• Journal of the Chungcheong Mathematical Society
• /
• v.13 no.2
• /
• pp.19-27
• /
• 2001

In this paper we study another kind of the large deviation property, i.e. moderate deviation type for random amount of random measures on $R^d$ about a Poisson point process and a Poisson center cluster random measure.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.119-130
• /
• 1998

As a satellite positioning system, GPS is designed to provide the information on three dimensional position, velocity, and time all over the world. The purpose of this paper is to obtain what day has the best accuracy and what time has the best accuracy of measuring of forteen-twenty mimutes for effective using of MAGELLAN G.P.S NAV DLX-10 system. The result of measurement maximum deviation value from November, 1997 to March, 1998 that latitude deviation is 3' .75 and longitude deviation is 2' .1 And the result of measurement maximum deviation value during fourteen minutes of April 29, 1998 that latitude deviation is 3' .75 and longitude deviation is 1' .9. The result of measurement maximum deviation value during twenty minutes of May 6, 1998 that latitude deviation is 4' .75 and longitude deviation is 2' .1 and that is provid 3' .25, 4' .1 to May 13, 1998. So, we expect efficient use of horizontal position for navigation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.116.3-116
• /
• 2001

A diagnosis methodology for thickness quality in hot finishing mill is proposed based on multivariate statistical analysis. The thickness of hot strip is a key quality factor that is measured by x-ray thickness gauge. Currently, the thickness quality is guaranteed by upper and lower limit of thickness deviation from target thickness. But if any over-limit is occurred, there is no in-line method to identify the causes. In this paper, many parameters are extracted from the thickness deviation signal such as mean deviation(top, middle, tail), rms deviation(top, middle, tail) and peak deviation(top, middle, tail) as time domain parameters ...

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.3
• /
• pp.205-210
• /
• 2006

Curve tessellation, which generates a sequence of points from a curve, is very important for curves rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal chordal deviation on a curve segment. In the previous research a curve tessellation was tried by the subdivision method, that is, a curve is subdivided until the maximal chordal deviation is less than the given tolerance. On the other hand, a curve tessellation by sequential method is tried in this paper, that is, points are generated successively by using the local property of a curve. The sequential method generates relatively much less points than the subdivision method. Besides, the sequential method can generate a sequence of points from a spatial curve by approximation to a planar curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1866-1878
• /
• 2018

This paper presents a neutral point deviation and ripple compensation control method for application to 3-level NPC converters. The neutral point deviation and its harmonic components are analyzed with a focus on the average current flowing through the neutral point of the dc-link. This paper also proposes a control scheme to compensate for the neutral point deviation and dominant harmonic components under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converters. Simulation and experimental results are presented to verify the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.177-178
• /
• 2015

This paper presents a neutral point deviation compensating control algorithm applied to a 3-level NPC converter. The neutral point deviation is analyzed with a focus on the current flowing out of or into the neutral point of the dc link. Based on the zero sequence components of the reference voltages, this paper analyzes the neutral point deviation and balancing control for 3-level NPC converter. An analytical method is proposed to calculate the injected zero sequence voltage for NP balancing based on average neutral current. This paper also proposes a control scheme compensating for the neutral point deviation under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converter. Simulation and experimental results for a test set up of 30kW are shown to verify the validity of the proposed algorithm.

• Korean Journal of Bronchoesophagology
• /
• v.16 no.2
• /
• pp.138-144
• /
• 2010

Background: Tracheal deviations are encountered frequently in head and neck tumors especially in thyroid cancer. Dyspnea and stridor are symptom calling for surgery. The method of evaluation in tracheal deviation is not well established yet. This paper is aimed to suggest objective tools to evaluate tracheal deviation in relation to cervical vertebra. Material and Method: Ten cases of thyroid cancers were recruited retrospectively. Tracheal inner shadow and shape of cervical vertebra were reconstructed three dimensionally using 3D-doctor to compare position of trachea in relation to vertebral body. Extent of deviation was scored in relation to both lateral borders of vertebral body. Angles between trachea and spinous process were measured in axial CT and compared between study group and control group. Results: Deviation scores were statistically significant between study group (mean=1.1) and control group (mean=0) (p=0.0008). Deviation angles at maximal tumor size in study group (mean=160.3 Degrees) and deviation angles of control group (mean=177.1 Degrees) were statistically significant (p=0.0007). Angles at maximal deviation of three dimensional images ages in study group (mean=162.6 Degrees) and deviation angles of control group (mean=177.1 Degrees) were statistically significant (p=0.0089). Conclusion: Tracheal deviation can be evaluated using scoring of three dimensional images and measuring angle between trachea and vertebral spine.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.450-457
• /
• 2000

This paper establishes a scheme to estimate track quality using standard deviation and deterioration rate of track irregularities. To provide index of quality, standard deviation and deterioration rate of track irregularities are analyed. As an index, standard deviation and deterioration rate were applied to decision of corrective maintenance and replacement maintenance, respectively. Further, this paper proposes a basic scheme for a modernization of mechanize track maintenance that using MTT(Multiple Tie Tamper) and Ballast Cleaner.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2019

Bucket trajectory is crucial regarding precision work with an excavator. In general, the bucket trajectory deviation is determined by the machining deviation of the frame, driving deviation of the driving hydraulic cylinder, clearance in the joints, and deformation of the structure. This paper investigated the relationship between the respective clearance in joints and the trajectory deviation of the bucket at the finishing work of the ditching for a 20-ton excavator. As a result, the larger the clearance, the larger deviation is increased at trajectory. However, it was found that the deviation of the rotation angle and displacement of the bucket was limited and the size of clearance does not affect closely on the contact angle of the pin shaft.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.649-656
• /
• 2005

In this paper we consider a fuzzy least absolute deviation method in order to construct fuzzy linear regression model with fuzzy input and fuzzy output. We also consider two numerical examples to evaluate an effectiveness of the fuzzy least absolute deviation method and the fuzzy least squares method.