• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2349-2354
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2317-2322
• /
• 2009

In this paper, look into the applicable communication for unmanned vehicle system development, and make an alternative idea to IEEE 802.11a. "IEEE 802.11a" is differently from "IEEE 802.11b/g"-which used to 2.4GHz ISM band-as it use OFDM modulation system of 5GHz band, as contrasted with "IEEE 802.11b/g" of ISM band, it has advantage against falling-off the capability caused by interfered, and provide maximum 54Mbps communication speed. Made a priority tested Soft Roaming and Hard Roaming to ensure the sound boom of unmanned vehicle in the flat parking. According to the each effect value, Present a most suitable method of applicable to "IEEE 802.11a" to unmanned vehicle system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.60-67
• /
• 2006

To improve the vehicle fuel economy, various technologies have been studied. Meanwhile it deteriorates fuel economy that the increased driving torque for Power Steering System (PSS) due to weighted vehicle and widened tire for low speed driving and parking. So the larger driving torque for PSS is, the lower fuel economy is. Therefore, the study about the effect of the driving torque for PSS and the engine total friction must be preceded to improve the vehicle fuel economy. In this study, a PSS module separated from the vehicle is used to measure the driving torque for PSS with respect to the pressure of PSS. The result shows that the driving torque for PSS was in direct proportion to the pressure of PSS 3 (N-m) driving torque for PSS vs. 10 (bar) pressure of PSS, and 8 (N-m) vs. 40 (bar). In addition, the driving torque and pressure for PSS was measured according to the engine speed in the component test condition which was in the vehicle condition. Measuring the driving torque for PSP in the vehicle condition was established by using the VeFAS which was a fuel economy analyzer developed in our lab and installing PSS By-pass line. The effect of the driving torque for PSS on the vehicle fuel economy was analyzed with FTP-75 cold start mode.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.1-12
• /
• 2008

The issues of developing the value added services for public transport connectivity and transfer with information and communication technologies has been discussed in terms of incorporating system facilities with public transit modes to increase the ridership of public transit. This paper demonstrates a conceptual model for providing the location based public transit transfer information service on demand with respect to system requirements, subsystems, and logical architecture based on the national ITS architecture. The subsystems in this study which include transfer information center, parking concierge, user route guidance and information provision system are also investigated in detail in order for information service and/or contents provider to develop business models on public transit connectivity and transfer. This model is expected to be utilized in providing the variety of service models with the different types of public transit connectivity and transfer systems according to the system scale and the public transit modes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.355-358
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.365-373
• /
• 2014

This study is to analyze the physical environment and conduct spatial data for bicycle road system in changwon. Index for evaluation index was developed based on literatures. Then the level of importance and weight have been modified through experts review. Finally, index with eight categories such as greenness(40% over), bicycle road connectivity(1.8, 9.8%), road type bike(bicycle lane, 24.4%), pave type(asphalt 72.5%), illegal parking(none, 93.9%), bike road surface visibility(exist, 46.8%), vehicle speed limits(30km, under), vehicle traffic(500/hr under, 44.3%) have been applied to empirical investigation. Collected data has been hierarchically classification by ArcGIS Program. The Highest grades(score 31-35, level 1) occupied 35% of target destination. High level of greenness and load type has contributed to high score. In addition, average level of greenness of those destination was 35% and higher, which provide high degree of security and freshness for bicycle riding. Meanwhile, lowest level(level 5, which earned 15 point or less) occupied 24.5%. illegal parking, low level of greenness, and no surface sign caused low score.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.25-43
• /
• 2016

