• 자원환경지질
• /
• 제47권3호
• /
• pp.205-217
• /
• 2014

백두산 화산의 분화 가능성이 높아지면서, 백두산 화산 분화가 한반도를 비롯하여 지구촌에 미칠 사회경제적 영향에 대한 관심도 높아지고 있다. 백두산 화산이 분화할 경우 남한지역은 특히 화산재로 인한 직접 피해를 입게 되며, 이로 인한 2차 피해가 다양한 형태로 나타날 수 있다. 이에 이 연구는 백두산 화산 분화의 사회경제적 영향 평가에 있어 기초가 되는 직접 피해액 계산 방법을 고찰해 보고, 백두산 화산 분화 시나리오의 직접 피해액을 산정해 보고자 하였다. 직접 피해액 산정 방법으로는 재난 리스크 모델링 기술을 활용하였다. 현재까지 연구 결과에 의하면, 백두산 화산 분화 시 강원도 지역을 중심으로 화산재 피해를 입게 된다. 이에 강원도 지역을 중심으로 피해목적물 정보를 구축하였으며, 특히 강원도 전체 면적의 90% 이상을 차지하는 농업과 임업 분야를 중심으로 피해목적물 정보를 구축하고, 피해목적물별 손상함수를 정리하였다. 백두산 화산 분화 시나리오에 따른 화산재 두께 분포와 피해목적물의 공간 정보 및 자산 정보, 그리고 손상함수를 활용하여 피해액을 산출한 결과, 이 연구에서 참고한 겨울철 시나리오의 경우, 농업과 임업분야에서 각각 2,998억원(2010년 생산액의 20.4%)과 289억원(2010년 생산액의 9.0%)의 피해를 입는 것으로 나타났다. 농업분야에서 더 큰 피해를 입는 것을 알 수 있는데, 이 연구에 사용된 손상함수에 따르면, 농산물이 임산물보다 화산재에 더 취약하기 때문이다. 또한 강원도 지역은 농산물 생산액(2010년 기준 14,717억원)이 임산물 생산액(2010년 기준 3,223억원)보다 4.5배 이상 크다. 겨울철 시나리오의 경우, 피해액이 가장 큰 지역은 인제군, 강릉시 등으로 인제군은 비록 생산액은 많지 않으나 화산재 두께가 높이 쌓여(평균 8.5 mm) 큰 피해를 입힌 것으로 나타났다. 반면 고성군의 경우 20 mm 이상의 화산재 두께가 쌓이나 생산액이 적어 비교적 적은 피해를 보였다. 이와같이 산정된 직접 피해액은 투입산출모형과 같은 간접피해평가모형을 통해 간접 피해를 계산하는데 활용될 수 있다.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.149-156
• /
• 2018

This paper investigated the influence of binary and ternary blends of mineral admixtures in self-compacted mortar (SCM) on the fresh, mechanical and durability properties. For this purpose, 25 mortar mixtures were prepared having a total binder content of $640kg/cm^3$ and water/binder ratio between 0.41 and 0.50. All the mixtures consisted of Portland cement (PC), fly ash (FA) and silica fume (SF) as binary and ternary blends and air-entrained admixture wasn't used while control mixture contained only PC. The compressive and tensile strength tests were conducted for 28 and 91 days as well as slump-flow and V-funnel time tests whilst freeze-thaw (F-T) resistance and capillary water absorption tests were made for 91-day. Finally, in general, the use of SF with FA as ternary blends improved the tensile strength of mortars at 28- and 91-day while the use of SF15 with FA increased the compressive strength of the mortars compared to binary blends of FA. SCM mixtures with ternary blends had lower the sorptivity values than that of the mortars with binary blends of FA and the control mixture due to the beneficial properties of SF while the use of FA with SF as ternary blends induced the F-T resistance enhancement.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.97-103
• /
• 1993

두 개의 서로 다른 수문지질학적 성질을 갖는 다공성 매질이 대수층을 이룰 때, 수두분포를 적분방정식을 이용한 준해석적인 방법으로 구하는 방법을 연구하였다. 하단(下端)에서 지하수위(地下水位)의 위치가 알려져 있고, 하단(下端)에서의 경계조건이 일정수도 혹은 일정 유동량으로 주어질 때의 1차원 해석 알고리즘을 개발하고, 충적층(沖積層)(alluvium) 위에 석탄재(fly ash)를 매립하는 처분장의 경우에 적용하였다. 그 결과 얻어진 수두분포는 경계면 바로 윗부분에서 매우 큰 압력경사를 나타내었고, 이것이 수치해석을 어렵게 만드는 요인임을 발견하였다. 해석적으로 얻은 압력경사는 수치해석 수행시 격자(格子)의 배열을 어떻게 할 것인지에 대한 대안을 제시하였고, 그에 따른 수치해석 결과는 해석치와 근사함을 보였다.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권11호
• /
• pp.610-614
• /
• 2014

