• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.89-96
• /
• 2011

A three dimensional ecological model(EMT-3D) was applied to Ulsan Bay for the simulation of Dioxins. The simulated results of dissolved Dioxins were in agreement with the observed values, with a correlation coefficient(R) of 0.7951 and a coefficient of determination($R^2$) of 0.6265. The results of sensitivity analysis showed that partition rate, adsorption rate and bioconcentration factor were important factors. Therefore, the parameters must be carefully considered in the modeling. In the case of 50% and 80% total loads reduction, concentration of dissolved Dioxins was shown to be lower than 0.150 and 0.250 pg WHD-TEQ/L, respectively.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.14-18
• /
• 2004

High levels of ambient noise and safety factors often limit the use of 'active-source' seismic methods for geotechnical investigations in urban environments. As an alternative, shear-wave velocity-depth profiles can be obtained by treating the background microtremor wave field as a stochastic process, rather than adopting the traditional approach of calculating velocity based on ray path geometry from a known source. A recent field test in Melbourne demonstrates the ability of the microtremor method, using only Rayleigh waves, to resolve a velocity inversion resulting from the presence of a hard, 12 m thick basalt flow overlying 25 m of softer alluvial sediments and weathered mudstone. Normally the presence of the weaker underlying sediments would lead to an ambiguous or incorrect interpretation with conventional seismic refraction methods. However, this layer of sediments is resolved by the microtremor method, and its inclusion is required in one-dimensional layered-earth modelling in order to reproduce the Rayleigh-wave coherency spectra computed from observed seismic noise records. Nearby borehole data provided both a guide for interpretation and a confirmation of the usefulness of the passive Rayleigh-wave microtremor method. Sensitivity analyses of resolvable modelling parameters demonstrate that estimates of shear velocities and layer thicknesses are accurate to within approximately $10\%\;to\;20\%$ using the spatial autocorrelation (SPAC) technique. Improved accuracy can be obtained by constraining shear velocities and/or layer thicknesses using independent site knowledge. Although there exists potential for ambiguity due to velocity-thickness equivalence, the microtremor method has significant potential as a site investigation tool in situations where the use of traditional seismic methods is limited.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.87-92
• /
• 2016

In this paper, we improved classification performance of benign and malignant lung nodules by including the parenchyma features. For small pulmonary nodules (4-10mm) nodules, there are a limited number of CT data voxels within the solid tumor, making them difficult to process through traditional CAD(computer aided diagnosis) tools. Increasing feature extraction to include the surrounding parenchyma will increase the CT voxel set for analysis in these very small pulmonary nodule cases and likely improve diagnostic performance while keeping the CAD tool flexible to scanner model and parameters. In AdaBoost learning using naive Bayes and SVM weak classifier, a number of significant features were selected from 304 features. The results from the COPDGene test yielded an accuracy, sensitivity and specificity of 100%. Therefore proposed method can be used for the computer aided diagnosis effectively.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.223-231
• /
• 2005

A quantitative risk assessment tool was used to provide estimates of the probability that foot-and-mouth (FMD) virus-contaminated, smuggled animal products are fed to susceptible swine in Korea. Sensitivity analyses were conducted to attempt to distinguish between parameter uncertainty and variability, using different assumptions on the effect of cooking at home, the effect of the fresh meat, and the effect of heat treatment at garbage processing facility. The median risk estimate was about 20.1% with a mean value of 27.4%. In a scenario regarding all beef and pork were considered as fresh meat the estimated median risk was 3.4%. The risk was greatly dependent on the survival parameters of the FMD virus during the cooking or heat treatment at garbage processing facility. Uncertainty about the proportion of garbage that is likely contaminated with FMD had a major positive influence on the risk, whereas conversion rate representing the size of a load had a major negative effect. This model was very useful in assessing the risk explored. However, the model also requires enhancements, such as the availability of more accurate data to verify the various assumptions considered such as FMD prevalence in a specific country, proportion of garbage which is recycled as feed, proportion of food discarded as garbage. Other factors including the effect of selection of animals for slaughter, ante- and post-mortem inspection, the domestic distribution of the smuggled products, and susceptible animals other than pigs, are need to be taken into account in the future model development.

• Journal of Microbiology
• /
• v.44 no.3
• /
• pp.363-368
• /
• 2006

In this study, native Byadyrhizobium strains were isolated from the host plant, Glycine max, harvested from fields in Madhya Pradesh, India, and were typed by Iytic rhizobiophages. Eight indigenous (Soy2, ASR011, ASR031, ASR032, MSR091, ISR050, ISR076 and ISR078) and two exotic strains (USDA123 and CB1809), all of which evidenced a distinct reaction with six phages, were employed in this study. The symbiotic interaction of these strains was studied initially using soybean cultivar JS335 in a sand culture in a controlled environment, and the efficiency was assessed based on the nodule number, nodule dry weight, plant dry weight, nitrogenase activity, and total accumulation of N per plant. Symbiotic effectiveness was found to be highest with the native phage-sensitive isolate ASR011, whereas it was at a minimum with the phage-resistant isolates, ISR050 and ISR078. Additionally, the effectiveness of these strains was evaluated using six soybean cultivars belonging to different maturity groups; namely, Brags, Lee, Pusa20, PK416, JS33S and NRC37. Analysis of variance data evidenced significant differences due to both symbionts, for the majority of the tested parameters. The CB1809, USDA123, and ASR011 strains evidenced relatively superior symbiotic effectiveness with soybean cultivars Brags, Lee and JS335. Strain ISR078 evidenced no significant responses with any of the cultivars. The ASR031 strain performed moderately well with all tested cultivars. The symbiotic response of all the strains was quite poor with cultivar PK416. Our studies showed that a significant relationship existed between the phage sensitivity and symbiotic efficiency of the bacterial strains with the host-cultivars.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.145-150
• /
• 2000

