• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.703-709
• /
• 2017

Creep analysis takes much more time than elastic or elastic-plastic analysis. In this study, we conducted elastic and elastic-plastic analysis and compared the results with creep analysis results. In the elastic analysis, we used primary stress, which can be classified by the $M{\alpha}-tangent$ method and stress intensities recommended in the ASME code. In the elastic-plastic analysis, we calculated the parameters recommended in the R5 code. For the FE models, a bending load, uniaxial load, and biaxial load were applied to the cross shaped welded plate, and a bending load and internal pressure were applied to the elbow pipe. To investigate the element size sensitivity, we conducted FE analysis for various element sizes for the cases where bending load was applied to the cross shaped welded plate. There was no significant difference between the creep stress and the alternative methods; however, in the $M{\alpha}-tangent$ method, the results were affected by the element size.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.963-966
• /
• 2005

Model updating method is known to the area to correct finite element models by the results of the experimental modal analysis. Most common methods in model updating depend on a parametric model of the structure. In this case, the number of parameters is normally smaller than that of modal data obtained from an experiment. In order to overcome this limitation, many researchers are trying to get modal data as many as possible to date. 1 want to name this method multiple modified-system generation method. These Methods consist of direct system modification method and feedback controller method. The direct system modification Is to add a mass or stiffness on the original structure or perturb the boundary conditions. The feedback controller method is to make the closed food system with sensor and actuator so as to get the closed loop modal data. In this paper, we need to focus on the feedback controller method because of its simplicity. Several methods related the feedback controller methods are virtual passive controller (VPC) sensitivity enhancement controller (SEC) and mode decoupling controller (MDC). Among them, we will apply MDC to the model updating problem. MDC has various advantages compared with other controllers, such as VPC and SEC. To begin with, only the target mode can be changed without changing modal property of non-target modes. In addition, it is possible to fix any modes if the number of sensors is equal to that of the system modes. Finally, the required control power to achieve desired change of target mode is always lower than those of other methods such as VPC. However, MDC can make the closed loop system unstable when using incomplete modal data. So we need to take action to avoid undesirable instability from incomplete modal data. In this paper, we address the method to design the unique and robust MDD obtained from incomplete modal data. The associated simulation will be Incorporated to demonstrate the usefulness of this method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.445-454
• /
• 1998

In order to establish a technical concept for the detection of defects in weldments in thin steel plate, an experimental and theoretical investigation was carried out for artificial defects in a steel plate having a thickness of 2.4mm by using the guided wave technique. In particular the goal was to find the most effective testing parameters paying attention to the relationship between the excitation frequency by a tone burst system and various incident angles. It was found that the test conditions that worked best was for a frequency of 840kHz and an incident angle of 30 or 85 degrees, most of the defects were detected with these conditions. Also, it was clear that a guided wave mode generated under an incident angle of 30 degrees was a symmetric mode, So, and that of 85 degrees corresponded to an antisymmetric mode, Ao. By using the two modes, most of all of the defects could be detected. Furthermore, it was shown that the antisymmetric mode was more sensitive to defects near the surface than the symmetric mode. Theoretical predictions confirmed this sensitivity improvement with Ao for surface defects because of wave structure variation and energy concentration near the surface.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1998

In the dynamic soil-structure interaction(SSI) analysis, numerous uncertain parameters are involved. They include the uncertainties in the definition of input motions, modeling of soil-structure interaction systems. analysis techniques, etc. This paper presents the results of parametric studies of the seismic responses of a reactor containment structure built on the viscoelastic layered soil. Among the numerous parameter, this study concentrates on the effects of definition point of the input motion, embedment of structure to the base soil, thickness of the top soil layer, and rigidity of the base soil. The substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of th SSI system computed from the ratio of dissipated energy to the strain energy for each model. From the study results, the sensitivity of each parameter on the earthquake responses has been suggested for the practical application of the substructure method of SSI analysis.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.941-954
• /
• 2011

In this study, past method and recent method for flood discharge with domestic multi-purpose dams in Korea were compared and analyzed with respect to the scale of watershed. Rainfall depth, temporal pattern, rainfall excess, rainfall-runoff model, parameter estimation and base flow were selected as the principal factors affecting flood discharge and effects on flood discharge were analyzed quantitatively by using sensitivity analysis. The results showed that the flood discharges calculated by past and recent method increased and decreased with a wide range of discharge with respect to the scale of watershed. The reason for decrease of flood discharge is the exchange of temporal pattern of rainfall and the principal reasons for increase of flood discharge are the increase of rainfall depth by unusual weather phenomena and the difference of estimation method for parameters of unit hydrograph.

• Health Policy and Management
• /
• v.29 no.3
• /
• pp.357-367
• /
• 2019

Background: This study evaluated the cost-effectiveness of 21 different national dyslipidemia screening strategies according to total cholesterol (TC) cutoff and screening interval among 40 years or more for the primary prevention of coronary heart disease over a lifetime in Korea, from a societal perspective. Methods: A decision tree was used to estimate disease detection with the 21 different screening strategies, while a Markov model was used to model disease progression until death, quality-adjusted life years (QALYs) and costs from a Korea societal perspective. Results: The results showed that the strategy with TC 200 mg/dL and 4-year interval cost \4,625,446 for 16.65105 QALYs per person and strategy with TC 200 mg/dL and 3-year interval cost \4,691,771 for 16.65164 QALYs compared with \3,061,371 for 16.59877 QALYs for strategy with no screening. The incremental cost-effectiveness ratio of strategy with TC 200 mg/dL and 4-year interval versus strategy with no screening was \29,916,271/QALY. At a Korea willingness-to-pay threshold of \30,500,000/QALY, strategy with TC 200 mg/dL and 4-year interval is cost-effective compared with strategy with no screening. Sensitivity analyses showed that results were robust to reasonable variations in model parameters. Conclusion: In this study, revised national dyslipidemia screening strategy with TC 200 mg/dL and 4-year interval could be a cost-effective option. A better understanding of the Korean dyslipidemia population may be necessary to aid in future efforts to improve dyslipidemia diagnosis and management.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.155-155
• /
• 2019