This research was completed to provide fundamental data regarding the guidelines to installing and managing utility facilities & structures in wetland protected area to advance the functions and sustainable use of ecology services by preserving the ecology within wetland protected area. There were 5 on-site researching areas that were used as the main subject with these areas chosen and considered from 21 inland wetlands that have been designated and are being managed from the Ministry of Environment and by their designated dates as a wetland protected area. The utility facilities in these wetland areas were categorized by their types and a detailed on-site investigation was proceeded with investigation items chosen whereas these facilities are working by their roles from their location, size, used materials, types, information contents and etc., The results showed that regarding informational structures, several locations of information boards were distanced from the main exploring routes which did not consider the visitor's eye level which had their readability dropped and by sunlight, time lapse and water penetration, many information boards were damaged or corrupted so that it was hard to confirm the information noticed or understanding an image. Insufficient observation and educational structures were installed that considered the ecological characteristics of wild animals and their living conditions. Regarding convenience facilities, there were parking lots that were installed on the fore-land and to decrease non-point solution sources, some parking lots needed to be located in protected lowlands while some facilities' shape and colors did not harmonize with their natural surroundings, creating a sense of awareness, which will need some more consideration. As for safety facilities, they were very insufficient compared to other facilities. This means that additional safety structures are needed so that related personnel can be aware of where a visitor is located when an accident occurs. Protectional facilities strongly needed new structures and a management system to cut off entrances and do surveillance so that visitors do not go into areas outside of the managed areas and bring damages to restricted locations. Research labs needed to expand the use of automatic weather systems and water gauge equipments to build fundamental data regarding floodgates that are intimated to the forming of wetlands. Sensor cameras and other types of monitoring systems are needed to monitor the majority types of animals living in the wetlands as well.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.359-365
• /
• 2017

Impermeable surfaces such as transportation land uses including roads and parking lots accumulate high heavy metals and particulate matters concentration especially during dry season which worsens the river water quality and distort the water circulation system during rainfall events. Recently, the government has been promoting policies to install Low Impact Development (LID) facilities such as permeable pavements or grass blocks in parking lots or pavements. However, transition of asphalt-paved surfaces to permeable pavement generated asphalt wastes which are detrimental to the environment and has cost implications due to its removal and disposal. Therefore this study was conducted to provide a method of constructing a cost-effective permeable pavement to reduce waste generation and cost. In this study, comparative analysis of the water circulation capacity and economic efficiency of the traditional construction method and new method proposed in this study through the lab-scale experiment. The proposed method was to make holes in existing asphalt pavements, layout geotextile fabric and permeable base media such as sand before compaction. After compaction, layout grass blocks on the compacted base media then layout sand in between each grass blocks before compaction. Apparently, there was no significant difference between the traditional installation method of permeable pavement and the proposed method in this study considering surface runoff, infiltrated volume, stored volume, and rainfall-runoff delay time. The proposed method in this study generated 86% less wastes compared to the traditional installation method and has 70% cost reduction considering asphalt removal and disposal. The construction method proposed in this study yielded similar performance compared to the traditional installation method and water circulation effect, but was proven to be less complicated and economical.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.405-411
• /
• 2016

Seoul city is publishing new plans to increase modal share rate of bicycle every year, such as, maintaining bicycle related facilities. But bicycle's modal share rate in Seoul stayed same for the last decade and people are still facing difficulties using bicycle related facilities. These problems are causing bicycle usage as connecting transportation of public transit to decrease. This study looked at the high bicycle modal countries, such as, Netherlands, Germany and Japan to find applicable solutions by analyzing cases and comparing them with cases of highly populated subway station of Sindorim in Seoul. For example, in Germany and Netherlands there is bicycle-parking system to help bikers to access subway easier, in Japan there is underground bicycle parking tower to safely keep high volume of bicycles with in small space. For Seoul city to increase its modal share rate, they should look at problems from users' prospective and solve it by fixing it and improving the services, not by making more facilities.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.343-351
• /
• 2018

Renewable energy sources has drawn considerable attention as clean energy sources because of changing public attitudes regarding greenhouse gas and fine dust. Recently, in this respect, the government provides the drivers of electric vehicles with various benefits such as tax reduction, financial incentives and free parking from the public to the private sector. Plug-in electric vehicles are the most common in the private sector. Otherwise, different types of battery-based buses in the public sector are being developed, and there are three main types of charging: plug-in, battery swapping and wireless. Therefore, economic assessment of charging types in each bus route is required in order to facilitate the use of battery-based buses instead of the existing CNG buses. In this paper, net present value(NPV) and B/C ratio of charging types are evaluated in consideration of the bus schedule, the cost of charging station, and the life cycle of battery, etc. per each bus route. In case study, main bus routes in Daegu City are simulated with the proposed evaluation method to validate the eco-bus project.