• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.325-335
• /
• 2019

In this paper, a novel adaptive gripper with underactuation is presented, which can change its configuration to parallel or power grip mode according to object shapes. Differently from the commercial adaptive gripper by RobotiQ, the proposed gripper includes an actual parallelogram inside a five-bar mechanism, which allows the free selection of actuator locations and can reduce actuation torques effectively. The forward and inverse kinematics for two grip modes and statics analysis have been analyzed. From the comparative design, the proposed gripper has about 20% smaller size, 3.7% larger stroke, and 30.5% smaller average actuation torque than the commercial one.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.313-321
• /
• 2020

In this paper, two types of linear actuation methods for the previously proposed adaptive gripper are presented, which includes actual parallelogram inside a five-bar mechanism and has the advantages of smaller actuation torque and larger stroke over the commercial adaptive gripper by RobotiQ. The forward/inverse kinematics and statics analyses for two types of linear actuations are derived. From the inverse kinematics and statics analyses, linear actuation type I is selected and the gripper prototype is designed.

• 한국노년학
• /
• v.40 no.1
• /
• pp.91-109
• /
• 2020

This study aims to investigate the interdependence of Korean middle and old-aged couples in the association between exercise and life satisfaction through grip strength trajectory. Data were drawn from the nationally representative Korea Longitudinal Study of Aging (KLoSA) collected from 2006 to 2016. The sample included couples over 45 years of age in the first wave and participated in all six waves of the survey (Ncouple=1,997). There were three steps for analyses: correlation, parallel latent growth curve model, tests of indirect effects of the mediation paths. Covariates included in the models were husbands and wives' characteristics (age, education, work status, chronic diseases, marital satisfaction, contact frequency with friends or neighbors) and couple's household income. Results showed husbands' and wives' life satisfaction and grip strength were interdependent upon each other. Also, exercise participation of both husbands and wives was associated with both husbands' and wives' life satisfaction via the initial level of grip strength of husbands. Moreover, exercise participation of only husbands was associated with wives' life satisfaction through the initial grip strength of husbands. These results suggest the aging processes of middle and old-aged couples need to be understood in the context of gender dynamics and couple interdependence.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.379-386
• /
• 2001

The lower toughness or brittle materials for mechanical test lead to the additional requirement that applied displacements be controlled with high resolution. Biaxial tension and shear tester using stepper motor with harmonic driver is shown. The device had to be high resolution so that the crack initiation process of slow extension and steady growth could be examined, Grip plates were connected to a linear bearing and actuator. The actuators consisted of stepper motors with harmonic driver connected to pre-loaded ball screw and nut assemblies. The encoders and motor controllers were connected to a personal computer so that arbitrary displacements histories could he prescribed in normal and tangential directions. The linear bearings were used to react loads perpendicular to their axes while allowing low friction, parallel movement of the attached grips. Load cells measured the reactions normal and tangential. the loads measured the reactions were recorded by the computer.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.185-193
• /
• 2022

For grippers of industrial robots, parallel grippers and multi-function finger grippers are used. The former has the advantage of low cost but has the disadvantage of low precision, and the latter has the advantage of excellent precision but has the disadvantage of being expensive. In this paper, we developed a grip that can detects the various shapes of the object to be gripped on the gripper surface by using mesured pressure information frome Veloset Sheet sensor so that the gripper can be gripped without deforming the surface of the gripper. Also we did not only developed the array type gripper and 4 array type grippers (ATG), but also confirmed the usefulness of array type gripper developed in this study according to the 4 predefined evaluation criteria

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.2
• /
• pp.77-88
• /
• 2016

Purpose : The purpose of this study was to explore an effect exerted to non-affected hand and affected hand of patients by performing training of chopsticks and grasp strength that are helpful to dexterity and grasp strength of hand together with training method of joint exercise, muscle strength build-up training, delicate hand function training. Method : By targeting 30 normal adult male/females engaged in K university, Busan for one month on April, 2015, 10 persons of hand function build-up training group, that of dexterity training group and 10 persons of control group were randomly selected. For hand function build-up training group, chopsticks training in parallel with total 20 times of grasp strength training for 4 weeks including 5 minutes of dominant hand grasp strength training, 5 minutes of non-dominant hand grasp strength training, 15 minutes of chopsticks training was performed based on 25 minutes/one time, 5 times a week. Result : First, In a comparison of dexterity of both hands by each group depending on training period, hand function build-up group and dexterity training group were represented to be effective compared with control group. Secondly, In a comparison of manipulatory ability of both hands by each group depending on training period, hand function build-up group and dexterity training group were represented to be effective compared with control group. Conclusion : It is considered that diversified and broad research covering patients with musculoskeletal disease and nervous system-related disease would be performed by securing far more test subjects after comparing a correlation between dexterity training and hand function training.