• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.407-413
• /
• 2011

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR (Stepped Impedance Resonator), U-shaped open stub with hair-pin and vertical-type structure than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 24.5 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.165-170
• /
• 2001

In normal grinding abrasive particles of a grinding wheel rotate on planes parallel to the direction of workpiece fred. which may induce continued scratch lines on ground surface as the workpiece feeds. Instead in helical scan grinding the planes make an angle, called a helical angle, with the feeding direction. Thus scratch lines produced by abrasive particles per one revolution are discontinued which implies that the generation of scratch lines are suppressed by the helical scan grinding. In this study some experimental works have been done on the helical scan grinding of glass to find the effects of grinding conditions on the surface roughness and estimate the optimal grinding conditions. The helical angle, fred rate, material removal rate and the wheel speed are taken as factors for three kinds of grinding wheels i.e., coarse(#140 mesh), medium(#400) and fine(#800) diamond wheels. The experiments are scheduled by Taguchi technique and ANOVA has been carried out for the interpretation of the results. As a result of this study effects of the factors are verified quantitatively showing that the major factors are changed according to the wheel's mesh size and the helical angle is one of the influencing factors on the surface quality.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.162-166
• /
• 2020

The present paper presents an array antenna of a microstrip patch for 5G applications. Four rectangular microstrip patch elements are arranged in parallel and series to form an array antenna. Two insets are made on both sides of each patch element to achieve a wide frequency bandwidth of 23.97-31.60 GHz. To attain a high gain and wider bandwidth, the microstrip patch antenna is fed using series and corporate feeding networks. Further, three director elements on top of the top-most patch elements, and one reflector element at the open end of each patch element, are added. The addition of the Yagi elements improved the overall gain and acquired a higher radiation efficiency throughout the operating frequency bandwidth, with the array antenna achieving a maximum peak gain of 8.7 dB. The proposed antenna is built on a low-loss and low-cost substrate of FR4-eproxy. The proposed antenna design with a simple structure is suitable for Internet of Things and 5G applications.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1350-1351
• /
• 2008

대기압 플라즈마를 발생시키는 것은 종래의 저기압 플라즈마를 발생시키는 것 보다 대단히 어렵다. 하지만, 대기압 플라즈마는 진공장치가 필요 없고, 제작방식이 비교적 간편하며 살균, 의료, 표면처리 등 다양한 응용이 가능해서 그 잠재력이 매우 크다. 본 연구에서는 유전체가 없는 두 전극사이에서 대기압 저온 마이크로 플라즈마를 발생시켰으며, submicrosecond pulse 파형으로 glow discharge를 유지할 수 있었다. 플라즈마 소스의 전극 간격은 200[${\mu}m$]이고 방전개시전압은 약 450${\sim}$600[V]이다. 플라즈마를 발생시키기 위한 feeding gas는 He 100%이다. 본 연구에서 개발된 대기압 플라즈마는 소비전력이 2[W]미만으로 온도는 조건에 따라 40$^{\circ}C$미만으로 발생 가능하다. 또한 스펙트럼 분석 시 777nm인 산소원자의 peak이 다른 원자 혹은 분자들의 peak보다 월등히 높다.

• Toxicological Research
• /
• v.20 no.4
• /
• pp.339-348
• /
• 2004

Paecilomyces sinclairii was administered ad libitum feeding at percentage levels of 0, 1.25, 2.5, 5 and 10 percentage (calculated about 8 g/kg)/feeder for a period of 3 months. There was no observed clinical signs or deaths related to treatment in all groups tested. Therefore, the approximate lethal dose of P. sinclairii was considered to be higher than 8 g/kg in rats. Mild decreases in body weight gain were observed dose-dependently in P. sinclairii treated groups in dose response manner after 2 weeks. Interestingly, the weight of abdominal adipose tissues surrounding epididymides were greatly reduced by this Dongchunghacho, in parallel with the mild increase in body weight gain. However, the absolute weight change of other organs was not observed. There were not significantly different from the control group in urinalysis, ocular examination, hematological, serum biochemical value and histopathological examination. From these results, it is concluded that the no-observed-adverse-effect level (NOAEL) of P. sinclairii is less than 1.25% (1 g/kg) in rats in the present study.

• The Korean Journal of Physiology
• /
• v.18 no.2
• /
• pp.117-124
• /
• 1984

It has been recently reported that cingulate cortex mar facilitate gastric acid secretion, but its facilitatory mechanism on the gastric acid secretion is still unclear. This study was undertaken to investigate the facilitatory mechanism of the cingulate cortex upon gastric acid secretion in rats. Twenty·three male albino rats were divided into the cingulate(N= 13) and the operated control(N= 10) groups. The cingulate group in which cingulate cortex was removed by suction through a slit-shaped opening on each side of, and parallel to, the sagittal suture. In the operated control group, the surgical procedure was ended with the skull opening and the incision of dura mater. The gastric juice was collected via a chronic gastric cannula after 24 hours of fast, with water ad libitum. The juice was collected continuously for 6 hours, starting 3 hours prior to the injection of gastric secretagogue, pentagastrin$(12\;{\mu}g/kg)$ or histamine dihydrochloride $(320\;{\mu}g/kg)$. Three one·hour samples were obtained before ana after the administration of each secretagogue. The two agents were injected separately and subcutaneously at intervals of 1 week, the blood samples were drawn from the abdominal aorta for the radioimmunoassay of postprandial plasma gastrin concentration in response to the forced feeding of 10% cod liver oil. 1) After pentagastrin administration, the volume of gastric juice tended to decrease, but its acidity tended to increase in the cingulate group compared with those of the operated control group. However, there was no any difference in the acid output between the two groups. 2) Histamine-stimulated acid output and volume of the gastric juice of the cingulate group decreased significantly compared with those of the operated control group, while there was not significantly different in the acidity between the two groups. 3) Before pentagastrin or histamine administration, any change was not observed in the gastric acid secretion following the cingulate cortical ablation. 4) Postprandial plasma gastrin concentration in response to the forced feeding of 10% cod liver oil was insignificantly lower in the cingulate group than in the operated control group. It is inferred from the above results that the cingulate cortex exerts a facilitatory influence upon the histamine-stimulated gastric acid secretion in rats, and its influence may not be mediated by the stimulation of gastrin secretion.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.266-287
• /
• 1998

Environmental conditions and expected profit are the major criteria to select crops to be cultivated in any region. Traditionally, miscellaneous crops have been cultivated as alternative crop in case of unfavorable climate or supplementary crop in marginal lands. Since the successful breeding of high yielding varieties of staple crops and development of cultural techniques in 1970s in Korea, production of miscellaneous crops decreased markedly due to the rapid commercialization of agriculture and increased productions of horticultural crops, although yields have been doubled during the last $2\~3$ decades. On the other hand, animal husbandry has been developing remarkably parallel with national economic development and the increased consumption of animal products. As a result, imports of feed grains such as corn have increased rapidly, while roughage production became lower than demand. Among miscellaneous crops, corn production increased markedly through the development of hybrids and due to its importance as silage crops. Acreage of corn production including grains, fresh corns and feeding is about 120,000 ha, while acreage of buckwheat is about 5,000 ha and those of other miscellaneous crops decreased to a level of about 1,000 ha. Although miscellaneous crops have low yield potential and are unprofitable due to low price and imports of cheap foreign products, they should be kept to cultivate. Miscellaneous crops are important components that maintain diversity among upland crops as well as alternative crops in case of unfavorable climate. The low yield potential of miscellaneous crops might be due to lack of efforts to breed high yielding varieties and to develope cultural techniques. Continuous investment in research, exploitation of new utilization for miscellaneous crops as sustainable crop, honey crop and sightseeing crop, and development of healthy and special foods will promote their cultivation. Animal feeding in Korea depends mainly on formula feeds. As the number of animals increases to meet demand of animal products, there is no alternative way but to import grains to feed them. But roughage production, which is necessary for normal growth of ruminant animals, should be increased. However, lack of arable land and pasture land limits the production of good roughages. It is estimated that number of course for meat and milk production will be $2.5{\~}2.6$ million and total of $6.2{\~}7.5$ million tons of roughages should be produced. This implies that more than 1 million tons of roughage are needed, although pasture land, upland for forage crops, forage crops after rice cultivation and rice straw are utilized. Therefore, new reclamation of pasture land, increased roughage production in cultivating land, increased cultivation of forage crops after rice, more utilization of rice straw and active exploration of indigenous plant species as roughage resources should be promoted

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.2
• /
• pp.141-148
• /
• 2019

This study examined the effect of insulin-like growth factor (IGF)-I expression in the liver and muscle on the growth of Paralichthys olivaceus fed diets low in fish meal. A feeding experiment was conducted at Jeju National University, Jeju Island, Korea. Groups of P. olivaceus (total initial weight: 200 g) were maintained for 20 weeks on one of five experimental diets containing different proportions of fish meal. Diets containing 0%, 20%, 30%, 40%, and 50% fish meal were labeled FM0, FM20, FM30, FM40, and FM50, respectively. Fish growth was observed every 4 weeks during the feeding experiment, and plasma and liver and muscle tissues were sampled. Plasma IGF-I levels were analyzed using an ELISA kit. The mechanism of IGF-I receptor signaling was examined using immunoblotting and reverse transcription-polymerase chain reaction. The greatest total weight increase was observed in the FM30 group. In parallel, plasma levels of IGF-I and IGF-binding protein were highest in the FM30 group, and mRNA and protein expression were also significantly higher in this group. The first step in the IGF-I signaling pathway, tyrosine-phosphorylation checking, occurred smoothly until 20 weeks. These results suggest that a dietary ratio of 30% fish meal best promotes growth in this species. The IGF-I signaling pathway in the liver and muscle is associated with growth in P. olivaceus.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.216-225
• /
• 2006

This paper presents a new circuit topology of DC busline switch and snubbing capacitor-assisted full-bridge soft-switching PWM inverter type DC-DC power converter with a high frequency link for low voltage large current applications as DC feeding systems, telecommunication power plants, automotive DC bus converters, plasma generator, electro plating plants, fuel cell interfaced power conditioner and arc welding power supplies. The proposed power converter circuit is based upon a voltage source-fed H type full-bridge high frequency PWM inverter with a high frequency transformer link. The conventional type high frequency inverter circuit is modified by adding a single power semiconductor switching device in series with DC rail and snubbing lossless capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge inverter arms and DC busline can achieve ZVS/ZVT turn-off and ZCS turn-on commutation operation. Therefore, the total switching losses at turn-off and turn-on switching transitions of these power semiconductor devices can be reduced even in the high switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules is selected to be 60 kHz. It is proved experimentally by the power loss analysis that the more the switching frequency increases, the more the proposed DC-DC converter can achieve high performance, lighter in weight, lower power losses and miniaturization in size as compared to the conventional hard switching one. The principle of operation, operation modes, practical and inherent effectiveness of this novel DC-DC power converter topology is proved for a low voltage and large current DC-DC power supplies of arc welder applications in industry.