• Asian-Australasian Journal of Animal Sciences
• /
• 제13권2호
• /
• pp.167-175
• /
• 2000

This paper describes the magnetic orientation of bull sperm separated into the head and the flagellum treated by DTT or heparin in a 5,400G static field. Semen samples collected from four bulls (Japanese Black) were mixed to the same sperm density. One percentage triton X-100 was used to extract the plasma membrane. The intact and demembranated sperm suspensions were treated with 20, 200, 2,000 mM DTT, 100, 1,000 or 10,000 units heparin solutions at $4^{\circ}C$ for 6 days. The decondensation of the sperm nuclei treated by DTT or heparin was examined by measuring the head area at 1, 3 and 6 days. After measuring the area, each sample was exposed to a 5,400G static magnetic field generated by Nd-Fe-B permanent magnets for 24 hours at room temperature. Results showed that the sperms were separated into the head and the flagellum through the DTT treatment. Almost of the separated heads showed that their long axis oriented perpendicularly to the magnetic lines of force, and most of the long axis perpendicularly oriented heads showed that their flat plane oriented perpendicularly in a 5,400G magnetic field. Also, the demembranation of the head tended to increase those perpendicular orientations, while those perpendicular orientations of the head declined with the decondensation of the sperm nuclei. These findings suggest that strong magnetic anisotropy for the perpendicular orientation of the long axis and the flat plane of the head occurs in the sperm nuclei in a 5,400G magnetic field. The separated flagellum showed lower parallel orientation, and the separated and demembranated flagellum showed parallel orientation to the magnetic lines of force in this magnetic field. These findings suggest that weak magnetic anisotropy of the parallel orientation of the flagellum occurs in the inside components in a 5,400G field.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.357-377
• /
• 2000

A parallel communicating automata system is an accepting device based on the communications between more automata working in parallel. It consists of several automata corking independently but communicating with each other by request. We survey several variants of parallel communicating automata systems with respect to their computational power. Other aspects like decidability and complexity matters are also briefly discussed. Some open problem sand directions for future research are finally pointed out.

• 물과 미래
• /
• 제29권5호
• /
• pp.215-222
• /
• 1996

본 논문에서는 다공성 매질의 특수율이 비정체형인 경우 대수투수계수-수두 교차공분산에 관한 식을 유도하였으며, 이 교차공분산은 수두분포로부터 특수장의 통계학적 특성을 유추하는데(inverse problem) 매우 중요한 역할을 담당한다. 비정체형 대수투수계수는 일정한 선형경향과 정체형인 미소 변동의 합으로 구성되었으며, 2차원 포화대수층에서 정상 유동문제를 추계학적으로 해석하여 수두분포를 얻었고 이로부터 교차공분산을 유도하였다. 투수계수의 상관함수가 가우스분포를 가지고 그 경향이 수두 경사와 평행이거나 직교하는 두 가지 경우에 대하여 교차공분산을 살펴 본 결과, 투수장의 경향이 주 흐름방향과 평행한 경우 흐름방향 쪽만 제외하고는 정체형임이 밝혀졌다. 또한, 흐름방향과 직교하는 쪽으로의 교차공분산은 정체형 모델 결과와 달리 영이 아님를 알 수 있었다. 따라서 지하수 유동이나 오염물질 확산문제를 다룰 경우, 투수계수장에 어떤 경향이 존재한다고 의심될 때에는 반드시 그 경향을 해석과정에 포함시켜야 한다.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.47-54
• /
• 2017

This study examines the implementation of a kinematic machining tool to evaluate the interference and collision phenomenon of 5-axis machining of wing ribs from airplanes, particularly for a large-size model airplane. We develop a machine simulation model of a parallel kinematic machining tool that can operate in a virtual space, which is equivalent to the authentic conditions in the field. The investigation of the simulation function elements indicates the necessity to generate the 6-axis machining, which attaches an angle head to the main axis of the machine. Using an NC program for the wing ribs, we attempt to verify the correspondence and conformity between the machine simulation model and the actual equipment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권1호
• /
• pp.10-18
• /
• 2000

This paper describes the magnetic orientation of the intact and demembranated bull sperm treated by DTT or heparin in a 5,400 G static field. Semen samples collected from four bulls (Japanese Black) were mixed to the same sperm density. One percentage triton X-100 was used to extract the plasma membrane. The intact and demembranated sperm suspensions were treated with 20, 200, 2,000 mM DTT, 100, 1,000 or 10,000 units heparin solutions at $4{^{\circ}C}$ for 6 days. The decondensation of the sperm nuclei treated by DTT or heparin was examined by measuring the sperm head area at 1, 3, and 6 days. After measuring the area, each sperm sample was exposed to a 5,400 G static magnetic field generated by Nd-Fe-B permanent magnets for 24 hours at room temperature. Results showed that the decondensation of bull sperm nuclei was not induced by the heparin treatment, however, incomplete decondensation was induced by the DTT treatment. During the magnetic orientation, bull sperms treated by DTT or heparin had low percentages of long axis perpendicular to the magnetic lines of force. However, different aspects were obtained for long axis perpendicular orientations following treatment of DTT or heparin. Through the DTT treatment, the decline of long axis perpendicularly oriented percentages was due to the increase of long axis parallel orientation with the head of the flat plane perpendicular to the magnetic lines of force, whereas, using the heparin treatment, the decline of long axis perpendicular orientation was due to the increment of long axis parallel orientation with the head of the flat plane parallel to the magnetic lines of force. Also, percentages of the head of the flat plane perpendicular were decreased by the heparin treatment. These findings suggest that maintaining the structure of protamine in the chromatin is necessary for the sperm head to orient with its flat plane perpendicular, and maintaining the disulfide bond in the chromatin is necessary for the long axis of sperm to orient perpendicularly.

