• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.497-510
• /
• 2017

A framed structure may be composed of two sub-structures, which are linked by a hinged joint. One sub-structure is the primary system and the other is the secondary system. The primary system, which is subjected to the periodic external load, can give rise to an auto-parametric resonance of the second system. Considering the geometric-stiffness effect produced by the axially internal force, the element equation of motion is derived by the extended Hamilton's principle. The element equations are then assembled into the global non-homogeneous Mathieu-Hill equations. The Newmark's method is introduced to solve the time-history responses of the non-homogeneous Mathieu-Hill equations. The energy-growth exponent/coefficient (EGE/EGC) and a finite-time Lyapunov exponent (FLE) are proposed for determining the auto-parametric instability boundaries of the structural system. The auto-parametric instabilities are numerically analyzed for the two frames. The influence of relative stiffness between the primary and secondary systems on the auto-parametric instability boundaries is investigated. A phenomenon of the "auto-parametric internal resonance" (the auto-parametric resonance of the second system induced by a normal resonance of the primary system) is predicted through the two numerical examples. The risk of auto-parametric internal resonance is emphasized. An auto-parametric resonance experiment of a ${\Gamma}$-shaped frame is conducted for verifying the theoretical predictions and present calculation method.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.49-61
• /
• 2000

Magnitude-frequency relationships are used in the design of dams, highway bridges, culverts, water supply systems, and flood control structures. In this paper, possible techniques for analyzing flood frequency at a site are presented. A currently used approach to flood frequency analysis is based on the concept of parametric statistical inference. In this analysis, the assumption is make that the distribution function describing flood data in known. However, such an assumption is not always justified. Even though many people have shown that the nonparametric method provides a better fit to the data than the parometric method and gives more reliable flood estimates. the noparpmetric method implies a small probability in extrapolation beyond the highest observed data in the sample. Therefore, a remedy is presented in this paper by introducing an estimator which mixes parametric and nonparametric density estimate.

• Structural Engineering and Mechanics
• /
• 제13권6호
• /
• pp.653-670
• /
• 2002

In order to ensure the structural dynamic stability of moving liquid-storage containers, the flow motion of interior liquid should be appropriately suppressed by means of mechanical devices such as the disc-type elastic baffle. In practice, the design of a suitable baffle requires a priori the parametric dynamic characteristics of storage containers, with respect to the design parameters of baffle, such as the installation location and inner-hole size, the baffle number, and so on. In this paper, we intend to investigate the parametric effect of the baffle parameters on the transient dynamic behavior of a cylindrical fuel-storage tank in an abrupt vertical acceleration motion. For this goal, we employ the ALE (arbitrary Lagrangian-Eulerian) kinematic description method incorporated with the finite element method.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.259-263
• /
• 2007

The choice of input distribution in quantitative risk assessments modeling is of great importance to get unbiased overall estimates, although it is difficult to characterize them in situations where data available are too sparse or small. The present study is particularly concerned with accommodation of uncertainties commonly encountered in the practice of modeling. The authors applied parametric and non-parametric bootstrap simulation methods which consist of re-sampling with replacement, in together with the classical Student-t statistics based on the normal distribution. The implications of these methods were demonstrated through an empirical analysis of trade volume from the amount of chicken and pork meat imported to Korea during the period of 1998-2005. The results of bootstrap method were comparable to the classical techniques, indicating that bootstrap can be an alternative approach in a specific context of trade volume. We also illustrated on what extent the bias corrected and accelerated non-parametric bootstrap method produces different estimate of interest, as compared by non-parametric bootstrap method.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.594-600
• /
• 2010

In this paper, we introduced non-parametric statisticals method that could analyse the field data and proposed application ways such as repair-part demand forcasting, MTBF estimation and trend analysis, identity comparison with two populations using the analytical results. In addition, we applied that to real field data which has been collected for about ten years from K series tracked vehicle. After that, we compared the results with those using traditional parametric statistical method, and verified the usability of them.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.417-424
• /
• 2010

변단면을 갖는 FCM(Free Cantilever Method) 교량의 초기 설계단계에서 설계변경에 따른 반복적 작업에 대한 효율성 향상을 위하여 박스거더의 종방향 형상을 자동조정할 수 있도록 하는 파라메트릭 모델링 방법을 연구하였다. FCM 교량의 종방향 형상을 표현하기 위한 매개변수를 정의하였으며, 기존 FCM 교량의 설계 시 적용된 매개변수의 통계치 적용을 통해 매개변수들 간의 내재적, 외재적 구속조건 및 함수관계를 정의하였다. 정의한 구속조건 및 관계를 적용한 파라메트릭 모델링 구현을 통해 그 적용 가능성을 검증하였으며, 기존 설계된 교량을 대상으로 파라메트릭 모델링을 수행한 결과로 생성된 3차원 교량 모델의 콘크리트 물량과 대상교량의 설계문서 상의 물량 비교를 통해 모델의 정확성을 확인하였다.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.136-148
• /
• 1995

In this study, a model integration method is pressented as a new method for development of a parametric simulation model. This method enable us to integrate the special simulation models for each production subsystem into a large simulation model. Not only this large simulation model but also each special simulation model for each production subsytem can be used independently. Using this integration method man can reduce the development time and cost for simulation model development. To show the usefulness of this method, a simulation model for a production system with robots is developed by this model integration method. This simulation model is realized by the integration of two special simulation models, one model for a machining subsystem and the other model for a transport subsystem. The modeled production system consists of the robotic cells for machining and a transport subsystem which enable the material flow among the robotic cells. The flow of workpiece in each robotic cell is not fixed. All machines in a robotic cell are only served by robots.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.573-574
• /
• 2008

• 품질경영학회지
• /
• 제32권4호
• /
• pp.242-251
• /
• 2004

Several statistical methods are introduced 1=o analyze the accelerated failure time data. Most frequently used method is the log-linear approach with parametric assumption. Since the accelerated failure time experiments are exposed to many environmental restrictions, parametric log-linear relationship might not be working properly to analyze the resulting data. The models proposed by Buckley and James(1979) and Stute(1993) could be useful in the situation where parametric log-linear method could not be applicable. Those methods are introduced in accelerated experimental situation under the thermal acceleration and discussed through an illustrated example.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.254-262
• /
• 2001

It is not possible to exchange parametric information of CAD (Computer Aided Design) models based on the current version of STEP (Standard leer the Exchange of Product model data). The design intent can be lost during the STEP transfer of CAD models. The ISO Parametrics Group has proposed the SMCH (Solid Model Construction History) schema in June 2000 that includes structures fur exchange of parametric information. This paper proposes the macro parametric approach that is intended to provide capabilities to transfer parametric information. In this approach, CAD models are exchanged in the form of macro files. The macro file contains user commands which are used in the modeling phase. To exchange CAD models using the macro parametric approach, modeling commands of commercial CAD systems are analyzed. Those commands are classified by the grouping method suggested by Bill Anderson. As a neutral file format, a standard modeling commands set has been defined. Mapping relations between the standard modeling commands set and the native modeling commands set of commercial CAD systems are defined.