• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.1-11
• /
• 2022

In this paper, we investigate the requirements of QPA(Quality Process Audit), which is a process quality audit system for secondary defense contractors, compared with those of DQMS(Defense Quality Management System). And evaluate whether the deployment of QPA meets the DQMS certification requirements through the case example of Company H. The evaluation items of QPA are composed of five categories such as Material Management, Incoming Inspection, Manufacturing Process, Product Evaluation, and Packaging Management. The QPA requirements are mainly related to the chapter 7(support) and chapter 8(operation) of DQMS standards. In this view point, QPA can be expected as an effective audit for suppliers preparing for DQMS certification. In the case example, we evaluate the results and effects of improvement due to QPA and compare it with the case of DQMS. QPA can be used as appropriate quality management standards of secondary and tertiary defense contractors and can provide the basis guidelines for the preparation of implementation steps in DQMS certification.

• Structural Engineering and Mechanics
• /
• v.85 no.1
• /
• pp.119-133
• /
• 2023

Impact event is the key factor influencing the operational state of the mechanical equipment. Additionally, nonlinear factors existing in the complex mechanical equipment which are currently attracting more and more attention. Therefore, this paper proposes a novel hybrid-separate identification strategy to solve the force identification problem of the nonlinear structure under impact excitation. The 'hybrid' means that the identification strategy contains both l1-norm (sparse) and l2-norm regularization methods. The 'separate' means that the nonlinear response part only generated by nonlinear force needs to be separated from measured response. First, the state-of-the-art two-step iterative shrinkage/thresholding (TwIST) algorithm and sparse representation with the cubic B-spline function are developed to solve established normalized sparse regularization model to identify the accurate impact force and accurate peak value of the nonlinear force. Then, the identified impact force is substituted into the nonlinear response separation equation to obtain the nonlinear response part. Finally, a reduced transfer equation is established and solved by the classical Tikhonove regularization method to obtain the wave profile (variation trend) of the nonlinear force. Numerical and experimental identification results demonstrate that the novel hybrid-separate strategy can accurately and efficiently obtain the nonlinear force and impact force for the nonlinear structure.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.3
• /
• pp.143-153
• /
• 2023

This study examined the MZ Generation Consumers' perception and needs of HMR (Home Meal Replacement) using local food. The paper provides basic data for deriving a plan to promote local food consumption and reports the implications for various development and distribution strategies regarding HMR using local food. In this study, a quantitative survey was conducted targeting 600 consumers to examine the general consumption status of HMR using local food by MZ consumers. In addition, a qualitative survey was conducted targeting 21 people to derive the specific perceptions and unmet needs of MZ consumers. These results showed that MZ consumers require healthy and fresh HMR but have low awareness of HMR using local food. Therefore, it is necessary to deliver sufficient information and promote it. In particular, MZ consumers have high expectations for 'healthy and safe' food when purchasing HMR using local food, which plays an important role in purchasing decisions. They also valued 'convenience', which means 'simple cooking', 'subdivision packaging', and 'accessibility of purchasing channels', as important when purchasing HMR using local food. Lastly, MZ consumers positively evaluated the values of 'healthy eating' and 'revitalization of the local economy' through local food.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.111-117
• /
• 2019

This paper analyzes the unique consume psychology characteristics of the youth consumer groups, analyzes art collaboration in the cosmetics products design, and takes the cushion cosmetic product as example, and study the expression of art collaboration between the character image and the cosmetic products. The purpose of research is to improve the product value and brand image by analyzes the art collaboration of cosmetics product, In order to provide consumers with novel and personalized product experiences, and to make products more attractive to the youth consumer groups. It can be provided some reference and inspiration for the future direction of cosmetic packaging design for the youth consumer groups.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.43-47
• /
• 2016

