• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.1-7
• /
• 2012

Hanji made of mulberry fibers has the lower printability due to their long fiber length, the diffusible property of ink, and low smoothness. This study was carried out to analyze the physical and optical properties of machine-made Hanji controlled by the different contents of paper mulberry 20, 40, 60, 80 and 100%. In this study, the results of comparing machine-made Hanji controlled by the different contents of $Paper$ $mulberry$ with commercial paper and inkjet coated paper are as following: Tearing strength of machine-made Hanji is higher than domestic paper and inkjet coated paper. By increasing paper mulberry contents of machine-made Hanji appeared that tensile strength increased and smoothness gradually decreased. Printability of machine-made Hanji is less than domestic paper and inkjet coated paper. However, there were significant possibility to use for printing paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.52-58
• /
• 2013

To evaluate the anisotropic characteristics of Korean traditional paper-Hanji, the physical and mechanical characteristics of hand-made hanji, and machine-made hanji were investigated in this research. The densities of copying paper and newsprint paper appeared to be two times higher than the densities of hand-made hanji using Ssangbal sheet forming and hanji made of paper mulberry fiber. The breaking length, and tear index of both Hanji using Owangbal sheet forming, and hand-made Hanji using Ssangbal sheet forming appeared to be different according to the directions in paper. The breaking lengths of Hanji using Owangbal sheet forming showed little differences according to the directions. Breaking length of Hanji using Ssangbal sheet were slightly higher than those of Hanji using Owangbla sheet forming. The breaking lengths of machine-made hanji, copying paper, and newsprint paper were two to four times higher than those of hand-made Hanji. The breaking length showed higher differences according to the direction than the tear index. The tensile strength according to the directions in paper showed significant differences (${\alpha}$=0.05) in all papers used in this research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.1-8
• /
• 2013

Hanji has been used mainly for preservation paper because of superior mechanical properties. However, it was not used in printing for inkjet and laser printer-printed letters. In this study, machine-made Hanji was prepared with five different contents of paper mulberry 20, 40, 60, 80 and 100% and managed by same pressure calendering. By increasing of paper mulberry contents, tearing index and folding endurance of machine-made Hanji increased because of increased fiber-to-fiber bonding. Printability property of machine-made Hanji improved by decreasing of paper mulberry contents. After 20 hours accelerated aging, the initial folding endurance of machine-made Hanji was reduced by approximately one-fourth degree. Between 40 and 100% contents of paper mulberry was showed similar levels about preservation property. The machine-made Hanji of paper mulberry 60% content was suitable for permanence and printability properties using preservation paper and printer-printed letters.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.52-59
• /
• 2005

Most of printing paper market today have been occupied by western paper and some machine-made Hanji used don't show the characteristic advantages for traditional hand-made Hanji. Although hand-made Hanji has an aesthetic and qualitative value, it has limited uses because of poor printability as printing paper. Unlike western paper, conventional Hanji cannot be used as Printing paper because it is impossible to make the clear formation of printed dot and to develop a high level of sizing and picking problem occurs during printing. Improvements of physical and optical properties such as roughness, smoothness, air permeability, contact angle, opacity, and paper gloss as well as sizing level were accomplished through internal and surface sizing and calendering, which made the paper better suited for printing and decreased problems during printing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.4
• /
• pp.565-582
• /
• 2022

In recent years, Jumchi-Hanji made of mulberry paper is used as a material for fashion items. This study examined the effect of the type of Choji method (Oebal-teugi or Ssangbal-teugi), layer number (one or two layers) and Jumchichigi time (20, 40, or 60 minutes) on the tensile, wet tensile, tearing and bursting strengths of Jumchi-Hanji. Jumchi-Hanjis used as test samples in this study were made from mulbery paper which was manufactured with either bleached or unbleached paper mulberry from Thailand. The results showed that Jumchi-Hanji made with two layers of mulberry papers had higher strength properties than Jumchi-Hanji made with only one layer. The strength properties of Jumchi-Hanji also increased with longer Jumchichigi time. Furthermore, this study confirmed that the effects of Jumchichigi time on Jumchi-Hanji strengths differed based on the type of Choji method, the layer number of mulberry papers used, and the specific strength property measured. Therefore, to guarantee the strength properties required by the application of Jumchi-Hanji paper as a fashion material, it is necessary to carefully consider the adequate Choji method and layer number to apply in the manufacture of Thai mulberry paper and the adequate duration time needed to perform Jumchichigi to Thai mulbery paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1366-1375
• /
• 2008

