• 수산경영론집
• /
• 제36권2호
• /
• pp.1-24
• /
• 2005

The purpose of the study are summarized as follows : First, it has researched the possibility of the Distribution Information application in Sea Food Wholesale Market. Second, the effects which the Wholesale Market Company and the Intermediary Wholesaler Corporations can obtain in Sea Food Wholesale Market by building up a Distribution Information are classified into the effects of task, cost, and competition. It has analyzed the influence of these effects in direct and indirect Trust between the Wholesale Market Company and the Intermediary Wholesaler. Third, it has recognized the upcoming problems in Sea Food Wholesale Market by building up a Distribution Information, and it has suggested a plan to make the Distribution Information application successful in Sea Food Wholesale Market. This study has used a questionnaire to verify 5 hypotheses. Research model, factor analysis, correlation relationship analysis. The result of this study are summarized as follows : Building up the Distribution Information influences positively on the effectiveness of task, cost and competitiveness regardless of it being the Wholesale Market Company or the Intermediary Wholesaler corporation. However, the results of this analysis are to verify differences according to the degree of construction of the Distribution Information and the degree of the perception of the problems between the Wholesale Market Company and the Intermediary Wholesaler corporations have shown that there were distinct differences in the degree of computerization and of efforts to build a Distribution Information. Also there were distinct differences according to the degree of perceiving problems relating to building up the Distribution Information and the stages of the Distribution Information between the Wholesale Market Company and the Intermediary Wholesaler corporations. This study suggest three important steps that will help to establish a successful Distribution Information. First, the Wholesale Market Company and the Intermediary Wholesaler corporations should make efforts to increase mutual profits in partnership, and make direct Trust by sharing mutual information. Second, the lack of understanding of the Distribution Information between departments within the company requires educating employees about the Distribution Information. It is necessary to expand the communication networks of the Distribution Information between the Wholesale Market Company and the Intermediary Wholesaler. Third, mutual exchange of Information should be possible to offer systematic exchange of Information between the Wholesale Market Company and the Intermediary Wholesaler corporations.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.66-74
• /
• 2018

In order to evaluate the precision degree of the blocks on the dock, the shipyards recently started to use the point cloud approaches using the 3D scanners. However, they hesitate to use it due to the limited time, cost, and elaborative effects for the post-works. Although it is somewhat traditional instead, they have still used the electro-optical wave devices which have a characteristic of having less dense point set (usually 1 point per meter) around the contact section of two blocks. This paper tried to expand the usage of point sets. Our approach can estimate the rework time to weld between the Pre-Erected(PE) Block and Erected(ER) block as well as the precision of block construction. In detail, two algorithms were applied to increase the efficiency of estimation process. The first one is K-mean clustering algorithm which is used to separate only the related contact point set from others not related with welding sections. The second one is the Concave hull algorithm which also separates the inner point of the contact section used for the delayed outfitting and stiffeners section, and constructs the concave outline of contact section as the primary objects to estimate the rework time of welding. The main purpose of this paper is that the rework cost for welding is able to be obtained easily and precisely with the defective point set. The point set on the blocks' outline are challenging to get the approximated mathematical curves, owing to the lots of orthogonal parts and lack of number of point. To solve this problems we compared the Radial based function-Multi-Layer(RBF-ML) and Akima interpolation method. Collecting the proposed methods, the paper suggested the noble point matching method for minimizing the rework time of block-welding on the dock, differently the previous approach which had paid the attention of only the degree of accuracy.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.631-638
• /
• 2022

Microgrid, which enables the production and consumption of electricity to be done independently on a small scale, has been studied on one of the solutions of reinforcement for flexibility of electronic system. This study examined the application effect of new microgrid by applying hybrid battery in electric power storage device. We designed the system to highlight the advantage of each battery and complement the disadvantage by using hybrid system with Lithium-ion battery and interval Redox flow battery. It runs with lithium-ion battery during the initial startup while the Redox flow battery operates for a long time at the end of excessive period, and it enables a discharge of Lithium-ion and Redox flow battery at the same time when the load has a large output. We chose Maldives as a subject of this study for organizing and optimizing independent microgrid. Maldives is the country to accomplish 100% domestic electricity in South Asia, but the whole electric power is supplied through diesel generation imported fossil fuel. We organized and optimized microgrid for energy independence on Malahini island to solve Maldives energy cost problem and global energy environment matters. We analyzed the daily power supply and accumulated the power supply from September 18, 2018~February 11, 2019. The accumulated power supply was about 120.4 MWh and the daily power supply was about 800~1000 kWh. Based on the collected information, we divided the cases into three models which are only diesel generator, solar generator as well as diesel generator, and solar+ESS+diesel generator. We analyzed the amount of oil consumption compared to the cost of construction and power output. The result showed that solar+ESS+diesel generator was most economically feasible. As well, we obtained that our considering hybrid battery system reduced the fuel consumption for diesel power generation about 10~15%.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.87-93
• /
• 2014