This paper covers the study on the properties of $TiO_2$ film deposited by atomic layer deposition (ALD) using TTIP and water at various temperatures including the low temperature range of <$150^{\circ}C$. At low deposition temperature, ALD $TiO_2$ films showed uniform growth rate per cycle ($0.3{\AA}/cycle$), good uniformity, smooth surface, and homogenous amorphicity. They also showed good conformality of >80% on the trench structure with the high aspect ratio of up to 75. However, relatively high concentration of impurities (C~4-7 at%) in the film was observed due to low deposition temperature.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.37-39
• /
• 2001

21세기의 벽두부터 국내외적으로 활발히 논의되고 있는 나노기술에 대한 정의를 생각해보는 것으로부터 우리가 나아갈 방향을 살펴보고자 한다. 나노기술이란, 원자 하나 하나 혹은 분자단위의 조작을 통해 1~100nm정도의 범위 안에서 근본적으로 새로운 물질이나 구조체를 만들어 내는 기술을 말한다. 즉 앞으로 우리는 경험해 보지 못한 새로운 현상에 대한 이해를 할 수 있어야 하고, 새로운 물질 자체를 다룰 수 있는 방법이 우리가 해야 할 구체적인 일이 될 것이란 말이 된다. 뿐만 아니라 나노기술은 종래의 정보.통신.전자 분야에서 주로 추구하던 마이크로화와 달리 재료, 기계, 전자, 의학, 약학, 에너지, 환경, 화학, 생물학, 농학, 정보, 보안기술 등 과학기술 분야 전반을 위시하여 사회분야가지 새로운 인식과 철학적인 이해가 필요하게 되었다. 21세기를 맞은 인류가 나아갈 방향을 나노세계에 대한 도전으로 보아야 하며, 과학기술의 새로운 틀을 제공할 것 임에 틀림 없다. 그러나, 이와 같은 나노기술의 출발점을 살펴보면 VLSI기술로 통칭할 수 있는 마이크로전자소자 기술이란 점이다. 국내의 VLSI기술은 메모리기술이라고 해도 과언이 아닐 것이다. 문제는 종래의 메모리기술은 대규모 투자와 집중적인 인력양성을 통해서 세계 최고 수준에 도달 할 수 있었다. 그러나 여기까지 오는 동안 사식 우리는 선진국의 뒷꽁무니를 혼신의 힘을 다해 뒤쫓아 온 결과라고 보아도 틀리지 않는다. 즉, 앞선자를 보고 뒤쫓는 사람은 갈방향과 목표가 분명하므로 최선을 다하면 따라 잡을 수 있다. 그런데 나노기술은 앞선 사람이 없다는 점이 큰 차이이다 따라서 뒷껑무니를 쫓아가는 습성을 가지고는 개척해 나갈 수 없다는 점을 깨닫지 않으면 안된다. 그런 점에서 이 시간 나노기술의 국내외 현황을 살펴보고 우리가 어떻게 할 것인가를 생각해 보는데 의미가 있을 것이다.하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.(actual world)에서 가상 관성 세계(possible inertia would)로 변화시켜서, 완수동사의 종결점(ending point)을 현실세계에서 가상의 미래 세계로 움직이는 역할을 한다. 결과적으로, IMP는 완수동사의 닫힌 완료 관점을 현실세계에서는 열린 미완료 관점으로 변환시키되, 가상 관성 세계에서는 그대로 닫힌 관점으로 유지 시키는 효과를 가진다. 한국어와 영어의 관점 변환 구문의 차이는 각 언어의 지속부사구의 어휘 목록의 전제(presupposition)의 차이로 설명된다. 본 논문은 영어의 지속부사구는 논항의 하위간격This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.terpolation performance of CNN was relatively better than NN.콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2002

