• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.609-616
• /
• 2018

The cargo handling system, which is composed of a fuel gas supply unit and cargo tank pressure control unit, is the second largest power consumer in a Liquefied Natural Gas (LNG) carrier. Because of recent enhancements in ship efficiency, the surplus boil-off gas that remains after supplying fuel gas for ship propulsion must be reliquefied or burned to regulate the cargo tank pressure. A full or partial liquefaction process can be applied to return the surplus gas to the cargo tank. The purpose of this study is to review the current partial liquefaction process for LNG carriers and develop new processes for reducing power consumption using exergy analysis. The developed partial liquefaction process was also compared with the full liquefaction process applicable to a LNG carrier with a varying boil-off gas composition and varying liquefaction amounts. An exergy analysis showed that the Joule-Thomson valve is the key component needed for improvements to the system, and that the proposed system showed an 8% enhancement relative to the current prevailing system. A comparison of the study results with a partial/full liquefaction process showed that power consumption is strongly affected by the returned liquefied amount.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.701-709
• /
• 2011

In semiconductor wafer fabrication, etching is one of the most critical processes, by which a material layer is selectively removed. Because of difficulty to correct a mistake caused by over etching, it is critical that etch should be performed correctly. This paper proposes a new approach for etch endpoint detection of small open area wafers. The traditional endpoint detection technique uses a few manually selected wavelengths, which are adequate for large open areas. As the integrated circuit devices continue to shrink in geometry and increase in device density, detecting the endpoint for small open areas presents a serious challenge to process engineers. In this work, a high-resolution optical emission spectroscopy (OES) sensor is used to provide the necessary sensitivity for detecting subtle endpoint signal. Partial Least Squares (PLS) method is used to analyze the OES data which reduces dimension of the data and increases gap between classes. Support Vector Machine (SVM) is employed to detect endpoint using the data after PLS. SVM classifies normal etching state and after endpoint state. Two data sets from OES are used in training PLS and SVM. The other data sets are used to test the performance of the model. The results show that the trained PLS and SVM hybrid algorithm model detects endpoint accurately.

• Journal of Chest Surgery
• /
• 제18권2호
• /
• pp.193-204
• /
• 1985

During the period from February to March, 1984, we employed a partial left heart bypass [left atrium to ascending aorta] in 2 patients who could not weaned from cardiopulmonary bypass with inotropic agents and cardiac pacing after coronary bypass surgery. These two patients showed significant improvement in ventricular function 18 to 47 hours after inserting the left heart bypass and were able to wean from the left heart bypass under using inotropic agents. Two patients died of multiple organ failures 11 days and 15 days postoperatively. These results indicate that early institution of left heart bypass in ventricular failure patients after open heart surgery can provide satisfactory long-term result.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1288-1300
• /
• 1994

Mathematical modeling and numerical calculation on the flow and thermal characteristics induced by fire in a partial enclosure are performed. The solution procedures include the Shvab-Zeldovich approximation for the physical transport equations, low Reynolds number k-.epsilon. model for the turbulent fluid flow and Discrete Ordinate method(DOM) to calculate the radiative heat transfer. PMMA(Polymethylmethacrylate) is adopted as a solid fuel. Two different cases are considered : combustions with and without gas radiation occuring in a open cavity for variable pyrolyzing location of PMMA. When the fire source is located at the left-wall, the flow region of flame gas is limited at the left-wall and ceiling and recirculation region of inlet gas is formulated at neat the floor. In case of neglecting the radiative heat transfer, more large flame size and higher temperature is predicted. It is essential to consider the radiative heat transfer for analysis of fire phenomenon.

• 동굴
• /
• 제67호
• /
• pp.53-63
• /
• 2005

자연동굴은 오랜기간 동안 생성된 귀중한 문화유산이며 관광자원이다. 우리나라에는 많은 석회동굴과 용암동굴이 분포하고 있다. 그중 천연기념물과 지방기념물로 각각 21개가 지정되어 있고 관광동굴로 개발된것이 12개이다. 본 연구 결과 기념물로 지정된 동굴은 강원도와 제주도에 많이 분포하고 있으며 관광동굴은 강원도와 충청북도에 많이 분포하고 있다. 12개 관광동굴을 대상으로 각 동굴 주변에 분포하고 있는 주요관광자원과 연계성을 살펴본 결과 자연적 관광자원과의 연계성이 높은 것으로 나타났다. 관광동굴의 효과적인 관광자원화를 위해서는 주변 관광자원과의 연계를 고려한 관광루트 및 관광상품의 개발이 필요하다.

