• Animal Systematics, Evolution and Diversity
• /
• v.36 no.2
• /
• pp.123-127
• /
• 2020

This paper reports four species of Erebidae from the southern part of Korea: two Boletobiinae, Honeyania ragusana (Freyer, 1845), Enispa masuii Sugi, 1982, one Hermininae, Adrapsa ablualis Walker, 1859, and one Arctiinae, Stictane rectilinea (Snellen, 1879). Honeyania ragusana can be distinguished by the following: a blackish dot on the apex of the forewing with strongly curved medial lines, a long slender uncus and a strongly distally bifurcated valva with a large distally expanded costa and a thumb-shaped process of sacculus on the male genitalia as well as a sclerotized antrum, strongly tapered ductus bursae, and large corpus bursae on the female genitalia. Enispa masuii, a lichen feeder, can be distinguished by the whitish medial lines of the grayish fore- and hindwings, and a pair of rounded ball-shaped lamella antevaginalis, long, sclerotized ductus bursae, and pear-shaped corpus bursae without signum of the female genitalia. Adrapsa ablualis can be distinguished by the whitish medial lines of the fore- and hindwings and large medial process of the costa and dentate distal margin of the valva of the male genitalia. Stictane rectilinea can be distinguished by the broad dark grayish medial band of the forewing and the long knife-shaped valva with a strongly hooked process on the distal part of the sacculus of the male genitalia.

• The Korean Journal of Zoology
• /
• v.4 no.1
• /
• pp.29-31
• /
• 1961

At the altitude of approximately 250 of Mt. Sori located in Kyung-gi Co, Korea authers have made a field collection of Drosophila during June, 1 and 15, 1961, and found about 30 specimens which seemed to be a new species belonging to Genus Drosophila, Subgenus Hirtodrosophila. AUthors have named the species : D. macromaculata sp. nov. " Its Korean name is given , : Uluck-muni-chopari". This species is very similar to Drosophila cheda in its external feature and especially it that each of four stripes in the mesonotum is cut into tow, and it also resembles with Drosophila calloptera in that it has three distinct spots in the wing. Its first segment of abdomen is yellow-brown in color while both end points are black. The second segment is black and in its middle part there yellow-brownish strips of V form, the peripheral part of which are found two spots of yellow brownish color. On third to fifth segments of male and on third to sixth segments of female there are fod-form spots, one on each segment, and on both sides of these rods two smaller spots are found in each segment. This species is clearly a fungus feeder and its breeding in authers laboratory is at present, not attained. Holotype : male , Kwang-nung, Kyung -gi Do, South Korea, 1 Male June, 1, 1961. Allotype : female, collected together with holotype. Paratype : Kwang-nung, Male 16 and female 12. Distribution : South Korea. Collecting method : Net sweeping on the decayed trees.yed trees.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.129-136
• /
• 2012

On this study, $CO_2$ gas, net of Ar gas, and mixed gas in solid wire(AWS ER 70S-6) and flux cored wire(AWS E71T-1) were used to weld on Mild steel(SS400). After the progress, the status changes of the welds in Mild steel(SS400) were investigated with compositional changes. For stable experiments, welding was conducted using the automatic feeder. Radiation testing, hardness testing, chemical composition analysis and penetrated cross-section were measured. Through these experiments, shapes of penetrated cross-section, chemical composition changes, and weld defects according to the variation of welding gas were known. Weld defects and weld cross-sectional shapes by the variation of the welding voltage were also detected.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.4
• /
• pp.111-117
• /
• 1998

In order to increase productivity of an assembly system composed of multiple robots along a conveyer line, an efficient sequence planning is necessary because the assembly time is dependent upon the assembly sequence. In this paper, a two-robot assembly system is considered in which two robots operate simultaneously and transfer parts from the part feeders to the workpiece on the conveyer one by one. In this case, the distance from the feeder to the workpiece varies with time because the workpiece moves at a constant speed on the conveyer. Hence, the sequence programming is not a trivial problem. Also, the two robots may interfere with each other kinematically and dynamically due to the simultaneous operation, so the sequence should be programmed to avoid the interferences. In this paper, the task sequence optimization problem is formulated and is solved by employing the simulated annealing which has been shown to be effective for solving large combinatorial optimizations.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1885-1891
• /
• 2010

Recently metropolitan local governments is actively introducing urban railway's expand and light rail transit as a means of new transport system. DC electricity feeder system operating in the domestic urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit with respect to a given structure. Stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. At the place where the current leaves the rail and metallic structures, electrolytic corrosion may take place. This paper presents comparison analysis of field test methods based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.305-310
• /
• 2010

DC electricity feeder system operating in the urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is flowed on a structure that is not part of the intended electrical circuit with respect to a given structure. This paper presents comparison analysis of field test cases based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems. As a result of it, we confirmed that measurement methods are different from each other about the same tests. Therefore measurement methods to prevent electrolytic corrosion need to establish electrical facilities standards to be applied domestic.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.54-58
• /
• 2012

This paper is purposed to analyze electric leakage component which can prevent electrical fires on breaker capacity expansion and power failure by operation of ELB(Earth leakage breaker) for stable sizes. In order to analysis for electric leakage component for stable sizes, this paper studied field state investigation which are at stable companies( 10 companies) in cheong-won location to deduce the problems of electric leakage component is analyzed. The field state experiment method is measured with electric leakage component which load part of ELB detected by electric loads(electrical fan, lighting, auto waterer, feeder and halogen lighting) and stable sizes. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in stable.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.33-39
• /
• 2015

Power supplying capacity of the distribution feeder should be maintained within thermal capacity of the wire. This paper presents the minimum spanning tree based load balancing technique to release multiple overloading of distribution feeders. In order to minimize number of involved backup feeders, Dijkstra and Prim algorithm are adopted to construct minimum spanning tree. Simulation testing result based on part of KEPCO's commercial distribution systems shows effectiveness of proposed scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.171-179
• /
• 1994

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implemen- tation details (such as robot selection, accessory design, and spatial layout) together with operation details, the computer aided design and analysis method should be sought. However, conventional robotic design systems and off-line programming systems cannot accommodate these inquiries in a unified fashion. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL (Simulation Package for Robotic Painting Line) users can design the painting objects (via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workpace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS).

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2018

Aloe gel layer is well known as raw materials of medicines and cosmetics due to their antioxidant and anti-inflammatory properties. In aloe gel extracting process, the outer part of the leaf was removed. It contains high quality of fiber and many nutrients. However, this part is thrown away and generally used as fertilizer. The purpose of this research was to examine the important nutrient of Aloe saponaria. Moreover, the feasibility of using aloe as a dietary supplement by feeding fermentation treatment of aloe was investigated. To do this, the aloe leaf was divided into several parts including leaf skin, bottom of the leaf, tip of the leaf, middle of the leaf, and leaf flesh. Then the saponin content were analyzed from each part. The extraction method was used to clarify the saponin content. The aloe then fermented to improve it benefit. The fermented Aloe then given as dietary food to group of pig. Finally, the appropriate feed level was determined and the pork meat quality was analyzed. The extraction of saponin shows that the highest concentration of saponin located on the skin of the leaf. The feeding experiment shows that there is no significant difference in pig growth without aloe dietary food and groups with aloe as dietary food. It was conclude that fermented aloe can replace the pigs normal feeder as an alternative feeding solution.