Polymer/ceramic composite is of great interest as a dielectric material for embedded capacitors. This paper is concerned in the effects of $BaTiO_3$ particle size on epoxy/$BaTiO_3$ composite films for embedded capacitors. 6 different size powders smaller than 1 $\mu\textrm{m}$ in diameter and bisphenol-A type epoxy were used for this experiment. Dielectric constant of the epoxy/$BaTiO_3$ composite capacitors increases as the powder size increases at the same powder loading, which is due to the increase of tetragonality of the powders as particle size increases. And leakage current of the capacitors also increases dramatically as the powder size increases. It was explained that this is due to the decrease of the number of $BaTiO_3$epoxy/$BaTiO_3$ potential barriers per unit length and, moreover, the enhancement of potential barrier lowering effects caused by increase of potential drop per one barrier. As a result, there is tradeoff between high dielectric constant and low leakage current in the epoxy/$BaTiO_3$ composite capacitors. So it is important to select proper size $BaTiO_3$ powders in accordance with needs.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.83-89
• /
• 2015

In this paper, we propose a fabrication technique for enhanced electrical properties of piezoelectric thick films with excellent patterning property using sol-infiltration and a direct-patterning process. To achieve the needs of high-density and direct-patterning at a low sintering temperature (< $850^{\circ}C$), a photosensitive lead zirconate titanate (PZT) solution was infiltrated into a screen-printed thick film. The direct-patterned PZT films were clearly formed on a locally screen-printed thick film, using a photomask and UV light. Because UV light is scattered in the screen-printed thick film of a porous powder-based structure, there are needs to optimize the photosensitive PZT sol infiltration process for obtaining the enhanced properties of PZT thick film. By optimizing the concentration of the photosensitive PZT sol, UV irradiation time, and solvent developing time, the hybrid films prepared with 0.35 M of PZT sol, 4 min of UV irradiation and 15 sec solvent developing time, showed a very dense with a large grain size at a low sintering temperature of $800^{\circ}C$. It also illustrated enhanced electrical properties (remnant polarization, $P_r$, and coercive field, $E_c$). The $P_r$ value was over four times higher than those of the screen-printed films. These films integrated on silicon wafer substrate could give a potential of applications in micro-sensors and -actuators.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.39-46
• /
• 2017

This paper presents the fabrication of ceramic insulation layer on metallic heat spreading substrate, i.e. an insulated metal substrate, for planar type heater. Aluminum alloy substrate is preferred as a heat spreading panel due to its high thermal conductivity, machinability and the light weight for the planar type heater which is used at the thermal treatment process of semiconductor device and display component manufacturing. An insulating layer made of ceramic dielectric film that is stable at high temperature has to be coated on the metallic substrate to form a heating element circuit. Two technical issues are raised at the forming of ceramic insulation layer on the metallic substrate; one is delamination and crack between metal and ceramic interface due to their large differences in thermal expansion coefficient, and the other is electrical breakdown due to intrinsic weakness in dielectric or structural defects. In this work, to overcome those problem, selected metal oxide buffer layers were introduced between metal and ceramic layer for mechanical matching, enhancing the adhesion strength, and multi-coating method was applied to improve the film quality and the dielectric breakdown property.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.35-40
• /
• 2018

Nd:YAG laser was used to carbonize polyimide films to produce carbon films. This is a simple manufacturing process to fabricate low cost sensors. By applying this method, we studied characteristics of flexible and low-cost piezoresistive. Previously, many studies focused on carbonization of polyimide using $CO_2$ laser with wavelength of $10.6{\mu}m$. In this paper, carbonization (carbonization process) was performed on polyimide films using an Nd:YAG laser with a wavelength of $1.064{\mu}m$. In order to increase the resolution, we optimized the laser conditions of the power density ($W/cm^2$) and the beam scan rate. In previous studies using $CO_2$ laser, the minimum line width was $140{\sim}220{\mu}m$ but in this study, carbon line width was reduced to $35{\sim}40{\mu}m$. The initial sheet resistance of the carbon sensor was $100{\sim}300{\Omega}/{\square}$. The resistance decreased by 30% under stretched with a curvature radius of 21 R. The calculated gauge factor was 56.6. This work offers a simple, highly flexible, and low-cost process to fabricate piezoresistive sensors.