• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.71-85
• /
• 1997

The purpose of this study was to evaluate concentrations of organic solvent mixtures in air of rotogravure printing workplaces. Qualitative and quantitative analysis of organic solvents contained in the gravure inks used at rotogravure factories had been done. The results obtained were as follows: 1. The gravure inks mainly consist of toluene, methyl ethyl ketone(MEK), and ethyl acetate(EA), and traces of isopropyl alcohol(IPA), xylene, 2-butanol, cyclohexane, cellosolve etc were also contained in them. 2. Thinner used as a diluent consist of toluene, MEK, and EA. 3. Geometric mean concentration of toluene in ambient air were 23.81 ppm at gravure printing of packing material, 42.10 ppm at gravure printing of wallpaper, 16.95 ppm at gravure printing of plastic bottle for beverage and 4.31 ppm at gravure printing of plywood printing or floor covering. Concentrations of toluene in ambient air showed statistically significant difference between types of printing. 4. Concentrations of MEK in ambient air were 12.43 ppm at gravure printing of packing material, 5.47 ppm at gravure printing of wallpaper, 16.78 ppm at gravure printing of plastic bottle for beverage and 16.44 ppm at gravure printing of plywood printing or floor covering. MEK concentrations in ambient air showed no significant difference. 5. Conentrations of EA were 14.30 ppm at gravure printing of packing material, 1.92 ppm at gravure printing of wallpaper and 21.12 ppm at gravure printing of plywood printing or floor covering. EA concentrations in ambient air shown significant difference. 6. Percentage of the workplaces where the ambient air concentration of organic solvent mixtures exceeded the Korean Permissble Exposure Level(KPEL) amounted to 18.03%. 7. Toluene concentrations in ambient air of rotogravure printing workplaces ranged from 0.69 to 156.02 ppm and urinary hippuric acid excretion ranged from 0.10 to $1.32g/{\ell}$.

• Korean journal of communication and information
• /
• v.73
• /
• pp.92-128
• /
• 2015

We found that world wide popularity was attracted by Korea culture aspects of Psy's . The main factors that caused the syndrome, we noticed that the image of Korea. Expressly, we compared the Korea cultural scene that appeared in and . So, we analyzed successful Korea cultural factors of . For the analysis, we applied the Q methodology. As a result, in , we found 'Recreation Type', 'Advanced Development Type', 'Relieve fatigue type' and 'Adult Type'. Most of these factors have been recognized in Korea cultural factors. we found 'Communal Dancing Type', 'Cheeky Dance Type', 'Pleasant Packing Carriage Type', and 'afflicting type'. However, the Korean factor of were identified only 'Packing Carriage Culture'.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.21-24
• /
• 2008

This research verifies efficiency of Beam-Slab connection with Precast Prestressed Concrete Slab System of WAffle Shape(WAS) which solves problems of double-T system(DTS). Specimen is produced in Precast Concrete factories and is made in a way that WAS is layed across inverted T beam(ITB) and then it is filled with packing. After casting topping concrete into the specimen, curing is carried out. Variable are width of shear key and packing. The analysis is carried out in comparison between displacement and strength of Beam-Slab connection of specimen. The variable is not a effect in joint efficiency. Consequently, it may plans at the minimum with of shear key that packing is easy, will not affect strength.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.248-255
• /
• 2013

The objective of this study is to optimize the Metal Injection Molding(MIM) process with design of experiments(DOE) and numerical analysis. To derive the optimal process condition, experiment or numerical analysis was performed under various process conditions. To analyze the interaction among influential factors contributing to the temperature at flow front and response surface in MIM, both central point and axial point were added to the full factorial design with 2 levels and 5 factors and then their impacts on response variable in 43 experimental conditions were analyzed and the significance was evaluated. As a result, sprue, runner, and gate were completely filled in about 0.247 seconds after injection, the front part of the green body was filled in about 0.3344 seconds, the green body except gate, etc changed to almost solid state in about 3.29 seconds, the Packinging pressure was completed in about 6.29 seconds, and the green body inside and outside and sprue, etc became solid in 13.2 seconds. The impact of individual or reciprocal action of factors on the temperature at flow front was analyzed through regular probability, test statistics, main effect, and interaction effect. As a result, of a total of 31 combinations of factors, 9 unit factors and reciprocal actions were significant, and the screening was also possible. A proper regression equation was drawn with regression analysis and response surface design on the response variable of temperature at flow front, and the applicability could be verified.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.305-312
• /
• 2014

