• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.566-571
• /
• 2007

In this study, it is investigated the thermal post-buckling characteristics of step-formed FG panel under the heat and supersonic flow. Material properties are assumed to be temperature dependent as well as continuously varying in the thickness direction of the panel according to a simple power law distribution in terms of the volume fraction of the constituent. First-order shear deformation theory(FSDT) of plate is applied to model the panel, and the von Karman strain-displacement relations are adopted to consider the geometric nonlinearity due to large deformation. Also, the first-order piston theory is used to model the supersonic aerodynamic load acting on a panel. Numerical results are summarized to reveal the thermal post-buckling behaviors of FG panels with various volume fractions, temperature conditions and aerodynamic pressures in detail.

• 소음진동
• /
• 제9권4호
• /
• pp.785-794
• /
• 1999

The panel contribution analysis to reduce interior booming noise of a passenger car is carried out using both experimental method and numerical one. The accelerations of panels are measured on the outer surface of car body during operation. The acoustic characteristic of cavity is represented by two different ways. One is the acoustic transfer function obtained by experiment with reciprocal manner. The other is the boundary element model and numerical results of the model are calculated using SYSNOISE. The results from numerical method show more good agreement with measured sound pressure levels than the experimental one. Contributions of panels for interior noise are ranked and structure of the car is reinforced according to the results, which shows that the panel contribution analysis is a powerful tool to lessen structure-borne noise of passenger vehicle.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.85-92
• /
• 2006

본 연구에서는 철근콘크리트 프리캐스트 대형판의 접합부 설계방법 및 해석방법에 대해서 연구를 수행하였다. 접합부의 설계방법은 수평접합부와 수직접합부의 구조적 거동에 대한 안정성 및 일체성을 확보하기 위한 설계법을 제시하였고, 접합부의 해석은 강체스프링 모델에 의한 탄소성해석을 수행 하였다.

• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.691-699
• /
• 2022

This paper is devoted to the presentation of a numerical study on vibration behavior of composite panels reinforced by glass fibres and carbon nanotubes (CNTs) subjected to thermal environments. The effect of temperature variation has been included as thermal load acting on in-plane direction of the panel. To model the composite material, a micromechanical model which contains random dispersion of nanotubes and single-direction fibers has been selected. The geometry of the panel has been considered to have a single curveture along its width. Based on the above assumptions, the governing equations have been derived by using thin shell theory capturing the panel curveture and also nonlinear deflections. Finally, the panel dependence on various factors such as the curveture, nanotube amount, fiber volume, fiber direction and temperature variation has been researched.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.356-363
• /
• 2016

Purpose: The purpose of this study is to propose efficiency of equipment testing the luminance degradation of OLED. Methods: The degradation model of Exponential model and Stretched exponential model is analyzed by goodness of fit test using calculated R-square. The degradation model having the higher R-square is finally selected. Scale parameter and Shape parameter using the selected degradation model is estimated. The activation energy and current density n using peck model among the accelerated model is estimated. the estimated parameters are analyzed by t-test. Results: The results of t-test show that the estimated parameters on chamber and hotplate are equal statistically. we can know the similarity of the luminance degradation rate and degradation pattern on chamber and hotplate. Conclusion: The result of the degradation test on chamber and hotplate is similar. when the accelerated degradation test on the panel of the OLED TV is performed, hotplate is requiring less samples, time and cost than chamber. so the accelerated degradation test on the panel of the OLED TV using the hoplate is efficient of time and cost.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.131-134
• /
• 2001

The three-dimensional precision measurement technology for industry product of middle and/or large scale has been developed. Theodolite measurement system which is one of the technology is widely used in aerospace industry. This paper describes measurement method and results for spacecraft structure test model by using the measurement system. And structural stability for STM is desribed through the comparison between design values and measured values.

