• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.509-521
• /
• 2011

The purpose of this study is to estimate overall reliability and applicability of the watershed modeling for systematic management of point and non-point sources via water quality analysis and prediction of runoff discharge within watershed. Recently, runoff characteristics and pollutant characteristics have been changing in watershed by anomaly climate and urbanization. In this study, the effects of watershed scale were analyzed in runoff and water quality modeling using HSPF. In case of correlation coefficient, its range was from 0.936 to 0.984 in case A(divided - 2 small watersheds). On the other hand, its range was form 0.840 to 0.899 in case B(united - 1 watershed). In case of Nash-Sutcliffe coefficient, its range was from 0.718 to 0.966 in case A. On the other hand, its range was from 0.441 to 0.683 in case B. As a result, it was judged that case A was more accurate than case B. Therefore, runoff and water quality modeling in minimum watershed scale that was provided data for calibration and verification was judged to be favorable in accuracy. If optimal watershed dividing and parameter optimization using PEST in HSPF with more reliable measured data are carried out, more accurate runoff and water quality modeling will be performed.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.1
• /
• pp.45-50
• /
• 2013

Closed-loop J-T (Joule-Thomson) refrigeration cycle is advantageous compared to common open loop $N_2$ decompression system in terms of nitrogen consumption. In this study, two closed-loop pure $N_2$ J-T refrigeration systems with sub-atmospheric device for cooling High Temperature Superconductor (HTS) power cable are investigated. J-T cooling systems include 2-stage compressor, 2-stage precooling cycle, J-T valve and a cold compressor or an auxiliary vacuum pump at the room temperature. The cold compressor and the vacuum pump are installed after the J-T valve to create sub-atmospheric condition. The temperature of 67 K is possible by lowering the pressure up to 24 kPa at the cold part. The optimized hydrocarbon mixed refrigerant (MR) J-T system is applied for precooling stage. The cold head of precooling MR J-T have the temperature from 120 K to 150 K. The various characteristics of cold compressor are invstigated and applied to design parameter of the cold compressor. The Carnot efficiency of cold compressor system is calculated as 16.7% and that of vacuum pump system as 16.4%. The efficiency difference between the cold compressor system and the vacuum pump system is due to difference of enthalpy change at cryogenic temperature, enthalpy change at room temperature and different work load at the pre-cooling cycle. The efficiency of neon-nitrogen MR J-T system is also presented for comparison with the sub-atmospheric devices. These systems have several pros and cons in comparison to typical MR J-T systems such as vacuum line maintainability, system's COP and etc. In this paper, the detailed design of the subcooled $N_2$ J-T systems are examined and some practical issues of the sub-atmospheric devices are discussed.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.43-51
• /
• 2017

The automatic welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. Automatic welding work in semiconductor or space industry to be carried out in pipe line and butt joint mostly and plasma arc welding(PAW) is actively applied. To get the desired quality welds in automated welding system is challenging, a mathematical model is needed that has complete control over the relevant process parameters in order to obtain the required mechanical properties. However, In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. Therefore, this paper investigates the interaction between the welding parameters and mechanical properties for predicting the weld bead geometry by analyzing the S/N ratio.

• Korean journal of food and cookery science
• /
• v.16 no.5
• /
• pp.394-401
• /
• 2000

To enhance gamsulgi quality, the optimal conditions for persimmon peel powder (PPP) addition were evaluated with PPP content(10, 50), sugar content(5, 25) and water content(10, 50%) by reponse surface methodology (RSM). The statistical significanes of sugar element in gamsulgi preperation did not show. Optimal conditions for the content of PPP and water, predicted for each corresponding sensory parameter of gamsulgi, were 10∼40% and 18∼50% for consistency, 10∼32% and 11∼50% for after swallowing, 24∼50% and 14∼39% for color, 10∼40% and 31∼50% for chewiness, 14∼38% and 22∼47% for moistness, 10∼38% and 22∼50% for texture, and 10∼43% and 18∼50% for overall quality. The overall optimal conditions, which satisfied with all sensory properties of gamsulgi, were 25% for PPP content and 35% for water content.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.952-958
• /
• 1999

