• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1359-1360
• /
• 2007

In this paper, it is described the characteristics comparison of LV insulated materials contaminated by the salt vaporization and the particulates. The contact angle of normal PVC is measured $75^{\circ}$ but its of PVC contaminated by the salt vaporization for 500 hours is measured $63^{\circ}$. The contact angle of normal bakelite is measured $66^{\circ}$ but its of bakelite contaminated by the salt vaporization for 500 hours is measured $44^{\circ}$. And the contact angle of normal acrylic resin is measured $65^{\circ}$ but its of acrylic resin contaminated by the salt vaporization for 500 hours is measured $60^{\circ}$. In the surface of insulated materials contaminated by the particulate, the contact angle is decreased. The surface of bakelite is not good as an insulator.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.814-817
• /
• 2004

Deterioration due to de-icer salt occurs in practice in concrete pavement, dike, barrier and similar structure. This paper reports the results of effect of de-icer salt on. durability of concrete structure in winter. To protect concrete structure from damage by de-icer salt in winter, the exposure test was performed using three countermeasures such as increase in design strength upto $350kg/cm^2$, application of ggbf slag powder, and concrete sealer. Of these, the method of increase in design strength upto $350kg/cm^2$ showed better durability for deterioration by de-icer salt.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.130-135
• /
• 2001

In this paper, the distribution characteristics of salt contaminants with the distance from sea in East coast, from Sokcho to Pusan of Korea peninsula were investigated to evaluate the design standard of KEPCO. To get the equivalent salt deposit density(ESDD), conventional brush wiping method was used. As the measuring period is comparatively short, and the measuring interval is long to check the maximum value, acquired ESDD data is very lower than the recommended value in the standard. The measured data didn't follow normal distribution, so it should take the statistical treatment. Through normalizing method, we could get a reliable probability data. In the past investigation, the accumulation characteristics of Japan is consulted to set the criterion, but the climatic condition of Korea is different to Japan. With the comparison of precipitation data and some measured data for long tern accumulation, we could set appropriate accumulation factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.179-181
• /
• 2018

Digital imaging equipment is used for a variety of purposes in a wide range of fields in society and is becoming an important element of the 4th industrial revolution. Imaging equipment data is exposed to noise from various causes, and this noise affects accuracy of the equipment, causing errors and lowering reliability. In the present paper, an algorithm based on directional effective pixels is proposed to effectively remove high-density Salt and Pepper noise. Conventional methods show that performance decreases as Salt and Pepper noise density increases. To the contrary, the proposed method has noise-removal performance superior to those of conventional methods, by performing de-noising which considers directional effective pixels even in a high-density Salt and Pepper noise environment. Experimental results show that the proposed algorithm is superior to the existing methods, and performance is verified through enlarged images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.343-345
• /
• 2017

In digital era image processing has been utilized in a variety of media such as TV, camera and smart phone. However, in the process of analyzing, recognizing, and processing image data, deterioration occurs due to various causes and Salt & Pepper noise occurs. Typical methods for removing such noise include SMF, CWMF, and SWMF. However, existing methods have a somewhat poor noise canceling characteristic in Salt & Pepper noise environment. Therefore, in this paper, we propose an algorithm to remove Salt & Pepper noise effectively by using bilinear interpolation method and median filter according to noise density of local mask. And using the PSNR(Peak Signal to Noise Ratio) it compared to the existing methods and their performance in order to determine the performance of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.927-929
• /
• 2015

With rapid progress in digital technology, demand for multi-media imaging devices is increasing. But noise occurs due to various reasons during the process of acquiring, transmitting or processing the image data. Filters used to remove salt and pepper noise include CWMF and AWMF. In areas where the noise density is high, the removal of noise is undermined. This paper suggests an algorithm that preserves the edge while removing noise using spatial weighted.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2019

Recently, modern society has come up with the importance of video processing as various imaging systems have developed. However, deterioration occurs in the process of transmitting, processing, and storing video data for various reasons. Deterioration will damage the original image, and the typical noise is Salt and Pepper noise. There are A-TMF, CWMF, and linear interpolation as the means to eliminate Salt and Pepper noise. However, these methods show somewhat poor noise abatement performance in high-density noise areas. Therefore, this paper proposes an algorithm to eliminate noise using modified linear interpolation. To prove the validity of the proposed algorithm, PSNR, Profile was used to compare it with existing methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.932-935
• /
• 2015

Recently, the image system is utilized in several fields due to the development of multimedia technology. However, the noise occurs according to various causes in the process of image data processing. The noises added to the image include several types according to the cause and shape, and the salt and pepper noise is one of the typical noise types. Thus, this paper proposed the median filter algorithm using the estimated mask in order to remove the salt and pepper noise effectively and also compared this algorithm with the current methods using PSNR(peak signal to noise ratio) as a criterion of judgment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1973-1980
• /
• 2014

Edge detection for such as image, lane and object recognition is important image processing method. And some traditional method for this, there are Sobel, Prewitt, Roberts, Laplacian, LoG(Laplacian of Gaussian) and so on. Characteristics of these methods are insufficient in the salt & pepper noise added image. In order to improve such a problem of conventional methods, in this paper, we proposed an algorithm applying the weighted mask for detecting an edge by setting the local mask centered on the adjacent of the central pixel if central pixel of the mask is non-noise, it is intactly set by element of estimated mask, after calculating estimated mask if it is noise.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.799-807
• /
• 2020

This paper deals with identification of probabilistic design using reliability based robust optimization in structure design of automatic salt collector. The thickness sizing variables of main structure member in the automatic salt collector were considered the random design variables including the uncertainty of corrosion that would be an inevitable hazardousness in the saltern work environment. The probabilistic constraint functions were selected from the strength performances of the automatic salt collector. The reliability based robust optimum design problem was formulated such that the random design variables were determined by minimizing the weight of the automatic salt collector subject to the probabilistic strength performance constraints evaluating from reliability analysis. Mean value reliability method and adaptive importance sampling method were applied to the reliability evaluation in the reliability based robust optimization. The three sigma level quality was considered robustness in side constraints. The probabilistic optimum design results according to the reliability analysis methods were compared to deterministic optimum design results. The reliability based robust optimization using the mean value reliability method showed the most rational results for the probabilistic optimum structure design of the automatic salt collector.