• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.333-340
• /
• 2004

In order that routers forward a packet to its destination, they perform IP address lookup which determines the next hop according to the packet's destination address. In designing high speed routers, IP address lookup is an important issue. In order to design high speed routers, this paper proposes a parallel IP lookup scheme which consists of several IP lookup engines without any modification of already fabricated indirect IP lookup chipsets. Also, we propose a simple rule for partitioning IP prefix entries In an overall forwarding table among several IP lookup engines. And we evaluate the performance of the proposed scheme in terms of the memory size required for storing lookup information and the number of memory accesses on constructing the forwarding table. With additional hardware logics, the proposed scheme can reduce about 30% of the required memory size and 80% of the memory access counts.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.44-51
• /
• 2013

Routers should perform fast IP address lookup for Internet to provide high-speed service. In this paper, we present a hybrid parallel IP address lookup structure composed of four-stage pipeline. It achieves parallelism at low cost by using multiple SRAMs in stage 2 and partitioned TCAMs in stage 3, and improves the performance through pipelining. The smart distributor in stage 1 does not transfer any IP address identical to previous one toward the next stage, but only uses the result of the previous lookup. So it improves throughput of lookup by caching effects, and decreases the access conflict to TCAM bank in stage 3 as well. In the last stage, the reorder buffer rearranges the completed IP addresses according to the input order. We evaluate the performance of our parallel pipelined IP lookup structure comparing with previous hybrid structure, using the real routing table and traffic distributions generated by Zipf's law.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.65-71
• /
• 2005

The primary function of the Internet routers is to forward incoming packets toward their final destinations. IP address lookup is one of the most important functions in evaluating router performance since IP address lookup should be performed in wire-speed for the hundred-millions of incoming packets per second. With CIDR, the IP prefixes of routing table have arbitrary lengths, and hence address lookup by exact match is no longer valid. As a result, when packets arrive, routers compare the destination IP addresses of input packets with all prefixes in its routing table and determine the most specific entry among matching entries, and this is called the longest prefix matching. In this paper, based on parallel multiple hashing and prefix grouping, we have proposed a hardware architecture which performs an address lookup with a single memory access.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.84-98
• /
• 2009

Various algorithms and architectures for IP address lookup have been studied to improve forwarding performance in the Internet routers. Previous IP address lookup architecture using Bloom filter requires a separate Bloom filter as well as a separate hash table in each prefix length, and hence it is not efficient in implementation complexity. To reduce the number of hash tables, it applies controlled prefix expansion, but prefix duplication is inevitable in the controlled prefix expansion. Previous parallel multiple-hashing architecture shows very good search performance since it performs parallel search on tables constructed in each prefix length. However, it also has high implementation complexity because of the parallel search structure. In this paper, we propose a new IP address lookup architecture using all-length Bloom filter and all-length multiple hash table, in which various length prefixes are accomodated in a single Bloom filter and a single multiple hash table. Hence the proposed architecture is very good in terms of implementation complexity as well as search performance. Simulation results using actual backbone routing tables which have $15000{\sim}220000$ prefixes show that the proposed architecture requires 1.04-1.17 memory accesses in average for an IP address lookup.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.158-166
• /
• 2004

Address lookup is one of the most essential functions of the Internet routers and a very important feature in evaluating router performance. Due to the facts that the Internet traffic keeps growing and the number of routing table entries is continuously growing, efficient address-lookup mechanism is indispensable. In recent years, various fast address-lookup schemes have been proposed, but most of those schemes are not practical in terms of the memory size required for routing table and the complexity required in table update In this paper, we have proposed a parallel IP address lookup architecture based on multiple hashing. The proposed scheme has advantages in required memory size, the number of memory accesses, and table update. We have evaluated the performance of the proposed scheme through simulation using data from MAE-WEST router. The simulation result shows that the proposed scheme requires a single memory access for the address lookup of each route when 203kbytes of memory and a few-hundred-entry TCAM are used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2B
• /
• pp.138-143
• /
• 2003

