• 한국유체기계학회 논문집
• /
• 제13권1호
• /
• pp.23-28
• /
• 2010

A draft tube which has impeller to elevate bottom water and spread it over surface of lake water, induces convective circulation of lake water, a Long-Distance Circulation (LDC). Circulation of lake water make stratified water mixed and enhance DO (Dissolved Oxygen) of bottom water. Circulation rate of water is determined by draft rate of the tube, which is dependent on design parameters of the draft tube system, i. e. dimension of impeller and diffuser, inclined angle of impeller, impeller shape, and rotational speed. In this study, change in draft rate and power consumption of circulation equipment was investigated numerically with changing impeller dimension, angle and rotational speed. It was found that flowrate of draft water was increased as the dimensions of draft tube and impeller, and rotational speed and inclined angle of impeller increased. The power consumption was also elevated with increasing parameter values, and final selection of parameter values was made to satisfy target flowrates and power consumption.

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.525-537
• /
• 2017

This paper explores different vibration control strategies for the cancellation of human-induced vibration on a structure with time-varying modal parameters. The main motivation of this study is a lively urban stress-ribbon footbridge (Pedro $G\acute{o}mez$ Bosque, Valladolid, Spain) that, after a whole-year monitoring, several natural frequencies within the band of interest (normal paring frequency range) have been tracked. The most perceptible vibration mode of the structure at approximately 1.8 Hz changes up to 20%. In order to find a solution for this real case, this paper takes the annual modal parameter estimates (approx. 14000 estimations) of this mode and designs three control strategies: a) a tuned mass damper (TMD) tuned to the most-repeated modal properties of the aforementioned mode, b) two semi-active TMD strategies, one with an on-off control law for the TMD damping, and other with frequency and damping tuned by updating the damper force. All strategies have been carefully compared considering two structure models: a) only the aforementioned mode and b) all the other tracked modes. The results have been compared considering human-induced vibrations and have helped the authors on making a decision of the most advisable strategy to be practically implemented.

• 대한인간공학회지
• /
• 제7권2호
• /
• pp.31-44
• /
• 1988

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment then the automatic mode changes into the manual mode. The operation by the control program and the operation by a human recover the error in the manual mode. The system resumes the automatic mode and continues the given task. It is necessary to improve the manual mode in order to make the best use of a man-robot system, as a part of the human interface technique. Therefore, the error recovery task is performed by combining the operation by the control program representing autonomy of a robot and the operation by a human representing versatility of a human operator effectively in the view point of human factors engineering. The geometric inverse kinematics is used for the calculation of the robot joint values in the operation by the control program. The singularity operation error and the parameter operation error often occur in this procedure. These two operation errors increase the movement time of the robot and the coordinate reading time, during the error recovery task. A singularity algorithm, parameter algorithm and fuzzy control are studied so as to remove the disadvantages of geometric inverse kinematics. And the geometric straight line motion is studied so as to improve the disadvantages of the operation by a human.

• 대한전자공학회논문지
• /
• 제27권11호
• /
• pp.92-102
• /
• 1990

본 논문은 2-D 영상의 운동 변화량(크기, 회전, 이동)을 추정할 수 있는 새로운 방법을 제안하였다. 이 방법은 입력 영상내의 직선 성분을 Hough 영역에서 한 점으로 대응시키는 Hough 변환 알고리듬을 사용하여 입력 영상에서 크기 변화가 있는 물체의 운동과 그 Hough space상의 특징점들의 변화를 나타내는 운동 변화량들에 대한 관계식을 유도한다. 유도한 관계식은 크기, 회전, 이동을 가지고 모든 입력 영상에 대해서 운동 변화량을 효율적으로 계산할 수 있다. 제안된 관계식을 항공기 영상에 적용하여 운동 변화량을 비교적 정확히 측정하였다. 또한 제안된 방식이 잡음이 섞인 영상에 대해서도 큰 오차 없이 추정 결과를 나타내고 있음을 보인다.

• 한국광학회지
• /
• 제8권3호
• /
• pp.250-253
• /
• 1997

광선로에 존재하는 분산의 영향은 외부 변조기에서 일어나는 Chirp현상과 비선형 현상인 SPM에 따라서 달라지게 된다. SPM의 영향은 신호 파워에 따라 달라지게 되고, 외부 변조하에서의 Chirp은 외부 변조기의 변조 조건에 따라 달라진다. 따라서 광통신 시스템에서는 분산과 SPM, 그리고 처핑 현상을 적절히 이용하여 수신 감도 저하를 최소화할 수 있게 된다. 주어진 광통신 시스템의 광신호 세기 분포 하에서 SPM과 외부 변조기 Chirp을 고려하여 신호 펄스폭의 변화를 Split Step Fourier 방법을 이용하여 수치해석하였으며, 400 km 전송을 목표로 한 경우 수신 감도 저하를 최소화하는 최저의 Chirp인자 값을 얻을 수 있었다. 또한 실제 전송 실험을 통하여 계산 결과와 비교하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1177-1186
• /
• 2017

