• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.75-83
• /
• 2019

In order to fulfill the obligation to voluntarily reduce greenhouse gas emissions under the Paris Climate Agreement, the proportion of coal and nuclear power generation is reduced worldwide and national efforts are being made to spread renewable energy including solar power generation. Korea also intends to increase the proportion of renewable energy generation to 30~35% by 2040 by introducing laws and regulations. In addition, while the country is trying to apply solar power generation to sidewalks and roads, there is no research related to it in Korea. Therefore, as a precedent study to develop solar power generation roads, solar power generation concrete blocks applicable to sidewalks and plazas were developed and the applicability was evaluated by constructing them on the site. As a result of indoor experiment, compressive strength was measured by 25.5~35.7MPa and flexural strength was measured by 5.1~10.5MPa, which showed that all domestic standards were satisfied. However, the higher the unit cement amount, the lower the strength was measured according to the mixing of the broken fine aggregate. The absorption rate was 5.7%, which satisfied the domestic standard of 7% or less. As a result of the freeze-thawing test, the reduction rate of the compressive strength after 100 cycles was up to 6.3%. As a result of measuring the settlement amount after construction, the maximum of 2.498mm was measured and irregular settlement occurred in the overall area, which is because the resolution of the sand layer was poor during construction. Maintenance techniques of sidewalk concrete block and solar panel need to be established more efficiently through long-term operation in the further.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.61-68
• /
• 2019

As the pollution of water resources deteriorates due to industrialization and urbanization, it is difficult to supply clean water through a water treatment method using chlorine. Therefore, the introduction of advanced water treatment facilities using ozone is on the increase. However, epoxy which is used as waterproofing and anticorrosives and stainless steel used in conventional waterproofing and anti-corrosive methods have deteriorated because of the strong oxidizing power of ozone, causing problems such as leaking. Moreover, it even causes the durability degradation of a concrete. Therefore, in this study, metal spraying system was used as the means of constructing a metal panel with excellent ozone resistance and chemical resistance which is an easier method than an existing construction method. Ozone resistance was evaluated in accordance with the type of metal sprayed coatings to develop a finishing method which can prevent the concrete structure of water treatment facilities from deterioration. Furthermore, electrochemical stability in actual sewage treatment plant environment was evaluated. Experimental results showed that Ti has superior ozone resistance after spraying and the electrochemical stability in the sewage treatment plant environment showed that Ti has the highest polarization resistance of $403.83k{\cdot}{\Omega}{\cdot}cm^2$, which ensures high levels of durability.

• Journal of Technology Innovation
• /
• v.27 no.1
• /
• pp.45-77
• /
• 2019

The balance between exploration for new possibility and exploitation for existing certainty is an important issue in strategy, innovation, R&D as well as organization learning. Among the convergence trends of technologies, many firms seek to have the wider technological knowledge assets and the deeper technology capabilities for the sustainable competitive advantage at the same time. While firms plan technology portfolio strategies, they should consider the attribute of the technology. Nanotechnology, a cutting-edge technology, is a general purpose technology, unlike conventional product-oriented technologies. This empirical study was focused on how multi-national firms' exploration and exploitation strategies for nanotechnology affect their innovative and financial performance. It uses multiple regression analysis on panel data. This result shows that the more diversified and specialized nanotechnology as platform technology is positively related to their innovative and financial performance, unlike the research results for product-oriented technologies. In addition, exploratory innovation is more effective to firm performance than exploitation. This implies how global firms can manage effectively platform technology strategies under the constraints of resources.

• Clinical and Experimental Pediatrics
• /
• v.61 no.12
• /
• pp.403-406
• /
• 2018

Floating-Harbor syndrome is a rare autosomal dominant genetic disorder associated with SRCAP mutation. To date, approximately 50 cases of Floating-Harbor syndrome have been reported, but none have been reported in Korea yet. Floating-Harbor syndrome is characterized by delayed bony maturation, unique facial features, and language impairment. Here, we present a 6-year-old boy with a triangular face, deep-set protruding eyes, low-set ears, wide nose with narrow nasal bridge, short philtrum, long thin lips, clinodactyly, and developmental delay that was transferred to our pediatric clinic for genetic evaluation. He showed progressive delay in the area of language and cognition-adaption as he grew. He had previously undergone chromosomal analysis at another hospital due to his language delay, but his karyotype was normal. We performed targeted exome sequencing, considering several syndromes with similar phenotypes. Library preparation was performed with the TruSight One sequencing panel, which enriches the sample for about 4,800 genes of clinical relevance. Massively parallel sequencing was conducted with NextSeq. An identified variant was confirmed by Sanger sequencing of the patient and his parents. Finally, the patient was confirmed as the first Korean case of Floating-Harbor syndrome with a novel SRCAP (Snf2 related CREBBP activator protein) mutation (c.7732dupT, p.Ser2578Phefs*6), resulting in early termination of the protein; it was not found in either of his healthy parents or a control population. To our knowledge, this is the first study to describe a boy with Floating-Harbor syndrome with a novel SRCAP mutation diagnosed by targeted exome sequencing in Korea.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.219-228
• /
• 2019

This study summarized processing factor (PF) by the stage of rice and barley processing based on JMPR reports from 2006 to 2016. We compared PF of 17 pesticides in rice products during the processing of rice grain, husked rice, polished rice, hulls, bran and cooked rice. Among the 17 pesticides, 12 pesticides except for 5 pesticides such as acephate, methamidophos, glufosinate, quinclorac and sulfoxaflor mostly decreased in pesticides when rice grain processed into brown rice. Pesticides tended to be partially reduced when processed from husked rice to polished rice. However, hulls and bran produced during the milling process were concentrated. Acephate and others, 5 pesticides are systemic pesticides, and pesticides are penetrated into foods, and a large amount of pesticides was not removed during the milling process. The remaining pesticide residues in polished rice were mostly removed after processing into cooked rice, and trace amounts of pesticide residues remained. In the comparison of 23 pesticides PF during the processing of barley products (pearl barley, flour, short, malt, beer, hulls and bran). Most of the pesticide except for 4 pesticide (ethephon, pyraclostrobin, penthiopyrad, sulfoxaflor), which are systemic pesticides, decreased during the process of pearl barley production out of the barley grain. The pesticide in the malt, which was made by steeping pearl barley was concentrated but when processed into beer, pesticide was remained only in trace amounts.

