• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권9호
• /
• pp.273-278
• /
• 2014

최근 전력의 수요공급 불균형으로 전력사용 피크시간대의 전력사용 강제 제한이 불가피하다. 따라서, 본 논문에서는, 피크전력이 발생하지 않는 시간대의 전기를 저장하고 전력부족이 예상되는 피크전력 시간대에는 저장전력을 공급하는 병렬운전 기기의 회로를 설계하는데 있다. 이 회로설계를 통하여, PRS의 핵심기능인 상용전원과 인버터 발생전원의 병렬연결 운용으로, 상용전원의 피크치 전력을 조절할 수 있었다. 또한 효율을 높이기 위하여 Transless Power Circuit DC-AC 인버터를 개발하였다. 더 나아가, 가변임피던스 제어를 적용하여 무정전 전원장치의 저장전력을 상용전원과 연계함으로써, 기존의 무정전 전원장치에서 구현을 못하고 있는 저장전력 사용시간을 획기적으로 늘릴 수 있는 기술구현 가능성을 입증하였다.

• 대한전자공학회논문지
• /
• 제8권2호
• /
• pp.24-33
• /
• 1971

부성특성회로로서 쌍트랜지스터 회가의 양에미터단자사이에 용량 C와 저항 R의 병렬회로를 삽입하고, 표준화주파수의 단형파전류원를 에미터·바이어스전류원으로 하여 쌍회로를 구동하면, RC병렬회로는 정부변조회로의 적분회로로서 동작시킬 수 있다. 이 적분회로와 직렬로 신호파전압원을 접속시키면 쌍회로가 구동전원의 표준화펄스에 의하여 구동될 때 마다, RC 적분회로의 적분전압과 신호파전압이 서로 비교되기 때문에 그들의 차전압에 의하여 쌍회로의 트랜지스터들 중의 어느 한 쪽이 ON되기 때문에 그 베이스결합저항단자에는 one bit의 펄스가 송출된다. 본실험에서는 극히 간소한 회로구성을 갖는 쌍트랜지스터회로에 의한 정착변조회로를 제시하고 그들의 특성을 부기하였다. 정착변조파의 품질 혹은 S/N비의 향상을 위하여 고려하여야 할 문제로서, 적분회로의 회로정수 및 양자화전압의 구동펄스의 파고와 파폭의 관계를 검토한다.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.78-83
• /
• 2005

본 논문에서는 적층 Inter-digital 공진기를 이용한 LTCC 대역통과 여파기의 등가회로를 제안하고, 2.4 GHz 대역의 여파기 설계에 적용하였다. 본 논문의 LTCC 적층 칩 대역통과 여파기는 평면상에서는 Comb-line 구조이고 단면상에서는 Inter-digital 구조로 구성된다. Comb-line 구조와 Inter-digital 구조의 평행 결합선로의 등가회로를 본 논문의 여파기에 적용하여 여파기 전체의 등가회로를 구성하였다. 이 등가회로는 공진기 사이의 결합 구조가 다중의 결합 구조를 갖는다. 이를 하나의 결합 구조로 통합하여 인버터를 이용한 대역통과 여파기의 설계방법을 적용하였다. 2.4 GHz 대역에서 3단의 대역통과 여파기를 설계, 제작하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.902-907
• /
• 2002

An equivalent electroacoustic circuit approach of estimating the sound absorption coefficient for parallel perforated plate system is proposed. The proposed approach is validated by comparing the calculated absorption coefficients of a parallel single layer perforated plate system with the values measured by the two-microphone impedance tube method for various porosity and the number of perforated plate. The sound absorbing performances of parallel and series perforated plate systems are compared and discussed from a standpoint of frequency bandwidth with sound absorption. The proposed approach is further extended to the parallel double layer perforated plate system.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.701-710
• /
• 2017

This paper presents a five-level PWM inverter using series and parallel connection of voltage sources. The alternative connection is done by an auxiliary circuit consisted of a switch, three diodes, and two batteries. The auxiliary circuit is located between input dc voltage source and H-bridge cell. Thanks to the auxiliary circuit, the proposed inverter synthesizes five-level output voltage in an effective way. Topologically both batteries are charged and discharged in the same rate, so it does not need to apply battery voltage balancing control method. Theoretical analysis of the proposed inverter is verified by computer-aided simulation and experiment based on a prototype of 1kW.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1083-1090
• /
• 2015

A generalized recursive circulant network(GR) is widely used in the design and implementation of local area networks and parallel processing architectures. In this paper, we investigate the routing of a message on this network, that is a key to the performance of this network. We would like to transmit maximum number of packets from a source node to a destination node simultaneously along paths on this network, where the i^th packet traverses along the i^th path. In order for all packets to arrive at the destination node securely, the i^th path must be node-disjoint from all other paths. For construction of these paths, employing the Hamiltonian Circuit Latin Square(HCLS), a special class of (n x n) matrices, we present O(n²) parallel routing algorithm on generalized recursive circulant networks.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.173-178
• /
• 2000

The time sharing type high frequency inverter using serial-parallel resonant to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper. This proposed inverter can reduce distribution of the switching current because of using the current of serial resonant circuit to the input current of the parallel one. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, according to the calculated characteristics value, a method of the circuit design and operating characteristics of the inverter is proposed. In addition, this paper proves the validity of theoretical analysis through Simulation. This proposed inverter show that it can be practically used in future as power source system for induction heating application, DC-DC converter etc.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.49-54
• /
• 2010

This paper describes a fast circuit simulation technique using the latency insertion method (LIM) with a parallel and distributed leapfrog algorithm. The numerical simulation results on the PC cluster system that uses the cloud computing system are shown. As a result, it is confirmed that our method is very useful and practical.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1065-1075
• /
• 2001

It is common knowledge amongst electrical and marine engineers that short-circuit in electrical system may cause large mechanical torque on generator and prime mover However, it is not so widely known that the faulty synchronizing of generators may cause even higher torques than that of short-circuit. In this study, the transient phenomena related to the parallel running of synchronous generators are analyzed and the exact computer simulation method is proposed. In result, maximum transient torque and current take place in case of $120^{\circ}$ voltage angle difference between Master and Slave and that may develop higher torque than the short-circuit according to a condition of synchronizing. When synchronizing in power system using only two generators higher torque and current occur Master, but using multimachine system those occur to Slave. The short-circuit of marine generator does not happen frequently but faulty synchronizing sometimes takes place, therefore, it is necessary for designers to consider these phenomena.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.180-185
• /
• 2003

The equivalent electroacoustic circuit approach has been conventionally used for the analysis of the multiple layer perforated plate system. However, it is found that an analogy error has been involved in the equivalent electroacoustic approach proposed by previous researchers for the element of straight pipe. Although the pipe between the perforated layers is a distributed element in the analogy, it has been treated as a parallel element by previous investigators. The analogy error is demonstrated by comparing the calculated absorption coefficients based on the parallel circuit and the distributed circuit, respectively, with the measured values by the two-microphone impedance tube method.