we present an error data selection criterion for retransmission using the sign transitions of A Posteriori values and propose a tubo HARQ scheme based on the partial retransmission technique. Through a computer simulation, we show and analyze the performance of the proposed scheme with transmission efficiency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.80-91
• /
• 2002

An on-line ultrasonic detector was developed to continuously monitor the ultrasonic signal due to partial discharge in transformer in service. The on-line ultrasonic detector has a band-pass filter designed to measure only the frequencies from 50 to 300[㎑] of ultrasonic signal, to remove electrical and mechanical noises from outside of the transformer, and tlle ultrasonic sensor contains a pre-amplifier with 60[dB] gain. The ultrasonic signal discrimination algorithm which discriminates the ultrasonic signal duration was developed to remove the ultrasonic signal due to OLTC operation having similar characteristics to those due to partial discharge. The reliability of the on-line ultrasonic detector developed in this study was convinced of measurement the ultrasonic signals from the model. transformer in laboratory and transformer in service.

• Journal of Digital Contents Society
• /
• v.6 no.3
• /
• pp.137-142
• /
• 2005

CDMA scheme has received a great deal of attenttion as a multiple-access method for future mobile networks. Its main advantage: are higher radio capacity and the capacity of flexible data tranmission. And CDMA scheme is a key technology in the proposals submitted to the ITU on next generation multimedia system with integrated services, namely real-time voice services and non real-time data services. In this paper, capacity evaluation of multiple-input multiple-output(MIMO) Multi-Carrier(MC)/CDMA system is considered to mitigate multiple access interference, partial-band interference and enhance system channel capacity in wireless channel. Recently, to increase the spectrum efficiency and the link reliability, MIMO-MC/CDMA scheme is devised to exploit multi-path in a scattering wireless channel. In particular, the channel capacity of MIMO-MC/CDMA system is evaluated according to Eb/No. Mc, p and B. From the results, in order to inappropriate spacing and the signals are frequency overlapped by partial band interference, the channel capacity of MIMO-MC/CDMA system becomes substantially smaller.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.546-550
• /
• 2014

To investigate the minimum near-infrared ray intensity required (quantifiable threshold value) for consistent measurements of axial length (AL) using partial coherence interferometry (PCI), we attached two polarizing lenses (PL) to two types of PCI (IOLmaster, ALscan). The near-infrared ray intensity of PCI was modified by rotating the axis of one PL at intervals of 5 degrees. The right eye of each volunteer was measured three times and the AL and signal-to-noise ratio (SNR) was recorded five times for each measurement. Reduction of light intensity was theoretically estimated using Malus' Law. AL was measured consistently with both IOLmaster and ALscan until they reached 55 degrees (1.33 % of intensity) and 60 degrees (0.77%), respectively (P = 0.343, Log-rank test). In contrast, SNR decreased as light intensity decreased. In addition, to analyze media opacities that precluded measurement of AL, we retrospectively reviewed the medical records of patients unmeasurable by PCI (ALscan) from May to November 2013. Thirty-eight of 473 eyes (8.0%) could not be measured using ALscan due to media opacities, such as severe posterior subcapsular cataract (PSC, 11 eyes), hypermature cataract (9 eyes), and vitreous hemorrhage (18 eyes). The mean grades of vitreous haze and PSC were $7.72{\pm}0.96$ and $4.45{\pm}1.04$, respectively. In conclusion, up to 0.77-1.33% of near-infrared rays decreased, and AL could be measured consistently.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.5
• /
• pp.213-221
• /
• 2002

In order to improve the reliability of XLPE cables, it is necessary to find the useful diagnostic parameter according to long term aging. This paper described the change of partial discharge(PD) phase Properties of XLPE cable insulation with branch type electrical tree degradation. for long term aging. To understand the PD Properties with $\phi$ -q-n distributed shape of XLPE insulation, specimens were prepared by 22.9㎸ distribution cable and made in a type of block(16${\times}$16${\times}$3[mm]). Ogura needles having tip radius of l0${\mu}{\textrm}{m}$ were inserted into each block pieces. The measuring system was consisted of PD detector, digitizer for digital conversion, VXI system for signal processing. The PD properties of the specimens were measured from initiation of tree to breakdown and their characteristics were analyzed. We analyzed the relationship between electrical properties(PD Quantity, PD initiation angle, PD extinction angle, PD occurrence angle : (PD extinction angle - PD initiation angle)) and the normalized aging rate. We found PD parameter, PD initiation angle and occurrence angle, which are a useful diagnostic parameter in estimating the branch type electrical tree for XLPE insulation condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.675-681
• /
• 2022

Recently, with the development of IoT technology and AI, unmanned and automated in various fields, interest in video processing, which is the basis for automation such as object recognition and object classification, is increasing. Various studies have been conducted on noise removal in the video processing process, which has a significant impact on image quality and system accuracy and reliability, but there is a problem that it is difficult to restore images for areas with high impulse noise density. In this paper proposes a filter algorithm based on partial mask and Lagrange interpolation to restore the damaged area of impulse noise in the image. In the proposed algorithm, the filtering process was switched by comparing the filtering mask with the noise estimate and the purge weight was calculated based on the low frequency component and the high frequency component of the image to restore the image.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.563-572
• /
• 2011

Reliability is an essential factor in a navigation system. Therefore, an integrity monitoring system is considered one of the most important parts in an avionic navigation system. A fault due to systematic malfunctioning definitely requires integrity reinforcement through systematic analysis. In this paper, we propose a method to detect faults of the GPS signal by using a distributed nonlinear filter based probability test. In order to detect faults, consistency is examined through a likelihood ratio between the main and auxiliary particle filters (PFs). Specifically, the main PF which includes all the measurements and the auxiliary PFs which only do partial measurements are used in the process of consistency testing. Through GPS measurement and the application of the autonomous integrity monitoring system, the current study illustrates the performance of the proposed fault detection algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.236-239
• /
• 2011

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$(TC IIa) which is a trade name of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$(TC IIa) has been designed in consideration of high Reliability, Availability, Maintainability and Serviceability (RAMS) and low cost of electricity (CDE) for the TC IIa condition based on GL guideline. An integrated drive-train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in partial load operation and grid-friendly system for both 50 Hz and 60 Hz. A pitch-regulated variable speed control system has been introduced to control wind turbine power while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements.