• 대한수학회지
• /
• 제55권4호
• /
• pp.923-938
• /
• 2018

In this paper, we handle the Gauss map of a tubular surface which is constructed according to the parallel transport frame of its spine curve. We show that there is no tubular surface having harmonic Gauss map. Moreover, we give a complete classification of this kind of tubular surface having pointwise 1-type Gauss map in Euclidean 4-space ${\mathbb{E}}^4$.

• 한국멀티미디어학회논문지
• /
• 제16권2호
• /
• pp.160-168
• /
• 2013

본 논문에서는 단순 폐곡선으로 구성된 형태열을 형태 다양체의 기하학적 특성에 따라 평행한 무빙 프레임으로 표현하는 기법을 개발한다. 형태 다양체는 기본적으로 유클리드 공간이 아니어서 형태열(곡선)에서 구한 접벡터의 변화율 등을 측정하기가 매우 어렵다. 레비 치비타 접속(Levi-Civita connection) 이론에 의하면 무빙 프레임을 주어진 형태열에 따라 평행 이동할 수 있으면 공변미분을 통하여 접벡터장의 변화율을 측정하는 것이 가능하다. 따라서 본 논문에서는 주 프레임 다발(principal frame bundle)의 개념을 도입하여 비유클리드 공간의 형태열의 접벡터를 유클리드 공간으로 평행 이동시키는 툴을 구현하고 실험을 통하여 이의 특성을 확인하고 분석한다.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.1017-1021
• /
• 2013

The traffic signal has been widely used in the transport system with a fixed time interval currently. This kind of setting time was determined based on experience for vehicles to generate a waiting time while allowing pedestrians crossing the street. However, this strict setting causes inefficient problems in terms of economic and safety crossing. In this research, we propose a monitoring algorithm to detect, track and check pedestrian crossing the crosswalk by the patterns of behavior. This monitoring system ensures the safety for pedestrian and keeps the traffic flow in efficient. In this algorithm, pedestrians are detected by using HOG feature which is robust to illumination changes in outdoor environment. According to a complex computation, the parallel process with the GPU as well as CPU is adopted for real-time processing. Therefore, pedestrians are tracked by the relationship of hue channel in image sequence according to the predefined pedestrian zone. Finally, the system checks the pedestrians' crossing on the crosswalk by its HOG based behavior patterns. In experiments, the parallel processing by both GPU and CPU was performed so that the result reaches 16 FPS (Frame Per Second). The accuracy of detection and tracking was 93.7% and 91.2%, respectively.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1110-1121
• /
• 2016

The mathematical model of a three phase PWM converter under the stationary αβ reference frame is deduced and constructed based on a Proportional-Resonant (PR) regulator, which can replace trigonometric function calculation, Park transformation, real-time detection of a Phase Locked Loop and feed-forward decoupling with the proposed accurate calculation of the inductance voltage vector. To avoid the parallel resonance of the LCL topology, the active damping method of the proportional capacitor-current feedback is employed. As to current vector error elimination, an optimized PR controller of the inner current loop is proposed with the zero-pole matching (ZPM) and cancellation method to configure the regulator. The impacts on system's characteristics and stability margin caused by the PR controller and control parameter variations in the inner-current loop are analyzed, and the correlations among active damping feedback coefficient, sampling and transport delay, and system robustness have been established. An equivalent model of the inner current loop is studied via the pole-zero locus along with the pole placement method and frequency response characteristics. Then, the parameter values of the control system are chosen according to their decisive roles and performance indicators. Finally, simulation and experimental results obtained while adopting the proposed method illustrated its feasibility and effectiveness, and the inner current loop achieved zero static error tracking with a good dynamic response and steady-state performance.

• 한국정보통신학회논문지
• /
• 제25권12호
• /
• pp.1859-1867
• /
• 2021

자율주행차량을 위해 다수의 LiDAR 센서가 차량에 탑재되고 있으며, 다수의 LiDAR 센서가 탑재됨에 따라 이를 전처리해줄 시스템이 요구되었다. 이러한 전처리 시스템을 거쳐 메인 프로세서에 센서의 데이터를 전달하거나 이를 처리할 경우 막대한 데이터양에 의해 전송 네트워크에 부하를 야기하고 이를 처리하는 메인 프로세서에도 상당한 부하를 야기하게 된다. 이러한 부하를 최소화하고자 LiDAR 센서의 데이터 중 프레임 간 데이터 비교를 통해 의미 있는 데이터만을 전송하고자 한다. 움직이는 객체가 없는 정적인 실험 환경과 센서의 시야각 내에서 사람이 움직이는 동적 실험환경에서 최대 4대의 LiDAR 센서의 데이터를 처리하였을 때, 정적 실험 환경일 경우 232,104 bytes에서 26,110 bytes로 약 89.5% 데이터 전송량을 줄일 수 있었으며, 동적 실험 환경일 경우 29,179 bytes로 약 88.1%의 데이터 전송량을 감축할 수 있었다.