The Agricultural Policy/Environmental eXtender (APEX) models have been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. National Academy of Agricultural Sciences, Wanju, Korea, has modified a key component of APEX application, named APEX-Paddy for simulating water quality with considering appropriate paddy management practices, such as puddling and flood irrigation management. Calibration and validation are an anticipated step before any model application. Simple techniques are essential to assess whether or not a parameter should be adjusted for calibration. However, very few study has been done to evaluate the ability of APEX-Paddy to simulate the impact of multiple management scenarios on nutrients loss. In this study, the observation data from experimental fields at Iksan in South Kora was used in calibration and evaluation process during 2013-2015. The APEX auto- calibration tool (APEX-CUTE) was used for model calibration and sensitivity analysis. Four quantitative statistics, the coefficient of determination ($R^2$),Nash-Sutcliffe(NSE),percentbias(PBIAS)androotmeansquareerror(RMSE)were used in model evaluation. In this study, the hydrological process of the modified model, APEX-Paddy, is being calibrated and tested in predicting runoff discharge rate and nutrient yield. Field-scale calibration and validation processes are described with an emphasis on essential calibration parameters and direction regarding logical sequences of calibration steps. This study helps to understand the calibration and validation way is further provided for applications of APEX-Paddy at the field scales.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.469-469
• /
• 2016

본 연구에서는 지진해일 모의결과를 바탕으로 하여 지진해일모형 결과에 민감하게 작용할 수 있는 다양한 입력조건을 분석하였다. 우선 2004년 인도양 지진해일 모의를 위하여 다중격자체계를 갖추고 있는 COMCOT모형과 수심적분된 Boussinesq모형의 결합모형을 사용하였으며, 근해역에 지진해일 충격 및 피해산정 결과에 유효한 영향을 주는 입력인자를 파악하기 위하여 4가지의 시나리오를 설정하였다. 각 시나리오에서는 3개의 서로 다른 독립인자가 포함되었으며 이들은 배타적으로 결정되어 최소한의 시나리오로 다양한 분석이 가능하도록 하였다. 즉, 시나리오 1에서는 지진해일의 초기수면상태를 산정하기 위한 간략화된 단층모형을 적용하였고, 이 때 바닥마찰에 대한 고려는 배제되었다. 시나리오 2에서는 시나리오 1과 모든 조건은 동일하게 하였으나 유한단층 모형을 통해 초기수면상태를 산정하도록 하였다. 이처럼 유사하게 시나리오 3에서는 복잡한 지형 특성을 나타내는 몰디브 지역의 보다 정확한 해석을 위하여 몰디브 지역의 상세격자망을 추가적으로 다중격자체계에 포함시켰다. 마지막으로 바닥마찰항에 대한 민감도를 분석하기 위하여 시나리오 4에서는 바닥마찰항에 대한 고려를 포함시켰다. 또한, 4가지 시나리오 외에 결합모형의 성능을 평가하기 위하여, COMCOT모형만을 사용하는 시나리오를 추가적으로 설정하였다. 즉, 시나리오 1과 모든 조건은 동일하되 COMCOT모형만을 사용하도록 하였다. 설정된 조건에 따른 수치모의 결과, 지진해일 내습에 따른 해수위 변화는 각 시나리오별로 큰 차이를 보이지 않았으나, Boussinesq모형에 의한 지진해일의 동수역학적 거동은 COMCOT모형을 사용한 결과와 유의한 차이를 보였으며, 특히 파랑에 기인한 난류적 거동은 극명한 대조를 이루었다. 따라서, 본 연구결과를 통해 향후 파랑에 기인한 난류적 거동의 정확모의를 위해 수치해석에 따른 확산오차 및 바닥마찰항에 대한 면밀한 연구가 필요함을 시사하였다.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.109-116
• /
• 2015

This paper is concerned with the single vendor single buyer integrated production inventory problem. To make this problem more practical, space restriction and lead time proportional to lot size are considered. Since the space for the inventory is limited in most practical inventory system, the space restriction for the inventory of a vendor and a buyer is considered. As product's quantity to be manufactured by the vendor is increased, the lead time for the order is usually increased. Therefore, lead time for the product is proportional to the order quantity by the buyer. Demand is assumed to be stochastic and the continuous review inventory policy is used by the buyer. If the buyer places an order, then the vendor will start to manufacture products and the products will be transferred to the buyer with equal shipments many times. The mathematical formulation with space restriction for the inventory of a vendor and a buyer is suggested in this paper. This problem is constrained nonlinear integer programming problem. Order quantity, reorder points for the buyer, and the number of shipments are required to be determined. A Lagrangian relaxation approach, a popular solution method for constrained problem, is developed to find lower bound of this problem. Since a Lagrangian relaxation approach cannot guarantee the feasible solution, the solution method based on the Lagrangian relaxation approach is proposed to provide with a good feasible solution. Total costs by the proposed method are pretty close to those by the Lagrangian relaxation approach. Sensitivity analysis for space restriction for the vendor and the buyer is done to figure out the relationships between parameters.