본 연구에서는 기존의 일방향 나사산 커플러 이음을 개선한 양방향 나사산 체결방식을 활용한 완전밀착형 커플러를 제안하고 시공성을 분석하였다. 시공성을 분석하기 위해 실물 실험 모형을 설치하여 실험하였다. 수평철근은 매트기초의 수평철근을 대상으로 실험하였다. 수직철근의 경우 기존 선조립 커플러 이음 공법의 문제점을 분석하여 반조립 커플러 이음 공법을 제안한 후 적용하였다. 적용결과 수평철근의 경우 D25와 D29 모두 양방향 나사산 커플러 이음의 체결시간이 기존 커플러 이음보다 짧은 것으로 나타났다. 수직철근은 반조립 형태로 배근할 경우 기둥 주근 한 개를 약15초에 체결할 수 있는 것으로 나타났다. 기존 현장 조립 커플러 이음에 비해 쉽고 안전하게 작업할 수 있고, 철근을 완전하게 밀착시킬 수 있기 때문에 품질 및 비용, 공기 측면에서 충분히 활용가능할 것으로 판단된다.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.115-124
• /
• 2019

In a climate change environment where heat damage and drought occur during a rainy season such as in 2018, a vegetation-based LID system that enables disaster prevention as well as environment improvement is suggested in lieu of an installation-type LID system that is limited to the prevention of floods. However, the quantification of its performance as against construction cost is limited. This study aims to present an experiment environment and evaluation method on quantitative performance, which is required in order to disseminate the vegetation-based LID system. To this end, a 3^rd quartile huff time distribution mass curve was generated for 20-year frequency, 60-minute probable rainfall of 68mm/hr in Cheonan, and effluent was analyzed by recreating artificial rainfall. In order to assess the reliability of the rainfall event simulator, 10 repeat tests were conducted at one-minute intervals for 20 minutes with minimum rainfall intensity of 22.29mm/hr and the maximum rainfall intensity of 140.69mm/hr from the calculated probable rainfall. Effective rainfall as against influent flow was 21.83mm/hr (sd=0.17~1.36, n=20) on average at the minimum rainfall intensity and 142.27mm/hr (sd=1.02~3.25, n=20) on average at the maximum rainfall intensity. In artificial rainfall recreation experiments repeated for three times, the most frequent quartile was found to be the third quartile, which is around 40 minutes after beginning the experiment. The peak flow was observed 70 minutes after beginning the experiment in the experiment zone and after 50 minutes in the control zone. While the control zone recorded the maximum runoff intensity of 2.26mm/min(sd=0.25) 50 minutes after beginning the experiment, the experiment zone recorded the maximum runoff intensity of 0.77mm/min (sd=0.15) 70 minutes after beginning the experiment, which is 20 minutes later than the control zone. Also, the maximum runoff intensity of the experiment zone was 79.6% lower than that of the control zone, which confirmed that vegetation unit-type LID system had rainfall runoff reduction and delay effects. Based on the above findings, the reliability of a lab-level rainfall simulator for monitoring the vegetation-based LID system was reviewed, and maximum runoff intensity reduction and runoff time delay were confirmed. As a result, the study presented a performance evaluation method that can be applied to the pre-design of the vegetation-based LID system for rainfall events on a location before construction.

• 콘크리트학회논문집
• /
• 제22권3호
• /
• pp.297-303
• /
• 2010

현재 개발된 콘크리트 충전 대골형 파형 강판은 아치형 플레이트의 구조로서 그 특징은 구조물이 아치의 형상을 가지므로 모멘트가 작게 발생하는 압축력 지배구조의 구조적 특성을 가지게 되며 이에 따라 강재를 덧대 준공된 공간을 압축력에 유리한 콘크리트를 충전 강재 콘크리트 합성단면을 형성하여 압축력에 대한 강도 발현증대를 목적으로 한다. 이 연구에서는 새로운 개념의 콘크리트 충전 대골형 파형강판(브릿지 플레이트) 부재의 압축 및 휨 시험을 실시하여 평가된 압축력과 콘크리트 충전 브릿지 플레이트 구조물의 설계방법인 캐나다 도로교설계기준(CHBDC)의 방법으로 설계압축력을 산정하여 비교 검토함으로서 새로운 개념의 콘크리트 충전 브릿지 플레이트 부재의 안전율을 평가하였다. 설계압축력과 성능평가 시험을 통하여 얻어진 축력을 비교하여 안전율을 검토한 결과 적정 안전율 2.0이상 과도하게 나타나 CHCBD을 이용한 설계가 매우 보수적으로 평가되고 있으며, 이 연구 결과를 바탕으로 안전율을 설계에 반영한다면, 단면축소 및 시공비용 절감에 따른 경제적인 시공이 가능할 것으로 판단된다.

