• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1183-1189
• /
• 1999

This paper presents the method of parameter estimation of diffusion model for monitoring Demand-Side Management program. Bass diffusion model was applied in this paper, which has different values according to the following parameters; coefficients of innovation, imitation and potential adopters. Though it is very important to estimate three parameters precisely, there has been no empirical way in practice. Thus, this paper presents the method of parameter estimation in case of few data with constraints to reduce the possibility of bad estimation. The constraints can be empirical results or expert's decision. Case studies show the diffusion curves and forecasted values of the peak for the high-efficient lighting. The feedback and nonlinear least-square parameter estimation methods used in this paper enable us to evaluate the status and to predict the effect of DSM program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1073-1075
• /
• 1998

This paper presents the method of parameter estimation of diffusion model for monitoring Demand-Side Management Program. Bass diffusion model was applied in this paper, which has different values according to parameters ; coefficients of innovation, imitation and potential adopters. Though it is very important to estimate three parameter, there are no empirical results in practice. Thus, this paper presents the method of parameter estimation in case of few data with constraints to reduce the possibility of bad estimation. The constraints are empirical results or expert's decision. Case studies show the diffusion curves of high-efficient lighting and also forecasting of the peak value for power demand considering diffusion of high-efficient lighting, the feedback and least-square parameter estimation method used in this paper enable us to evaluate the status and forecasting of the effect of DSM program.

• 응용통계연구
• /
• 제33권4호
• /
• pp.467-482
• /
• 2020

본 논문은 이분산성을 갖는 위치-척도 시계열 모형에서 모수의 변화에 대한 모니터링 절차를 연구한다. 모니터링 절차에서 수정된 잔차의 누적합을 이용한 탐지기를 소개하고 귀무가설과 대립가설 하에서 각각 모니터링 절차에 대한 점근적 성질을 규명한다. 그리고 모의실험과 사례 분석을 통하여 제안한 모니터링 방법의 성능이 우수함을 확인한다.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.69-74
• /
• 1998

In order to monitor the tool wear in milling operation, cutting force is measured as the tool wear increased. The digital signal processing methods are used to detect the tool wear . As AR parameter extract the feature of tool wear , it can be used as input parameter of pattern classifier. The FFT monitor the tool wear exactly , but it can not do real time signal processing. The band energy method can be used to real time monitoring of tool wear ,but int can degrade the exact monitoring.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.53-58
• /
• 2009

The emergency diesel generator(EDG) of the nuclear power plant is designed to supply the power to the nuclear reactor on Station Black Out(SBO) condition. The operation reliability of onsite emergency diesel generator should be ensured by a conditioning monitoring system designed to monitor and analysis the condition of diesel generator. For this purpose, we have developing the technologies of condition monitoring for the wolsong unit 3&4 standby diesel generator including diesel engine performance. In this paper, technologies of condition monitoring for the wolsong standby diesel generator are described about three step. First is for selection of operating parameter for monitoring. Second is for technologies of online condition monitoring, Third is for monitoring of engine performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 2003

This paper presents an approach to estimate the power transmission line parameter by phasor measurement units(PMUs), which are synchronized to 1 pps signal of GPS. Existing approaches to estimate power transmission line parameter, are mainly off-line ones, based on faults or switching events on other neighboring lines. In this paper, to obtain static and dynamic properties of power transmission line parameter in service, the prototype of pmu-based Transmission Line Parameter Monitoring System (TLPMS) is proposed. Also, an technique to estimate parameters of transmission line described as 2-port network model and the soundness of estimated parameters are addressed.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.285-290
• /
• 2002

Integrated condition monitoring is required to monitor effectively the machine conditions since machine failures could not be monitored accurately by any single measurement parameter. Application of various condition monitoring techniques is therefore preferred in many cases in order to diagnosis the machine condition. However it inevitably requires lots of maintenance cost and sometimes it could be proved to over-maintenance unnecessarily. This could happen especially when one measurement parameter closely correlates to another. Therefore correlation analysis of various monitoring parameters has to be performed to improve the reliability of diagnosis. In this work, Pearson correlation coefficient was used to analyze the correlation between condition monitoring parameters of an over-loaded machine system where the vibration, wear and temperature were monitored simultaneously. The result showed that Pearson correlation coefficient could be regarded as a good measure for evaluating the availability of condition monitoring technology.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.252-259
• /
• 2001

Integrated condition monitoring is required to monitor effectively the machine conditions since machine failures could not be monitored accurately by any single measurement parameter. Application of various condition monitoring techniques is therefore preferred in many cases in order to diagnosis the machine condition. However it inevitably requires lots of maintenance cost and sometimes it could be proved to over-maintenance unnecessarily. This could happen especially when one measurement parameter closely correlates to another. Therefore correlation analysis of various monitoring parameters has to be performed to improve the reliability of diagnosis. In this work, Pearson correlation coefficient was used to analyze the correlation between condition monitoring parameters of an over-loaded machine system where the vibration, wear and temperature were monitored simultaneously. The result showed that Pearson correlation coefficient could be regarded as a good measure for evaluating the availability of condition monitoring technology.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.585-590
• /
• 2014

Recently, monitoring systems, such as POP, take a core role in scheduling or planning of manufacturing facilities for production, maintenance, and so on. Such monitoring systems require functionalities for real-time parameter monitoring and controlling to maximize efficiency of facilities. However, vendors usually do not provide internal communication protocols or interface to access the machine controller. Therefore, the values of parameters related to machine operations and controls cannot be easily accessed from external devices. In this paper, we propose an interface methodology for a real-time monitoring and controlling of injection molding machine parameters such as user input parameters, embedded sensor data and injection molding status information.

• Communications for Statistical Applications and Methods
• /
• 제31권1호
• /
• pp.129-142
• /
• 2024

In various industries, especially manufacturing and chemical industries, it is often observed that the distribution of a specific process, initially having followed a normal distribution, becomes skewed as a result of unexpected causes. That is, a process deviates from a normal distribution and becomes a skewed distribution. The skew-normal (SN) distribution is one of the most employed models to characterize such processes. The shape of this distribution is determined by the asymmetry parameter. When this parameter is set to zero, the distribution is equal to the normal distribution. Moreover, when there is a shift in the asymmetry parameter, the mean and variance of a SN distribution shift accordingly. In this paper, we propose procedures for monitoring the asymmetry parameter, based on the statistic derived from the noncentral t-distribution. After applying the statistic to Shewhart and the exponentially weighted moving average (EWMA) charts, we evaluate the performance of the proposed procedures and compare it with previously studied procedures based on other skewness statistics.