This paper presented the application of GAs as a means of finding optimal solutions over a parameter space in the controller design for a fuzzy control system. The performance can involve a weighted combination of various performance characteristics such as rise-time, settling-time, settling-time, overshoot. The results obtained here are compared with those for a traditional design obtained using the root-locus method. In contrast to traditional methods, the GA-based method does not require the usual mathematical processess or mathematical model of the system. In this paper, the Ga-based Fuzzy control system combining Fuzzy control theory with the GA, that is known to be very effective in the optimization problem, will be proposed The effectiveness of the proposed control system will be demonstrated by computer simulations using task tracking position system in stable and unstable linear systems. It is shown that the GA-based controller is better than the traditional controller used It stable and unstable linear systems.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.135-140
• /
• 2012

Interior Permanent Magnet Synchronous motors (IPMSM) with concentrated winding are superior to distributed winding in the power density point of view. But it causes huge amount of eddy current losses on the permanent magnet. This paper presents the optimal permanent magnet V-shape on the rotor of an interior permanent magnet synchronous motor to reduce the core losses and improve the performance. Each eddy current loss on permanent magnet has been investigated in detail by using FEM (Finite Element Method) instead of equivalent magnetic circuit network method in order to consider saturation and non-linear magnetic property. Simulation-based design of experiment is also applied to avoid large number of analyses according to each design parameter and consider expected interactions among parameters. Consequently, the optimal design to reduce the core loss on the permanent magnet while maintaining or improving motor performance is proposed by an optimization algorithm using regression equation derived and lastly, it is verified by FEM.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.9-14
• /
• 2005

In this paper, we consider the synthesis of non-fragile $H_{\infty}$ state feedback controllers for singular systems and static state feedback controller with multiplicative uncertainty. The sufficient condition of controller existence, the design method of non-fragile $H_{\infty}$ controller, and the measure of non-fragility in controller are presented via LMI(linear matrix inequality) technique. Also, the sufficient condition can be rewritten as LMI form in terms of transformed variables through singular value decomposition, some changes of variables, and Schur complements. Therefore, the obtained non-fragile $H_{\infty}$ controller guarantees the asymptotic stability and disturbance attenuation of the closed loop singular systems within a prescribed degree. Moreover, the controller design method can be extended to the problem of robust and non-fragile $H_{\infty}$ controller design method for singular systems with parameter uncertainties. Finally, a numerical example is given to illustrate the design method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.17-24
• /
• 2006

The optical feedforward is known as a complicated technique in spite of its superior linearization. Here we optimized the feedforward circuit parameters using a systematic approach for optimum efficiency. A systematic approach was verified by transmission experiments of 2.14 GHz two tones. The compared third order IMD was enhanced by 38 dB for two-tone case. The experimental results for transmission of W-CDMA signals were described. The ACPR was enhanced by 20 dB for 1 W-CDMA carrier and by 16 dB for 3 W-CDMA carriers. Also, noise level was reduced by 7 dB.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.50-57
• /
• 2009

This paper presents a new model-based macroblock layer rate control algorithm for low bit rate video coding which generates output bits corresponding to a target bit budget. The H.264 standard uses various coding modes and optimization methods to improve the compression performance, which makes it difficult to control the generated traffic accurately in low bit rate environments. In the proposed scheme, we first estimate MAD values of macroblocks in a frame and define a target remaining bits using the estimated MAD values before encoding each macroblock. If a difference between the target value and the actual value is greater than a threshold value, the quantization parameter is adjusted to decrease the difference. It is shown by experimental results that the new algorithm can obtain more than 66% decrease of the difference between the target bits and the resulting bits for a frame with the PSNR performance better than that of the existing rate control algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1305-1315
• /
• 2015

Consider the risk score which is a function of a linear score for the classification models. The AUC optimization method can be applied to estimate the coefficients of linear score. These estimates obtained by this AUC approach method are shown to be better than the maximum likelihood estimators using logistic models under the general situation which does not fit the logistic assumptions. In this work, the VUS and HUM approach methods are suggested by extending AUC approach method for more realistic discrimination and prediction worlds. Some simulation results are obtained with both various distributions of thresholds and three kinds of link functions such as logit, complementary log-log and modified logit functions. It is found that coefficient prediction results by using the VUS and HUM approach methods for multiple categorical classification are equivalent to or better than those by using logistic models with some link functions.