This paper presents a torque ripple reduction method of direct torque control (DTC) using fuzzy controller with optimal selection strategy of voltage vectors in a five-phase induction motor. The conventional DTC method has some drawbacks. First, switching frequency changes according to the hysteresis bands and motor's speed. Second, the torque ripple is rapidly increased in long control period. In order to solve these problems, some/most papers have proposed torque ripple reduction methods by using the optimal duty ratio of the non-zero voltage vector. However, these methods are complicated in accordance with the parameter. If this drawback is eliminated, the torque ripple can be reduced compared with conventional method. In addition, the DTC can be simply controlled without the use of the parameter. Therefore, the proposed algorithm is changing the voltage vector insertion time by using the designed fuzzy controller. Also, the optimized voltage vector selection method is used in accordance with the torque error. Simulation and experimental results show effectiveness of the proposed control algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.331-332
• /
• 2007

In this work, the TiO2 pigment influence in HDPE dielectric strength was analyzed. Chemical and structural characterizations were made to identify changes during the processing and your influence in the electrical properties, formulations containing 0, 0.5, 1, 2.5, 4 and 6 of titanium dioxide were processed by extrusion and injection molding with stabilization-antioxidants, ultraviolet stabilizers and plasticizers. The electrical strength tests were analyzed by the statistical distribution of Weibull, and the maximum likelihood method. The high concentrations present lower values to electrical strength. The parameter could be using to insulator panicles dispersion. The TiO2 concentration variation shows that these incorporations implicate strength values increase has a maximum (5,35MV/cm). High pigment concentration induces a little falls in property values. Observing the parameter, minimum experiment electric field (Ebmin) and electric strength value, found that the best electric perform formulation was the formulation with 2.5% TiO2 weight.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1982-1983
• /
• 2007

In this work, the $TiO_2$ pigment influence in HDPE dielectric strength was analyzed. Chemical and structural characterizations were made to identify changes during the processing and your influence in the electrical properties. Formulations containing 0, 0.5, 1, 2.5, 4 and 6 of titanium dioxide were processed by extrusion and injection molding with stabilization-antioxidants, ultraviolet stabilizers and plasticizers. The electrical strength tests were analyzed by the statistical distribution of Weibull, and the maximum likelihood method. The high concentrations present lower values to electrical strength. The ${\beta}$ parameter could be using to insulator particles dispersion. The TiO2 concentration variation shows that these incorporations implicate strength values increase has a maximum (5,35MV/cm). High pigment concentration induces a little falls in property values. Observing the ${\beta}$ parameter, minimum experiment electric field (Ebmin) and electric strength value, found that the best electric perform formulation was the formulation with 2.5% TiO2 weight.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권4호
• /
• pp.294-298
• /
• 2009

본 연구에서는 에지 성분의 추출을 보다 섬세하게 처리함으로써 이미지 화질을 개선하기 위한 방법을 제안한다. 제안 방법은 고전적인 보간을 응용한 ESII(Edge Sensitive Image Interpolation)으로 보간 커널 식에서 고정된 매개 변수를 사용하지 않고 주변 화소 값으로부터 적절한 정보를 얻어내서 매 화소마다 매개변수를 변화시킨다. LSE(Least Square Error)를 이용하여 CME(Camera Modelling Error)를 최소화 하도록 보간 할 화소 값을 결정함으로써 이미지를 복원하며, 기존 방법에 비교하여 객관적, 주관적 화질이 우수함을 실험, 제시하였으며 또한 영상을 1차원 정보로 분리하여 고려한 결과 계산상의 복잡도를 줄이는 효과를 기대할 수 있다.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.903-907
• /
• 1998

Mass transfer characteristics during osmotic dehydration of mushrooms(Agaricus bisporus) in sugar solution were studied as a function of sugar concentration, immersion time and temperature, and the effect of osmotic dehydration on browning inhibition of air-dried mushrooms was also evaluated. Increasing the sugar concentration, immersion time and temperature increased moisture loss, sugar gain, molality and rate parameter. The changes of sugar gain and rate parameter were more significantly affected by concentration than by temperature of sugar solutions, while 1$0^{\circ}C$ increase in temperature or 10 Brix increase in concentration had the same effect on water loss. Water loss, sugar gain, molality were rapid in the first period of osmotic dehydration especially in the case of higher concentration and temperature of sugar solutions. Effects of osmotic dehydration in sugar solution(60 Brix, 8$0^{\circ}C$) with 18 min of immersion time(O.D.=0.099) rior to air dehydration on browning inhibition of dried mushrooms were more significant than blanching in water(8$0^{\circ}C$) with the same immersion time(O.D.=0.330) and the control (O.D.=0.559).