• Journal of Gynecologic Oncology
• /
• v.29 no.6
• /
• pp.83.1-83.10
• /
• 2018

Objective: We aimed to propose a set of quality indicators (QIs) based on the clinical guidelines for cervical cancer treatment published by The Japan Society of Gynecologic Oncology, and to assess adherence to standard-of-care as an index of the quality of care for cervical cancer in Japan. Methods: A panel of clinical experts devised the QIs using a modified Delphi method. Adherence to each QI was evaluated using data from a hospital-based cancer registry of patients diagnosed in 2013, and linked with insurance claims data, between October 1, 2012, and December 31, 2014. All patients who received first-line treatment at the participating facility were included. The QI scores were communicated to participating hospitals, and additional data about the reasons for non-adherence were collected. Results: In total, 297 hospitals participated, and the care provided to 15,163 cervical cancer patients was examined using 10 measurable QIs. The adherence rate ranged from 50.0% for 'cystoscope or proctoscope for stage IVA' to 98.8% for 'chemotherapy using platinum for stage IVB'. Despite the variation in care, hospitals reported clinically valid reasons for more than half of the non-adherent cases. Clinically valid reasons accounted for 75%, 90.9%, 73.4%, 44.5%, and 88.1% of presented non-adherent cases respectively. Conclusion: Our study revealed variations in pattern of care as well as an adherence to standards-of-care across Japan. Further assessment of the causes of variation and non-adherence can help identify areas where improvements are needed in patient care.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.489-498
• /
• 2021

The previous researches on the succession plan have the limitation that it has focused on policies or systems at the government level to facilitate succession, or is limited to family companies. In this study, we would like to analyze the effect of the actual utilization of the succession system for small and medium-sized enterprises rather than the succession by direct families or the government's policies. We would also like to identify other situational factors that may affect this relationship to better understand the succession plan and its relationship with organizational performance. To this end, the analysis of 172 small and medium-sized enterprises in the Human Capital Enterprise Panel showed that the more practical the succession plan of small and medium-sized enterprises is used, the more positive the organizational performance is. These results suggest that small and medium-sized enterprisess succession plan can have a positive impact on organizational performance, such as implicit transfer and formation of positive impressions of companies. Furthermore, cooperative industrial relations strengthened the degree of utilization of succession plans and the positive relationship with organizational performance. Such results showed that the more cooperative the labor-management relations are, the more the successor can secure legitimacy in the process of succession planning based on trust between labor and management.

• Korean Journal of Labor Studies
• /
• v.19 no.1
• /
• pp.139-175
• /
• 2013

This study analyzed differences and determinants of job satisfaction by employment type using the Korean Labor and Income Panel Data (KLIPS) (5th~13th) and obtained the following results. First, it was found that the job satisfaction of regular employees was significantly higher than that of non-regular employees and, as a result of analyzing job satisfaction by subdividing various types of employment within the non-regular employment category, 'temporary work' was found to have the highest satisfaction, while 'long-term non-regular work' had the lowest. Further, as a result of analyzing the differences in job satisfaction by the method of career choice, it was found that job satisfaction in the case of choosing a job voluntarily was higher than that in the case of choosing a job involuntarily. Second, as a result of analyzing the determinants of job satisfaction by employment type, all variables in regular employment were found to have statistically significant effects on job satisfaction, which is a dependant variable, whereas non-regular employment was found to have a limited effect only depending on the employment type. In case of the determinants of job satisfaction according to the method of career choice, they were found to have statistically significant effects on all variables except for the career variable in the group that chose employment voluntarily, whereas they were found to have significant effects on some variables only such as gender and wage, etc., in the group that chose employment involuntarily. Therefore, it is more suitable to analyze job satisfaction by subdividing it by employment type rather than dividing it into regular employment and non-regular employment, although the method of career choice (voluntary/involuntary) also needs to be considered.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.2
• /
• pp.100-107
• /
• 2021

An agrivoltaic system (AVS) is a system of innovation that comprises productions of photovoltaic power and agricultural crops on the same area. However, the decline in crop yield will be fatally occurred because the pigments of crop absorbs less light energy under AVS. In addtion, the photosynthetic capacity of crop grown under the partial shading of AVS is not well reported. In this study, the electron transport rate (ETR) and non-photochemical fluorescence quenching (NPQ) of soybean and rice under the AVS in Boseong and Naju was investigated using chlorophyll fluorescence measurement. The ETR value of soybean and rice under AVS were not significantly differed by location. It represents that the photophosphorylation rate of the crops is not critically different. It means that the decreases in total photosynthesis under AVS were mostly affected by the amount of light absorbed by leaves. Under AVS the photosynthesis of crops will be lower than field crops grown in open fields. This is because the crops under AVS observed higher NPQ, which means that the available energy cannot distribute to photophosphorylation reaction.