많은 과학 데이타처럼 화산재 확산 시뮬레이션 결과는 NetCDF 형식의 군집화된 희소행렬이다. 그리고 크기가 커서 저장과 전송에 많은 비용이 발생한다. 본 논문에서는 다차원 인덱스를 일차원으로 바꾸고 연속된 0을 그 시작점과 길이만을 기록하여 화산재 확산 시뮬레이션 데이터의 크기를 줄이는 방법을 제안한다. 이 방법은 기존의 ZIP 형식으로 압축한 것과 거의 같은 성능을 보이나 NetCDF의 구조는 손상하지 않는다. 제안된 방법에 의하면 데이터 크기가 줄어들어 저장공간의 효율이 높아지고 네트워크 전송시간이 줄어드는 효과를 기대할 수 있을 것이라 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.643-646
• /
• 2005

This paper reports the influence of super retarding agent(SRA) on the setting time of concrete incorporating mineral admixture including fly ash(FA), expansive additive(EA), silica fume(SF), blast furnace slag(BS) and blast furnace slag along with fly ash(BS+FA). An increase in SRA resulted in retarding the setting time of control concrete, while the use of mineral admixture led to a delay of setting time markedly, compared with that of control concrete under no SRA content. Meanwhile, An increase in SRA in concrete with mineral admixture exhibited comparable setting delay with control concrete. Furthermore, in case of the use of BS and SF, acceleration of setting time was observed with increase of SRA content. It is considered that proper dosage of SRA of concrete with SF and BS to secure similar setting delay with control concrete require rather larger than that of control concrete. Accordingly, For concrete with mineral admixture, in order to decide the proper dosage of SRA, application of correction factors is needed.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1181-1187
• /
• 2009

Results for application of RDF(Refuse Derived Fuel) to selected wastes in metropolitan and small and medium cities are as follows. The physical characteristics of waste are paper, plastic, food waste, and so on. The proximate analysis in P city showed 20.2% of moisture, 71% of combustible material, and 8.8% of ash on annual average. That in G city showed 31.6% of moisture, 59.5% of combustible material, and 8.9% of ash. Ultimate analysis in P city showed 52.04% of carbon, 7.02% of hydrogen, 28.80% of oxygen, 0.66% of nitrogen, and 0.09% of sulfur. Heating value was 3,363 kcal/kg. Ultimate analysis in G city showed 50.85% of carbon, 6.56% of hydrogen, 29.86% of oxygen, 0.79% of nitrogen, and 0.12% of sulfur. Heating value in the G city was somewhat lower than that in the P city with 2,632 kcal/kg. Thus, application of RDF in metropolitan city was more effective than that in small and medium cities. Heating value in mixture for the P city was lower than that in waste of the volume rate waste charge system alone by 143 kcal/kg. In proximate analysis, moisture, and combustible material were likely to be more adequate to RDF.

• Advances in materials Research
• /
• 제9권3호
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.358-364
• /
• 2009

This paper is to investigate the influence of driving patterns of slow and high speed vehicles on the performance of continuously regenerating diesel particulate filter(DPF) system matched with operating conditions in field application. The DPF performance test for field application was carried out for two identical DPFs installed to slow and high speed vehicles. A slow speed vehicle was selected among local buses which have driving patterns to repeat running and stop frequently, while a high speed vehicle was prepared to have long route of high speed over 60km/h like inter-city buses. In this test, the regeneration performance on the DPF of slow speed vehicle deteriorated because of high soot load index(SLI) in spite of same balance point temperature(BPT) distribution for high speed vehicle. The DPF of slow speed vehicle melted in the end because the rapid increase of back pressure caused high temperature over $1200^{\circ}C$ in the ceramic wall of DPF. The PM components like ash collected to the filter in the DPF were analyzed in order to investigate the cause of the defect and provide an operation performance of DPF system. In the result of the analysis, high levels of lubrication oil ash(Ca, Mg, P, Zn) were detected.

• 한국해양학회지
• /
• 제10권1호
• /
• pp.17-24
• /
• 1975

In order to clarify the accumulation of radioactive materials in marine organisms of Korea, the present investigation is carried out with 54 samples of edible seaweeds collected from eight sampling sites along the coast of Korea during September, 1973 and April, 1974. In this paper, ash contents, gross alpha activities and gross beta activities are detected. The ash content is 7.53- 15.95% in the species investigated. Among the algal phyla it is about 13.13% in green algae, 12.77% in brown algae, and 10.77% in red algae on an average. On the other hand, gross alpha activities fluctuate from 180.0 pCi/Kg to 1082.6 pCi /Kg-fresh material experimented, and are 530.72 pCi/Kg on an average. They increase from green to red and brown algae, in turn. The activities in a single species collected at the same season increse from eastern to western and southern coasts of Korea, in turn. Gross beta activities, however, fluctuate from 2.40 nCi/Kg to 22.14 nCi/Kg-fresh material experimented, and 9.03 nCi/Kg on an average. They increase also from green to red nd brown algae, in turn. The gross beta activities are specially higher in Sargassum thunbergii, 22.14 nCi/Kg It is expected that this plant could be an indicator to detect the activities in the marine algae along the coast of Korea.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.