Most of military supersonic aircraft use an afterburner. It plays an important role in performing unusual duties for supersonic flight, takeoff, and combat situations. Recently, repetitive fuel leakage from the inner piston packing rubber of afterburner fuel pump in an aircraft J85-GE-21 turbojet engine has happened. These failures have only happened in one manufacturer's parts of two manufacturers. Thus, the cause of these failures was investigated through the comparative analysis for both the failed and the unfailed with two different manufacturers using various analysis methods. The failure analysis was performed using analysis methods such as swelling or swelling ratio, total sulfur content, polymer identification, loading and surface area of carbon black, and hardness. Consequently, the main cause of this failure was identified to be insufficient loading of carbon black as a reinforcing agent, together with small surface area of carbon black and somewhat low sulfur content.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.37-44
• /
• 2015

In this paper dynamic deformation of lower hinge of refrigerator is simulated using dynamic finite element analysis while refrigerator is being dropped. The flow stress curves considering velocity dependency of hinge and lower packing material are determined through bending test and compression test at several dropping speeds. The determined material properties and flow stress from reverse engineering were used as input data for refrigerator's drop test using a dynamic finite element analysis software LS-DYNA. Additionally the result between CAE and 3D deformation measurement from real refrigerator drop test are compared and the result shows that the proposed analysis model is very useful to design lower hinge and lower packing endurable to the impulsive drop impact.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.323-330
• /
• 2023

The skin's barrier structure is formed through the differentiation process of epidermal keratinocytes. It consists of corneocytes that are composed of keratin proteins and lipids that fill the spaces between them. During this process, the lipids such as phospholipid that made up the membrane of the basal layer cells of the epidermis are decomposed and replaced with newly synthesized components like ceramide. In this study, the effect of ginsenoside Rg3 components on the packing of the intercellular lipid structure of the skin barrier and the barrier function was confirmed. To confirm this, Rg3 components were treated during the differentiation process of 3D epidermal cells. The FT-IR and TEWL analysis on 3D epidermis showed an enhancement in the orthorhombic lipid packing and an improvement in barrier function. Additionally, in HaCaT cells, an increase in the expression of EVOL1 and EVOL4, which synthesize long-chain lipids, was detected, along with a decrease in CERS6, which synthesizes short-chain ceramide, and an increase in ACER6, which decomposes ceramide using phytosphingosine. This suggests the possibility that Rg3 affects lipid synthesis during the epidermal differentiation process, resulting in changes in barrier function.

• Culinary science and hospitality research
• /
• v.23 no.8
• /
• pp.17-26
• /
• 2017

This study compared and analyzed the importance-satisfaction regarding the selection attributes of the convenience store focusing on PB lunch box for consumers of 20s and 30s. According to the research results, the importance of factors such as easy purchase, time reduction, convenient intake were found to be high among the selection attributes of the convenience store PB lunchbox and those of factors such as confirmation of food ingredients, nutrition, and new taste were found to be relatively low. In addition, factors with high satisfaction included easy purchase, convenient intake, time reduction, while factors with low satisfaction were confirmation of food ingredients, nutrition and hygiene. The results of the IPA analysis were as follows: The $1^{st}$ quadrant (Keep up the good work) included convenience, time reduction, easy purchase, convenient intake, convenient cooking method, and convenient packing container Etc. $2^{nd}$ quadrant (possible overkill) includes origin labeling and the 3rd quadrant (low priority) includes packing container design, convenient storage, consistency of quality and taste, good taste, moderate amount, new taste, one meal, moderate quantity and quality, inexpensive intake, and hygiene Etc. $4^{th}$ quadrant was found to include no corresponding factors.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.12
• /
• pp.31-39
• /
• 1998

This paper presents the design and implementation of a new multimedia fixed-point DSP (MDSP) core for portable multimedia applications. The MDSP instruction set is designed through the analysis of multimedia algorithms and DSP instruction sets. The MDSP architecture employs parallel processing techniques, such as SIMD and vector processing as well as DSP techniques. The instruction set can handle various data formats and MDSP can perform two MAC operations in parallel. The switching network and packing network can increase the performance by overlapping data rearrangement cycles with computation cycles. We have designed Verilog HDL models and the 0.6 $\mu\textrm{m}$ Samsung KG75000 SOG library is used. The total gate count is 68,831 and the clock frequency is 30 MHz.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.94-95
• /
• 2016

Calcium Silicate Hydrate (C-S-H), which takes up most of the hydration products of Portland Cement (PC), has the greatest impact on the mechanical behavior and strength development of concrete. The exact mechanism of its deformation, however, has not yet been elucidated. The present study aims to demonstrate the mechanism of nano-deformation behavior of C-S-H in tricalcium silicate paste under compressive loading, unloading and reloading by interpreting atomic pair distribution function (PDF) based on synchrotron X-ray scattering. The strain of the tricalcium silicate paste for a short-range of 0 ~ 20 Å under compressive load exhibited two stages, I) nano-packing of interlayer of C-S-H and II) micro-packing of C-S-H globules, whereas the deformation for a long-range order of 20 ~ 40 Å was similar to that of a calcium hydroxide phase measured by Bragg peak shift. Moreover, the residual strains due to the plastic deformation of C-S-H was clearly observed.