• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.23-31
• /
• 2020

This paper investigates the impact of monetary policy independence shock on bond yield by allowing for heterogeneous coefficients in the model based on panel data for 19 developing countries using quarterly data from 1991 to 2016. First, we estimate the model using conventional panel VAR estimation with the assumption of homogeneous coefficients across countries. Second, by performing Chow and Roy-Zellner tests to check the homogeneity assumption, we find that the assumption does not hold in the model. Third, we apply a mean-group estimation for panel VAR as a solution for heterogeneity panel model. The results reveal that central bank independence is effective in reducing bond yield with the maximum at period 6 after the shock. Shock one standard deviation bond yield has a negative effect on consumption and investment. We determine that central bank independence has a contradictory effect on real activity; a negative effect on consumption but a positive influence on investment for the first two years after the shock. Additionally, we split our sample into three groups to make the subgroups pool. Our empirical result shows that monetary policy independence shock reduces bond yield. Meanwhile, the response of economic activity to bond yield varies for all three groups.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.63-75
• /
• 2000

Stated Preference (SP) data has been regarded as more useful than Revealed Preference (RP) data, because researchers can investigate the respondents\` Preference and attitude for a traffic condition or a new traffic system by using the SP data. However, the SP data has two bias: the first one is the bias inherent in SP data and the latter one is the attrition bias in SP panel data. If the biases do not corrected, the choice model using SP data may predict a erroneous future demand. In this Paper, six route choice models are constructed to deal with the SP biases, and. these six models are classified into cross-sectional models (model I∼IH) and dynamic models (model IV∼VI) From the six models. some remarkable results are obtained. The cross-sectional model that incorporate RP choice results of responders with SP cross-sectional model can correct the biases inherent in SP data, and also the dynamic models can consider the temporal variations of the effectiveness of state dependence in SP responses by assuming a simple exponential function of the state dependence. WESML method that use the estimated attrition probability is also adopted to correct the attrition bias in SP Panel data. The results can be contributed to the dynamic modeling of SP Panel data and also useful to predict more exact demand.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• Asia-Pacific Journal of Business
• /
• v.11 no.2
• /
• pp.27-43
• /
• 2020

Purpose - This study explores the impact of the real estate industry on related industries for the perspective of Chinese steel companies. Design/methodology/approach - The impact of housing prices on the 41 listed steel companies' performance was analyzed by using the panel data model. We used two kinds of housing price indexes that are set in the panel data models to estimate the range of the real estate market, driving the performance growth of steel listed companies. Moreover, the net profit of steel companies is used as the dependent variable. To test the stability of the model, ROA used as a dependent variable for the robustness test. Also, to avoid the time trend of housing prices, this paper selects the growth rate of housing prices as the primary research variable. After Fisher-type testings, there is no unit root problem in both independent and dependent variables. Findings - The results indicated that the rise in the housing price has a positive influence on the steel company performance. When the housing price increases by 1%, the net profit of steel enterprises will increase by 5 to 20 million yuan. Research implications or Originality - In this paper, empirical data at the micro-level and panel model are used to quantify China's real estate industry's driving effect on the iron and steel industry, providing evidence from the microdata level. It helps us to understand further the status and role of China's real estate industry in the economic structure.

• International Commerce and Information Review
• /
• v.11 no.2
• /
• pp.111-126
• /
• 2009

This study analysed determinants of Foreign Direct Investment to ASEAN+ 3 member nations using panel data for which cross-sectional data are combined with time series data. The data for the analysis included the amount of FDI, GDP, and indexes of economic independence. This study collected data from six nations(Indonesia, Malaysia, Philippines, Singapore, Thailand, Vietnam) whose data were easily available, China and Japan from 2003 to 2007 and analysed them. The results are summarized as follows: Using the pooled OLS method, we found Model 2 had the highest explanatory power whose adjusted R-squared was 89.4%, which accounted for about 89% of foreign investment. Using the fixed effect model, Model 2 had the highest explanatory power whose adjusted R-squared was 96.8%, which accounted for about 97% of foreign investment. Using the probability effect model, Model 5 had the highest explanatory power, but in respect to its statistical significance, only GDP was 1% significant and the rest variables had no significance.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.2
• /
• pp.157-167
• /
• 2006

Estimating the effects of price increase on a company's sales is important task faced by managers. If consumer has prior information on price increase or expects it, there would be stockpiling and subsequent drops in sales. In addition, consumer can suppress demand in the short run. These factors make the sales dynamic and unstable. In this paper we develop a time series model to evaluate the sales patterns with stockpiling and short-term suppression of demand and also propose a forecasting procedure. For estimation, we use panel data and extend the model to Bayesian hierarchical structure. By borrowing strength across cross-sectional units, this estimation scheme gives more robust and reasonable result than one from the individual estimation. Furthermore, the proposed scheme yields improved predictive power in the forecasting of hold-out sample periods.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.123-132
• /
• 2016

We can achieve the principle of parsimony and efficiency if homogeneity for panel time series model is satisfied. We suggest a Rao test statistic and a Wald test statistic for the test of homogeneity for panel AR(1) and derived the limit distribution. We performed a simulation to examine statistics with the same chisquare distribution when number of the individual is small and in common with large. We also simulated to compare the empirical power of the statistics in a small panel. In application, we fit panel AR(1) model using regional monthly economical active population data and test homogeneity for panel AR(1). It is satisfied homogeneity, so it could be fitted AR(1) using the sample mean at the time point. We also compare the power of prediction between each individual and pooled model.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.129-140
• /
• 2002

This paper develops a dynamic structural equation model, which captures relationships among socio-demographics, activity participation(i.e., time use) and travel behavior in consideration with time variation effects. The data used in developing the model are two waves(the year 1991 and 1992) from Puget Sound Transportation Panel (PSTP). which is surveyed in Puget Sound Region in United States. The PSTP is widely used in transportation behavior analysis and includes various information of traveler's socio-economic, travel patterns, and activity participation. In the model, we use 10 endogenous variables including activity participations and travel behaviors and 10 exogenous variables composed of time variant and invariant traveler's socio-demographic variables. The empirical model shows that strong relationships exist not only between socio-demographics and travel behavior, but between waves. We also confirm needs of panel data set to identify and understand time variation effects and travel behaviors.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.11a
• /
• pp.167-173
• /
• 2005

This paper presents an autocorrelation test that is applicable to dynamic panel data models with serially correlated errors. The residual-based GMM t-test is a significance test that is applied after estimating a dynamic model by using the instrumental variable(IV) method and is directly applicable to any other consistently estimated residuals. Monte Carlo simulations show that the t-test has considerably more power than the $m_2$ test or the Sargan test under both forms of serial correlation (i.e., AR(1) and MA(1)).

• Journal of the Korean Statistical Society
• /
• v.34 no.4
• /
• pp.367-375
• /
• 2005

This paper presents an autocorrelation test that is applicable to dynamic panel data models with serially correlated errors. The residual-based GMM t-test is a significance test that is applied after estimating a dynamic model by using the instrumental variable (IV) method and is directly applicable to any other consistently estimated residuals. Monte Carlo simulations show that the t-test has considerably more power than the $m_2$ test or the Sargan test under both forms of serial correlation (i.e., AR(1) and MA(1)).