One of the important design issues for IP routers responsible for packet forwarding in computer networks is the route-lookup mechanism. For each incoming packet, IP routing requires that a router performs a longest-prefix-match address lookup in order to determine the next hop that the incoming packet should be forwarded to. In this paper, we present a new scheme which applies the hashing function for IP address lookup. In the proposed scheme, the forwarding table is composed of multiple SRAMs, and each SRAM represents an address lookup table in each prefix. Hashing function is applied in order to find out the matching entries from the address lookup tables in parallel, and the entry with the longest prefix match among them is selected. Simulation using the MAE-WEST router example shows that a large routing table with 37000 entries can be compacted to a forwarding table of 300 Kbytes in the proposed scheme. It is also shown that the proposed scheme achieves one route lookup every 1.93 memory accesses in average.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.345-353
• /
• 2003

When designing network processors or implementing network equipments such as routers are implemented, IP lookup operations cause the major impact on their performance. As the organization of the IP address becomes simpler, the speed of the IP lookup operations can go faster. However, since the efficient management of IP address is inevitable due to the increasing number of network users, the address organization should become more complex. Therefore, for both IPv4(IP version 4) and IPv6(IP version 6), it is the essential fact that IP lookup operations are difficult and tedious. Lots of researcher for improving the performance of IP lookups have been presented, but the good solution has not been came out. Software approach alleviates the memory usage, but at the same time it si slow in terms of searching speed when performing an IP lookup. Hardware approach, on the other hand, is fast, however, it has disadvantages of producing hardware overheads and high memory usage. In this paper, conventional researches on IP lookups are shown and their advantages and disadvantages are explained. In addition, by mixing two representative structures, a new hybrid parallel architecture for fast IP lookups is proposed. The performance evaluation result shows that the proposed architecture provides better performance and lesser memory usage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1922-1940
• /
• 2019

IP address lookup is a function to determine nexthop for a given destination IP address. It takes an important role in modern routers because of its computation time and increasing Internet traffic. TCAM-based IP lookup approaches can exploit the capability of parallel searching but have a limitation of its size due to latency, power consumption, updatability, and cost. On the other hand, multibit trie-based approaches use SRAM which has relatively low power consumption and cost. They reduce the number of memory accesses required for each lookup, but it still needs several accesses. Moreover, the memory efficiency and updatability are proportional to the number of memory accesses. In this paper, we propose a novel architecture using an Indexed Multibit Trie (IMT) which is based on combined TCAM and SRAM. In the proposed architecture, each lookup takes at most two memory accesses. We present how the IMT is constructed so as to be memory-efficient and fast updatable. Experiment results with real-world forwarding tables show that our scheme achieves good memory efficiency as well as fast updatability.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.93-100
• /
• 2010

In this paper, we propose a technique which makes it faster to delete prefixes in an IP address lookup architecture based on parallel TCAMs. In previous deletion schemes, more than one memory movement is needed for the prefix ordering and keeping the available memory space consecutive. For deletion, our scheme stores the address of the deleted prefix in a stack implemented by SRAM instead of actual movement in TCAM. Since SRAM has very short latency compared to TCAM, the proposed scheme can accomplish fast updating. From the experiment with the real forwarding table and update trace, we evaluate the performance of our scheme in terms of the memory access time for the prefix insertion and deletion. The experiment result also shows good performance with considerably small size of stack.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1297-1300
• /
• 2002

포워딩 엔진은 외부 인터페이스를 통해서 들어오는 패킷에 대해서 IP 주소를 기반으로 목적지로 향하는 다음 홉을 결정한다. 이러한 고속의 패킷 처리를 위한 포워딩 엔진을 설계함에 있어서 IP 주소 탐색은 중요한 요인이다. 본 논문에서는 검색경로 압축 트라이에 기반한 IP 주소 탐색 알고리즘을 병렬화 하는 기법을 제시한다. 제시된 병렬화를 통해서 IP 주소 탐색의 메모리 접근 횟수글 줄일 수 있으며, 고성능의 패킷 포워딩 엔진에 적용할 수 있다.