• 한국건설관리학회논문집
• /
• 제17권2호
• /
• pp.110-117
• /
• 2016

군사시설은 특성상 지역발전에 상당한 제한을 가져왔으며, 심지어 지자체와의 빈번한 갈등 및 법적 분쟁을 유발하는 경우도 있었다. 이에 군사시설과 민군관계에 관한 대부분 연구는 상생발전보다는 갈등해결에 관한 내용이 주를 이루었으며, 그 해결책으로 대부분 이전방안이 제시되었다. 이 연구에서는 지속가능형 군사시설 발전모델 구축을 위하여 민군관계를 상생의 관계로 설정하여 그 해법을 모색하고자 하였다. 우선 민군의 접점을 찾고, 해결방안 모색을 위하여 델파이기법과 짝비교법을 통해 지역주민 지자체 군 관계자간의 의견을 수렴하였다. 수렴된 의견을 토대로 민 군의 전문가들이 발전방향을 모색하였다. 사례연구로 제시된 민군협력사업을 통해 ${\bigcirc}{\bigcirc}{\bigcirc}{\bigcirc}$ 학교는 국방예산 절감, 노후시설 개선 및 체육시설 확충, 대군이미지 향상 등을, ${\bigcirc}{\bigcirc}$ 구청은 지역주민 복지수준 향상을 위한 동호회 체육시설 확보라는 단기적인 성과를 얻을 수 있었으며, 민 관 군 협의체 구축을 통한 우호관계증진 등의 장기적인 성과도 기대할 수 있을 것이다.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.479-486
• /
• 2017

주름웨브는 강구조물에서 세장해진 웨브의 대안으로 널리 사용되고 있으나 주름진 웨브와 플랜지 사이의 용접은 제작비용의 상승이라는 문제점을 안고 있다. 이러한 경제적인 문제점을 해결하기 위해, 엠보싱웨브를 가지는 보(이하, 엠보싱웨브 보)를 개발하게 되었다. 엠보싱웨브는 냉간프레스 가공에 의하여 형성되고, 웨브와 플랜지는 기계화자동용접에 의하여 접합된다. 엠보싱웨브 보의 구조적 성능을 확인하기 위해, 동일한 크기의 일반 H-형강 실험체도 제작되었고 가력실험이 수행되었다. 실험에 의하여 엠보싱웨브 보 실험체는 H-형강 실험체에 비하여 강도면에서 약 40%정도의 높은 성능을 보였다. 엠보싱웨브 보와 주름웨브 보의 형상은 다르지만, Eurocodes의 주름웨브보 설계식을 이용하여 엠보싱웨브 보의 내력을 예측한 결과 실험결과값과는 상이한 결과를 보였다. 따라서 기존 Eurocodes를 엠보싱웨브보에 적용하는 것은 무리가 있으므로 엠보싱웨브 보의 현장사용을 위해서는 적절한 설계식이 제안되어야 할 것으로 판단한다.

• 지적과 국토정보
• /
• 제47권1호
• /
• pp.111-126
• /
• 2017

소형 무인항공시스템(무인항공기 플랫펌과 센서의 융합기술, 'sUAS')은 정확성, 경제성 및 운용면의 무궁한 잠재성으로 여러 건설현장에서 새로운 응용이 창출되면서 활용이 점차 확산되고 있다. 본 연구의 목적은 소형 UAS에 의한 토공량 산정의 타당성을 검토하는 것이다. 이를 위해 시흥시 소재 배곧생명공원 내 위치한 대략 $270m{\times}300m{\times}20m$ 규모의 원추형 성토부를 대상으로 소형무인항공기를 활용하여 영상을 취득한 후, UAS 영상해석을 통해 산출된 토공량을 GNSS Network-RTK 지상측량에 의한 토공량과 정량적으로 비교분석하였다. 연구결과, 무인항공시스템 자료와 GNSS Network RTK 자료에 의한 토공량의 편차가 2% 이하였고 특히, 작업의 편이성, 신속성 및 경제성 면에서 소형 UAS 영상기반 토공량 산정의 효용성을 입증할 수 있었다. 따라서, 식생높이의 산정방안이 보완된다면 중 소규모 현장의 토공량 산정은 물론 3차원 지형공간정보 생성 분야에 무인항공영상의 응용이 유용할 것으로 기대된다.