• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.115-122
• /
• 2005

This study analyzed the characteristics of four kinds of bridge rubber pads and suggested how to determine the stiffness the pads. The stiffness of rubber pads can be estimated by a direct static test. In the procedure to estimate the stiffness of a pad, the dead load(preload) of a bridge and live load of a vehicle are considered. The polyurethane rubber pads have larger hardness than natural and chloroprene rubber pads and thus carry larger load bearing capacity. In addition, they showed higher stiffness with the same shape factor than the others and thus are more avaliable as for bridge bearings. Although natural and chloroprene rubber pads are elongated to large deformation in horizontal direction due to vertical loads, polyurethane rubber pads almost do not generate horizontal deformation due to vertical loads regardless to the thickness and hardness of the pads. Therefore, they do not need reinforced plate to restrict horizontal deformation.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.307-316
• /
• 2005

This study analyzed the characteristics of four kinds of bridge rubber pads and suggested a method of determining the stiffness and the damping ratio of the pads.The stiffness of rubber pads can be estimated by a direct static test and a dynamic test indirectly.This study used both methods to determine the pad's stiffness.The damping ratio of pads can be obtained using the dynamic test and the damping ratio of polyurethane rubber pads was estimated to aproximate that of natural and chloroprene rubber pads.The polyurethane rubber pads are harder than natural and chloroprene rubber pads and thus carry larger load bearing capacity.In addition, they showed higher stiffness with the same shape factor than the others and thus are more available for bridge bearings.Although natural and chloroprene rubber pads are elongated to large deformation in the horizontal direction due to vertical loads, polyurethane rubber pads almost do not generate horizontal deformation due to vertical loads regardless of the thickness and hardness of the pads.Therefore, they do not need reinforced plate to restrict horizontal deformation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.597-603
• /
• 2010

Metallic sintered brake pads are often applied to Mid/High Speed Train due to its high strength and thermal characteristics. Because of its imbalance contact between discs and pads can greatly influence the life span, one sided wear, discs attack/crack and threat the safety of the train during operation. In this research, we analyzed pressure/temperature distribution between brake pads and disks. Analyzed data had been verified and modified to conduct further tests of Flexible brake pads with small/full-scale dynamo test. Flexible brake pads were installed to TTX train to conduct further tests to identify the differences between Rigid brake pads and Flexible brake pads. In result, Flexible brake pads showed outstanding disk thermal stability, one sided wear, noise and life of pad than rigid brake pad.

• Tribology and Lubricants
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2011

Metallic sintered brake pads are often applied to mid/high speed train due to their high strength and thermal characteristics. Imbalance contact between discs and pads can greatly influence the life span, one sided wear, discs attack/crack and threat the safety of the train during operation. In this research, we analyzed pressure/temperature distribution between brake pads and disks. Analyzed data had been verified and modified to conduct further tests of flexible brake pads with small/full-scale dynamo test. Flexible brake pads were installed to high speed train to conduct further tests to identify the differences between rigid brake pads and flexible brake pads. In result, Flexible brake pads showed outstanding disk thermal stability, one sided wear, noise and wear rate than rigid brake pad.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.77-84
• /
• 2014

Menstruation being an inevitable phenomenon for every women, reducing the discomfort during the menstruation period is one of the important issues for women's well-being. This study was conducted through user evaluations on disposable pads and reusable pads to comprehend the discomfort factors of the sanitary pads and to provide basic information for improvement. Negative symptoms of the reponses on menstruation outnumbered the positive aspects, and the results suggested that menstruation period was perceived as a painful experience to women. There were difference between the negative and positive responses regarding the designs, functions, fittings, wearing sensations. and disposabilities of disposable pads and reusable pads. While disposable pads had the strength of convenient use, it had the weakness of wearing sensation, and while reusable pads had the strength of wearing sensation, it had the weakness of inconvenient keeping. When designs reflecting these results are made, it is expected to bring a synergy effect by bringing both a more pleasant menstruation period for the consumers and eventual profit to the manufacturers.

• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.59-66
• /
• 2004

In the present study, ceramic brake pads without fiber phases were manufactured by the low temperature heat treatment below$ 700 ^{\circ}C$. The manufacturing parameters of ceramic brake pads and those levels were investigated by the analysis results of signal-to-noise ratios, ANOVA based upon the Taguchi method. The ceramic brake pads prepared in the Mg experiment had a friction coefficient of 0.30～0.55 very close to the target coefficient (0.35～0.45) of commercial brake pads utilized in the automobiles. The frictional properties of ceramic brake pads could be stabilized with the adjustment of amounts of lubricating additives. The optimum preparation conditions as well as batch formulations for the fabrication of non-fibrous ceramic brake pads were finally determined using Taguchi method in this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.80-84
• /
• 1996

The effects of guide pads on burnishing action and accuracy of machined hole are investigated in drilling with burnishing drill using a speciaaly designed tool experimentally. The cutting forces are balanced at the small forward regions of guide pads. The burnishing action takes place under a high contact pressure between the bore wall and those regions. The over size mechanism of machined hole by the guide pads is discussed.

• Women's Health Nursing
• /
• v.14 no.3
• /
• pp.173-180
• /
• 2008

Purpose: This study was to explore the perception about menstruation and discomforts of using disposable menstrual pads in menstruating women. Method: A survey was conducted of 132 menstrual women recruited by convenience sampling. Data were collected by a face-to-face interview and a study questionnaire, and analyzed by frequency and $X^2$-test. Result: More than half of the subjects expressed a negative perception about menstruation, while 25% expressed a mixed perception and 24.2% expressed a positive perception. Women who perceived their menstruation negatively had more menstrual pain than the others (p<.001). The most frequently experienced discomforts of using disposable pads were an unpleasant smell (18.9%), leakage (18.9%), and discomfort (16.6%). Adverse effects of using disposable pads were reported as an itching sense (23.1%). skin rash (20.2%), and skin irritation (10.6%). Alternate materials were reported with tampons, alternate washable pads, and maternity pads. Conclusion: The results indicate that disposable menstrual pads cause several discomforts and common adverse effects such as skin problems. To decrease these discomforts and relieve adverse effects, planned nursing education including women's personal hygiene methods and information about an alternate pad may be helpful.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.41-50
• /
• 2013

This study aims to contribute to development of sanitary pad meeting customers' requirements by examining types, sorts, sizes and specifications of cloth sanitary pads currently sold in the market, and the results are as follows. First, with respect to materials of inside cloth of cloth sanitary pads, in most cases, 100% cotton knit was used as materials of the inside cloth and the pads were finished with knit cotton(including organic cotton) and woven cotton bias. Second, for the structures of the cloth sanitary pads, the Jacquard knits in the shape of beehive or waffle are mostly used. Third, the sizes of cloth sanitary pads were classified with 7 sorts were discovered that can be divided into liner, small-size, medium-size, large-size, overnight, extra overnight, accounting for the most percentage among cloth sanitary pads. Fourth, 11 sorts among cloth sanitary pads whose front and back shapes are the same were discovered, accounting for the most percentage. Fifth, cloth sanitary pads can be largely classified into a wing type, all-in-one type and insertion type, which includes subsidiary absorption layer. 9 sorts were wing types and all-in-one types, accounting for the most and percentage. Compared with the scope of the market for women's articles, there is no relevant study, so this study is expected to provide basic materials for women's articles and contribute to development of environment-friendly products as an alternative to a disposable sanitary pad which not only causes environment pollution but also has bad effects on women's health.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.485-498
• /
• 2020

Sanitary pads are used with for the sanitization of menstruation bleeding. In this research, twenty medium size disposable sanitary pads were selected from domestic and international brands in order to analyze their shape and size. Additionally, 6 sanitary pads were selected among the 20, and user experience evaluations were completed. The analysis on the shape of the 20 sanitary pads showed that straight-shape pads existed more than curved-shape pads. The means of total pad length, wing length, wing width, front pad width, back pad width, front pad length, and back pad length were 24.5 cm, 8.8 cm, 3.0 cm, 10.0 cm, 10.2 cm, 11.6 cm, and 13.0 cm, respectively. All selected pads were medium size; however, detailed sizes varied between brands. Eighty-one women participated on user experience evaluation. Participants felt that brand F was the longest and brand D the shortest. The results matched with the results on actual pad length measurement. Participants evaluated the fit of brand E most positively and fit of brand A most negatively. The current study provides valuable information for developing disposable sanitary pads.