• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.130-145
• /
• 2019

Widespread commercialization of solid oxide fuel cells (SOFCs) is expected to be realized in various application fields with the advent of cost-effective fabrication of cells and stacks in high volumes. Cost-reduction efforts have focused on production yield, power density, operation temperature, and continuous manufacturing. In this article, we examine several issues associated with processing for SOFCs from the standpoint of the bimodal packing model, considering the external constraints imposed by rigid substrates. Optimum compositions of composite cathode materials with high volume fractions of the second phase (particles dispersed in matrix) have been analyzed using the bimodal packing model. Constrained sintering of thin electrolyte layers is also discussed in terms of bimodal packing, with emphasis on the clustering of dispersed particles during anisotropic shrinkage. Finally, the structural transition of dispersed particle clusters during constrained sintering has been correlated with the structural stability of thin-film electrolyte layers deposited on porous solid substrates.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.309-316
• /
• 2017

In injection molding, the quality of an injection molded product varies greatly depending on the molding conditions. Many researche studies have been conducted on the quality analysis of molded parts according to the molding conditions such as injection pressure, injection temperature, and packing pressure. However, there have not been many studies on the V/P switchover timing. It is known that when a large pressure is applied to a cavity in the packing phase, the cavity pressure is most affected by the packing pressure. In addition, depending on the position (timing) of the packing pressure, it can have a direct influence on quality based on the shrinkage and dimensions of the molded parts. In this study, the change in pressure profile in the cavity according to the V/P switchover position is confirmed. A CAE analysis program (Moldflow) was used to simulate and analyze two models using the PC and PBT materials. In order to compare these results with the actual injection molding results, injection molding was performed for each V/P switchover position, and the correlation between simulation and experiment, especially for the shrinkage of molded parts, was evaluated.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.130-137
• /
• 1988

This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.17-24
• /
• 1993

사출성형 문제는 열전달과 유체유동이 복합된 문제라고 할수 있다. 사출성형 공정은 충진(filling), 보압(packing) 및 냉각과정(cooling phase)으로 이루어 진다. 충진과정은 높은 점성의 Non-Newtonian유체가 몰드내의 캐버티로 사출됨으로써 이루어지며 플라스틱의 점성도는 플라스틱의 온도 및 유동속도와 관련이 크며 이 flow-rate는 점도와 더불어 변화한다. CAE 유동해석 프로그램은 유체의 흐름과 열전달을 이용하여 충진과정을 이해하는데 이용되고 있다. 본 고에서는 사출성형 과정 중 충진과정에 대한 컴퓨터 시뮬레이션과 그 적용사례에 대하여 살펴본다.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.8 no.1
• /
• pp.15-21
• /
• 2012

Extraction of all nonrestorable teeth prior to bone marrow transplantation is the major dental management of the patient being prepared for the transplantation. But, there are four principal causes for excessive bleeding in the immediate postextraction phase ; (1) Vascular wall alteration (wound infection, scurvy, chemicals, allergy) (2) Disorders of platelet function (3) Thrombocytopenic purpuras (4) Disorders of coagulation (liver disease, anticoagulation drug-heparin, coumarin, aspirin, plavix) If the hemorrhage from postextraction wound is unusually aggressive, the socket must be packed with local hemostatic agent and wound closure & pressure dressing are applied. But, in dental alveoli, local hemostatic agent (gelfoam, surgcel etc) may absorb oral microorganisms and cause alveolar osteitis (infection). This is a case report of bleeding and infection control by suture, pressure packing and iodoform gauze drainage on infected active bleeding extraction socket under sedation and local anesthesia in a 57-years-old multiple disabled patient with anticoagulation drug.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.236-236
• /
• 2006

Time-resolved photoluminescence spectroscopy measurements of oligofluorenes with various side chains were studied. With extremely pure oligofluorenes, two kinds of red-shifted green emission were observed which have different origins; aggregate formation and on-chain chemical defect. The green emission around 490 nm was largely dependent upon the intermolecular interaction of oliglfuorene molecules. Moreover, by using oligofluorene with high-order liquid crystalline phase, we observed that the green emission was strongly dependent upon the molecular packing in solid films.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.450-450
• /
• 2000

This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.

• Clean Technology
• /
• v.7 no.2
• /
• pp.127-132
• /
• 2001

The effects of activated-carbon (AC) packing length on the Pressure Swing Adsorption (PSA) performance was investigated for the hydrogen separation from the multicomponent mixture gas. Linear driving force model was used to describe mass transfer between two phase and coupled Langmuir isotherm was used for each component as a nonlinear adsorption isotherm. When two adsorbents with a different adsorption capacity were packed consecutively in one bed, it is very important to determine the packing ratio of zeolite to activated carbon affecting the purity and recovery of the product. The activated carbon packing length in adsorption tower of 120 cm was determinated by the ending point of $CO_2$ contration. The optimum length of an activated carbon layer was 65 cm for production of high-purity hydrogen.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.180-185
• /
• 2000

Nano crystalline or non-crystalline particles have been widely used in various industrial area, such as ceramics, catalysis, electronics, metallurgy and optic device. In all applications, synthesizing the particles as small as possible and controlling the crystalline phase according to its purpose are necessary for the enhancement of processing performance. In some cases, non-agglomerated particles may be necessary for solving the packing problems. This motivates our attempt of controlling size, morphology, phase of nano titania and silica particles. If one can enhance sintering rate of small aggregates independently of collision rate, one may expect that original aggregates can be changed into volume equivalent spheres and thereby the decrease of collision frequency due to the change leads to much smaller rate of growth of the particles. This is the basic idea of our control strategy.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.374-381
• /
• 2000

Composites of polypropylene (PP) and organically modified montmorillonite (org-MMT) were prepared by melt mixing in an intensive mixer. Three grades of PP's having different melt viscosities were employed to investigate the dispersion characteristics of the composites with various org-MMT's. Depending on the matrix viscosity and nature of the interlayer in org-MMT significant variations of the phase structure were found. Under the constant mixing condition and matrix viscosity, intercalation of PP chains into the interlayer of org-MMT was possible when initial interlayer distance and packing density were maintained in the optimum range; by which the loss in entropy associated with the confinement of polymer chains was compensated. The state of org-MMT particle dispersion was improved by increasing the matrix viscosity only in the case that dispersed phase is suitable for intercalation process thermodynamically, otherwise little variation was occurred regardless of the matrix viscosity. Due to the lack of specific interaction between PP and erg-MMT considered here, although the intercalation was possible for an appropriate org-MMT, the composites revealed unstable phase structure upon increasing the mixing time, which was characterized by agglomeration of the org-MMT domains.