• 대한치과교정학회지
• /
• 제19권1호
• /
• pp.45-59
• /
• 1989

This study was undertaken to analyze the displacement and stress distribution in the mandible according to the pulling directions during mandibular first molar cervical traction after mandibular second molar extraction. The 3-dimensional finite element method(FEM) was used for a mathematical model composed of 594 elements and 1019 nodes. An orthodontic force, 450 gm, was applied to the each mandibular first molar in parallel, and below the occlusal plane by $7^{\circ}\;and\;25^{\circ}$ and meet the midsagittal plane by $40^{\circ}$ toward posterior direction. The results were as follows: 1. Mandibular teeth were displaced in more downward, posterior and lateral direction. Especially high stress was noted in case of parallel pull than in case of below the occlusal plane by $7^{\circ}\;and\;25^{\circ}$. 2. Mandibular first molar was moved bodily. 3. Generally, alveolar bone, mandibular body, ascending ramus and mandibular angle portion were displaced in downward, posterior and lateral direction. But coronoid process was displaced in downward, forward and lateral direction, and anterior and inner middle portion of condyle head and neck were displaced in downward, forward and medial direction, and posterior and outer middle portion of condyle head and neck were displaced in upward, forward and medial direction. 4. Maximum stress was observed at the condyle head and neck portion. With steeper direction of force, condyle head and neck showed more stress than parallel relation to the occlusal plane.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.111-116
• /
• 2001

In this paper, a simple 2 D.O.F. planar motion model is proposed in order to analyze the snake motion of a machining center cross head assembly, that is travelling on linear guide rails. In the proposed mathematical model, the friction between head and guide ways is neglected, and also the support structures including guide rails, rear- and side-panels of the machining center are assumed to be rigid. The equations of motion of the proposed model are derived and successfully solved to determine vibration responses of the head assembly due to some applied traction forces.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• 제61권11호
• /
• pp.624-629
• /
• 2018

Low-grade fibromyxoid sarcoma (LGFMS), a soft tissue tumor that has high recurrence and metastasizing potential, rarely occurs in the head and neck region. Therefore, the treatment for LGFMS in the facial area is challenging in terms of cosmetic and functional maintenance. The authors report a case of LGFMS in the posterior nasal cavity. It was completely removed in parallel with the nasal endoscopic and oral approach, but the lower margin was closed by preserving the soft palate. The patient is well without any recurrence or metastasis after 5 years of follow-up.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.114-121
• /
• 2000

입력 단 저장방식의 스위치는 최대 수율을 제한하는 HOL(Head-of-line) 블록킹이라는 단점을 지니고 있지만 구현의 간단함을 지닌다는 장점이 있다. 그러나 현재 VOQ(Virtual Output Queueing) 기술을 이용하면 입력 단 저장방식의 스위치에서 보이는 HOL 블록킹에서 완전히 벗어날 수 있어 간단한 구조로 높은 수율을 얻을 수 있게 된다. 본 논문에서 입력 단 저장방식의 ATM 스위치를 위한 새로운 셀 스케쥴링 알고리듬 PPIM(Probabilistic Parallel Iterative Matching)을 제안 한다. 제안된 새로운 알고리듬은 예약 대역폭에 비례하는 가중치를 각각의 입력-출력 링크에 부여함으로써, 기존의 PIM(Parallel Iterative Matching)이 제공하지 못하는 예약된 전송률 보장이 가능하게 한다. 이 알고리듬을 이용한 ATM 스위치는 높은 수율과 낮은 지연 값뿐만 아니라 지터 성능에 있어 기존의 WPIM(Weighted PIM)에 비해 더욱 향상된 성능을 보여준다.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.18-23
• /
• 2011

The hydraulic part in reactor coolant pump consists of suction nozzle, impeller, diffuser, and discharge nozzle. Among them, impeller is required to be designed to satisfy performance requirements such as head, NPSHR, and head curve slope at design point. Present study is intended to suggest the preliminary design method sizing the impeller size to satisfy the design requirement particularly including head curve slope at design point. On a basis of preliminary design result, hydraulic components have been designed in detail by CFD and then manufactured in a reduced scale. Experiment in parallel with computational analysis has been executed in order to confirm the hydraulic performance. Comparison results show good agreement with design result, confirming the validity of design method suggested in this study.