• 한국농공학회논문집
• /
• 제64권2호
• /
• pp.1-13
• /
• 2022

Agrivoltaic facility is the composite system that the solar panel is installed above the farmland, and it enables crop and electricity production simultaneously. Solar panels of the agrivoltaic facilities can block and reduce the amount of solar irradiance arriving at the farmland, but it can help the crop growth by preventing excessive solar irradiance. Therefore, to clarify how the agrivoltaic facilities affect the crop growth, precise solar irradiance distribution under the solar panel should be modeled. In this study, PAR (photosynthetically active radiation), radiation from 400 to 700 nm, which crops usually use to grow, was extracted from the total irradiance and its distribution model under various conditions was developed. Monthly irradiance distributions varied because the elevation of the sun was changed over time, which made the position changed that the local maximum and minimum irradiance appear. The higher panel height did not cause any significant difference in the amount of irradiance reaching below the solar panel, but its distribution became more uniform. Furthermore, the panel angles with the most irradiance arriving below the solar panel were different by month, but its difference was up to 2%p between the irradiance with 30° angle which is usually recommended in Korea. Finally, the interval between panels was adjusted; when the ratio of the length of the panel to the empty space was 1:2, the irradiance of 0.719 times was reached compared to when there was no panel, 0.579 times for 1:1 and 0.442 times for 2:1.

• 국제지역연구
• /
• 제16권1호
• /
• pp.3-27
• /
• 2012

본 연구는 패널 공적분 검정 그리고 비교적 최근에 개발된 패널 단위근 검정을 이용하여 지역 주택가격과 지역총생산 간의 장기관계를 분석하였다. 횡단면 의존성(cross-section dependence)이 확인된 경우, 이를 고려한 Pesaran의 CIPS 패널 단위근 검정을 이용하였다. 기존 패널 단위근 검정의 결과와 다르게 CIPS 검정은 변수들이 불안정성을 갖는 것으로 나타났다. 또한 패널 벡터오차수정모형(VECM)을 이용하여 변수들 간의 인과관계를 확인하였으며, 고정효과모형(Fixed effect)과 패널 자기회귀시차(ARDL)모형을 이용하여 계수들의 장기관계를 구체적으로 추정하였다. 먼저 변수들 간에 공적분관계가 형성되며 장 단기 인과관계가 성립하는 것으로 나타났다. 또한 VECM 모형의 오차수정항은 통계적으로 유의한 것으로 나타나 변수들 간의 장기 공적분 관계를 뒷받침하고 있다. 모형의 추정 결과, 장기적으로 주택가격의 상승은 지역총생산을 증가시키며 반대의 관계도 성립함을 알 수 있다. 이 결과에 의해 우리나라 지역 주택시장에서 부의 효과(wealth effect)가 존재하고 있는 것으로 나타났다. 이러한 결과들과 함께 오차수정항으로부터, 주택 가격과 경제 변수들은 단기적으로는 일시적인 균형상태로부터 이탈될 수 있지만, 장기적으로는 이들 변수는 균형관계에 있다는 것을 의미한다.

• 컴퓨터교육학회논문지
• /
• 제17권6호
• /
• pp.103-113
• /
• 2014

본 연구에서는 동적 다변량 그래프 데이터의 연속적 분석이 가능한 질의 모델을 설계 및 구현하였다. 먼저, 질의 모델을 판별함수 설정과 시간에 따른 통합 방법 선택의 두 단계로 설계하고, 질의 패널, 그래프 시각화 패널, 속성 패널로 구성된 질의 시스템으로 구현하였다. 또한, 그래프 표현에는 노드-링크 다이어그램과 Force-Directed Graph Drawing 알고리즘을 이용하였으며, 질의 결과로 선택된 대상들에 효과를 적용하여 사용자가 시각적으로 구분할 수 있도록 처리하였다. 마지막으로, 세계 소형 무기 거래량 데이터를 이용하여, 본 연구에서 설계한 동적 다변량 그래프 질의 모델을 검증하였다. 본 연구는 동적 그래프의 연속적 분석이 가능한 새로운 질의 모델을 설계하는 것을 통해, 기존 모델이 동적 그래프를 시점별로 이산적으로만 분석할 수 있는 한계를 개선하였다는데 의의가 있다. 본 연구는 추세 분석이나, 복잡계 네트워크 해석 등 동적 그래프를 사용하는 연구에 기여할 수 있을 것으로 기대된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.348-363
• /
• 2013

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.