This studies were carried out in order to develope environmentally-friendly fiber materials and substitute resources of Paper mulberry. Various plant fibers such as New Zealand flax, Indian mallow, Kuzu vine and Yucca were used as raw materials of hand-made papers. We rotted these 4 kinds of plant fibers and removed non-cellulose. After rotting, the pulping rate(%) and the length of fibers in pulps were measured. The physical characteristics of papers made of various plants fiber were investigated and the probabilities of practical use were considered. The results were as follow: The non-cellulose contents of plant fibers were $30{\sim}40%$ and those contents must be lower down to 8% to be able to manufacture the hand made papers. The lignin in pulps were removed almost and the hemicellulose were partially removed to reach up to appropriate level of the pulp rates and fiber lengths. The more hemicellulose removed, the finer fiber thickness were and rapidly the lower Hanji tensile strength were. But the tear strength of these plants of hand-made papers do not decreased so much as tensile strength. So the property of 4 types of plant fibers might be of great advantages to make hand-made papers. Both tensile and tear strengths of Hanji of New Zealand flax, Indian mallow, Kuzu vine and Yucca were higher than Paper mulberry hand-made paper. When 30% of mulberry paper were mixed, the mixing effect showed maximum. Because of the functions of all plant fiber hand-made papers showed better than those of Paper mulberry hand-made paper, 4 types of plant fibers could be substitute Paper mulberry.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.271-277
• /
• 2011

Hanji(Korean traditional paper) is made from bark of paper mulberry(Broussonetia kazinoki). For a long time, Hanji has been used in various fields, such as paintings, printing paper, as specialty paper. The utilization of Hanji will become more and more diverse. One of the characteristic properties of Hanji is a long life time comparing to western paper. The mucilage which must be used in Hanji manufacturing should effect the conservation properties of Hanji. The effectiveness of the mucilage in aging of Hanji was evaluated in this paper. Strength properties of thermal aged Hanji made with synthetic mucilage decreased more slowly than those of Hanji made with natural mucilage. As prolonged aging time, all Hanji made mucilage increased oxidation index. But, Hanji made with PAM was most stable in oxidation of cellulose.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.181-190
• /
• 2006

This study was conducted to develop dry forming technology and evaluate the properties of dry formed paper made from Hw-BKP. A dry forming mold (DFM) was developed to observe the phenomena of dry forming and evaluate the properties of formed papers. To upgrade the DFM a dry forming system (DFS) was developed. This DFS was designed to improve the formation of dry formed papers and enhance the productivity of dry forming. Dry forming gave papers with greater bulk and opacity than wet forming. Tensile strength of dry formed paper was greater than that of conventional wet formed handsheet when they were made from the same dry disintegrated fibers. But tensile strength of conventional wet formed handsheet made from beaten fiber was much greater than that of dry formed paper made from dry disintegrated fibers. When solvent dried beaten fibers were used in dry forming, the tensile strength of dry formed papers reached 73.5% of the wet formed handsheets made from beaten fiber. It showed that dry forming has a significant potential in improving strength properties when proper preparation of fibers and appropriate humidification, pressing, and drying processes are employed.

• Korean Journal of Remote Sensing
• /
• v.11 no.2
• /
• pp.43-57
• /
• 1995

This paper presents reconstruction of disparity in images. To achieve this, the algorithm was made up of two different procedures - one is extraction of boundaries for man-made structures and the other is matching of the structures. In the extraction of boundaries for man-made structures, we assume that man-made structures are composed of lines and the lines make up closed polygon. The convertional algorithms of the edges extraction may not perceive man-made structures and have problems that matching algorithms were too complex. This paper proposed sub-pixel boundaries extraction algorithm that fused split-and-merge and image improvement algorithms to overcome complexity. In matching procedure, feature-based algorithm that minimize the proposed cost function are used and the cost fuction considers movement of mid-points for left and right images to match structures. Because we could not obtain disparity of inner parts for the man-made structures, interpolation method was used. The experiment showed good results.