• Communications for Statistical Applications and Methods
• /
• 제2권1호
• /
• pp.194-200
• /
• 1995

The baker's transformation is an ergodic transformation defined on the half open unit square. This paper considers the limiting begavior of the partial sum process of a martingale sequence constructed from the baker's transformation in the context of an invariance principle of a uniform central limit theorm.

• East Asian mathematical journal
• /
• 제19권1호
• /
• pp.63-71
• /
• 2003

In his invited lecture presented during the First Conference of the Mathematical Society of the Republic of Moldova($Chi\c{s}in\v{a}u$, August 2001) W. A. Dudek posed several open problems on the role and properties of the skew element in the theory of n-ary groups. In this note we give the partial solutions of some of these problems.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.38-45
• /
• 2021

The photovoltaic module has the characteristic of changing its output characteristics depending on the amount of radiation and temperature, where the arrays that connect them in series and parallel also have the same characteristics. These characteristics require the MPPT technique to find the maximum power point. Existing P&O and IncCond cannot find the global maximum power point (GMPP) for partial shading. Moreover, in the case of Improved-GMPPT and Enhanced Search-Skip-Judge-GMPPT, GMPP due to partial shading can be found, but the variation in the open voltage during temperature fluctuations will affect the operation of the Skip and will not be able to perform accurate MPPT operation. In this study, we analyzed the correlation between voltage, current, and power under solar module and array conditions. We also proposed a technique to find the maximum power point even for temperature fluctuations using not only the amount of radiation but also the temperature coefficient. The proposed control technique was verified through simulations and experiments by constructing a 2.5 kW single-phase solar power generation system.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.611-628
• /
• 2012

The inelastic earthquake response of existing, reinforced concrete buildings with an open ground story, designed according to the old Greek codes, is investigated before and after their seismic strengthening with steel braces restricted to the open ground stories. The seismic performance evaluation is based on Part 3 of Eurocode 8 for assessment and retrofitting of buildings. Three and five-story, symmetric and non-symmetric buildings are subjected to a set of seven pairs of synthetic accelerograms, compatible with the design spectrum, and conclusions are drawn regarding the effectiveness of the strengthening solutions. Seismic behavior of the selected models confirms results of previous work regarding the insufficient capacity of the open ground stories for design level earthquakes. It is also shown that strengthening only the weak ground story, a choice having the substantial advantage of low cost and continued usage of the building during its seismic retrofitting, can remove the inherent weakness without shifting the problem to the stories above and thus making such buildings at least as strong as those without a weak first story. This partial strengthening is possible for symmetric as well as eccentric buildings, in which torsion plays a further detrimental role.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권11호
• /
• pp.179-190
• /
• 2021

The purpose of this study is to understand the impact of influencers on generation Z (Gen Z) in the online environment. This article has applied the theories of source credibility, TAM, IAM, and TPB to identify influencer characteristics that affect the purchasing behaviors of Gen Z customers. This research was conducted using a Google Form survey with 24 pre-designed questions. A total of 464 valid questionnaires from Gen Z Vietnamese were collected between November 2020 and January 2021. Data was analyzed using partial least squares structural equation modeling (PLS-SEM) with SmartPLS 3 software. The analysis results confirmed that the components of influencer credibility have a positive impact on Gen Z's purchasing behaviors under the mediated influence of argument quality, perceived usefulness, and social influence. Surprisingly, for Gen Z, the influencers' attractiveness has the strongest impact on their online behavior. More specifically, attractiveness plays the most important role in the perceived usefulness and social influence of Gen Z customers, while influencers' expertise has the strongest impact on argument quality delivered to customers. This study provides evidence of a change in the way Gen Z responds to marketing activities. They are more drawn by the attraction of influencers than their expertise.