The adaptation for a right source on the retina consists of the light-dark adaptation's two curves for a time by the rod-cone receptor. We obtained the adaptation for a time to measure the threshold intensities, it was two decay curves by the center of a rod-cone break. It could be represented the dark adaptation by a exponential decay function consisting of $T_{min}$, $a_r$, $a_c$, $T_{0(r)}$, $T_{0(c)}$, $t_b$, $t_c$'s parameters. The curves of a $t_b$ below and a $t_b$ above showed the adaptation sensitivity of the cone and the rod. The exponential decay function was well applied to the dark adaptation in difference retinal positions, in contrally fixated fields, in luminous, as age etc. It could be used the decay parameter as the index because of representing the properties of the dark adaptation's function.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.372-375
• /
• 2004

The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.303-314
• /
• 2017

With increased human activity in space, the risk of re-entry and collision between space objects is constantly increasing. Hence, the need for space situational awareness (SSA) programs has been acknowledged by many experienced space agencies. Optical and radar sensors, which enable the surveillance and tracking of space objects, are the most important technical components of SSA systems. In particular, combinations of radar systems and optical sensor networks play an outstanding role in SSA programs. At present, Korea operates the optical wide field patrol network (OWL-Net), the only optical system for tracking space objects. However, due to their dependence on weather conditions and observation time, it is not reasonable to use optical systems alone for SSA initiatives, as they have limited operational availability. Therefore, the strategies for developing radar systems should be considered for an efficient SSA system using currently available technology. The purpose of this paper is to analyze the performance of a radar system in detecting and tracking space objects. With the radar system investigated, the minimum sensitivity is defined as detection of a $1-m^2$ radar cross section (RCS) at an altitude of 2,000 km, with operating frequencies in the L, S, C, X or Ku-band. The results of power budget analysis showed that the maximum detection range of 2,000 km, which includes the low earth orbit (LEO) environment, can be achieved with a transmission power of 900 kW, transmit and receive antenna gains of 40 dB and 43 dB, respectively, a pulse width of 2 ms, and a signal processing gain of 13.3 dB, at a frequency of 1.3 GHz. We defined the key parameters of the radar following a performance analysis of the system. This research can thus provide guidelines for the conceptual design of radar systems for national SSA initiatives.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.6
• /
• pp.754-762
• /
• 2012

Colbricon Superiore and Inferiore are two small adjacent high-mountain lakes located in the Paneveggio Natural Park (Italy) that offer the rare opportunity to study two iso-ecologic water environments differing only by area and volume in a ratio of 2:1 and 3:1, respectively. We took advantage of this setting to investigate phytoplankton dynamics, compare variability and productivity differences between the two basins, and assess size-dependent issues. The phytoplankton group of the Dinophyceae was chosen as the indicator organisms of ecological perturbation owing to their high sensitivity to environmental variations, as well as their acknowledged nature of versatile proxy to report global climatic changes. The study was conducted for over 10 years with fortnightly samplings. Results indicated that (a) the Dinophyceae communities in the smaller lake were significantly more resistant to changes exerted by the fluctuation of lakewater transparency and pH; and (b) the smaller lake sustained a consistently higher production with an average Dinophyceae density 1.73 fold higher than that of the larger lake. The coefficients of variation show that the chemical parameters in the smaller lake display higher time-related fluctuation while being spatially homogeneous and that such conditions correlate with a higher stability of the Dinophyceae assemblage. The use of this setting is also proposed as a model to test relationships between ecosystem production and physical stability.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.83-93
• /
• 2020

Bivariate measure of risk and error(BMORE) plot is originally designed to depict bivariate output data and related statistics obtained from a stochastic simulation such as sample mean, median, outliers, and a boundary of a certain percentile of simulation data. When compared to the static numbers, the plot has a big advantage in visualization that enables scholars and practitioners to understand the potential variability and risk in the simulation data. In this study, beyond just the construction of the plot to depict the variability of a certain system, we add a chance constraint to the plot and apply it for decision making such as checking the feasibility of systems, comparing performances of the systems on statistical background, and also analyzing the sensitivity of the problem parameters. In order to demonstrate an application of the plot, we employ an inventory management problem as an example. However, the techniques and algorithms suggested in this paper can be applied to any other problems comparing systems on bivariate performance measures with simulation/experiment results.