• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.1-10
• /
• 2009

In a network-based approach such as Proxy Mobile IPv6 (PMIPv6), the serving network controls the mobility management on behalf of a Mobile Node (MN), thereby eliminating a MN from any mobility-related signaling. Although PMIPv6 is being standardized by the IETF NetLMM WG, PMIPv6 still suffers from a lengthy handover latency and the on-the-fly packet loss during a handover. Therefore, this paper presents an enhanced fast handover scheme for PMIPv6. The proposed handover scheme uses the Neighbor Discovery message of IPv6 to reduce the handover latency and packet buffering at the Mobile Access Gateway (MAG) to avoid the on-the-fly packet loss during a handover. In addition, it uses an additional packet buffering at the Local Mobility Anchor (LMA) to solve the packet ordering problem. We evaluate the performance of the proposed handover scheme using both analytical model and simulation. The numerical analysis shows that the proposed scheme has a relatively shorter handover latency. Simulation results demonstrate that the proposed scheme could avoid the on-the-fly packet loss and ensure the packet sequence.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.266-271
• /
• 2009

A modeling method for the modal analysis of a multi-packet blade system having a crack undergoing rotational motion is presented in this paper. Each blade is assumed as a slender cantilever beam. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. Hybrid deformation variables are employed to derive the equations of motion. The flexibility due to crack, which is assumed to be open during the vibration, is calculated basing on a fracture mechanics theory. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters related to the angular speed, the depth and location of a crack on the modal characteristics of the system are investigated with some numerical examples.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.641-648
• /
• 2003

In this paper, we propose a general analysis tool that derives guaranteed delay bounds for real-time sessions when those sessions pass through heterogeneous schedulers in general packet networks. This tool characterizes each different scheduler by a homogeneous service curve server. We show that service curve servers can characterize a strictly larger class of schedulers than LR servers. That is, we can characterize not only all LR servers but also RC-EDF and SC scheduler by service curve servers. Even with such advantage over LR servers, service curve servers provide accurate analysis results. We prove mathematically that if we analyze a network that can be analyzed by both LR servers and service curve servers,,both cases yield the same delay bound.

• Journal of Internet Computing and Services
• /
• v.20 no.2
• /
• pp.21-27
• /
• 2019

The terrestrial ATSC 3.0 broadcasting system, which is capable of converging broadcast and communication services, uses IP based technology for data transmission between broadcasting equipment. In addition, data transmission between broadcasting equipment uses IP-based technology like existing wired communication network, which has advantageous in terms of equipment construction and maintenance In case IP based data transmission technology is used, however, it may inevitably cause an error that a packet is lost during transmission depending on the network environments. In order to cope with a broadcasting accident caused by such a transmission error or a malfunction of a broadcasting apparatus, a broadcasting system is generally configured as a duplication, which can transmit a normal packet when various types of error may occur. By this reason, correction method of error packets and intelligent switching technology are essential. Therefore, in this paper, we propose a design and implementation of intelligent IP switch for Ensuring Reliability of ATSC 3.0 Broadcast Streams. The proposed intelligent IP consists of IP Stream Analysis Module, ALP Stream Analysis Module, STL Stream Analysis Module and SMPTE 2022-1 based FEC Encoding/Decoding Module.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.193-200
• /
• 2022

Unknown cryptographic communication protocols may have advantage of guaranteeing personal and data privacy, but when used for malicious purposes, it is almost impossible to identify and respond to using existing network security equipment. In particular, there is a limit to manually analyzing a huge amount of traffic in real time. Therefore, in this paper, we attempt to identify packets of unknown cryptographic communication protocols and separate fields comprising a packet by using machine learning techniques. Using sequential patterns analysis, hierarchical clustering, and Pearson's correlation coefficient, we found that the structure of packets can be automatically analyzed even for an unknown cryptographic communication protocol.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.2
• /
• pp.126-135
• /
• 2011

In this study, numerical analysis was carried out by using the finite element method to construct the first mode shape of damaged stiffened plates, and the damage locations were detected with two-dimensional discrete wavelet analysis. In the experimental analysis, four different damaged stiffened structures were observed. Firstly, each damaged structure was hit with a shaker, and then accelerometers were used to measure the vibration responses. Secondly, the first mode shape of each structure was obtained by using the wavelet packet, and the location of cracks were also determined by two-dimensional discrete wavelet analysis. The results of the numerical analysis and experimental investigation reveal that the proposed method is applicable to detect single crack or multi-cracks of a stiffened structure. The experimental results also show that fewer measurement points are required with the proposed technique in comparison to those presented in previous studies.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1767-1777
• /
• 2010

In digital TV broadcasting, such as terrestrial, cable, satellite, and IPTV, the head-end of digital TV broadcasting has a more complicated transmission structure than that of analog TV broadcasting. Furthermore, digital TV broadcasting has a feature that supports multiplex models, such as Multiple Program Transport Stream (MPTS). Therefore, the purpose of our work was to design and examine a more efficient new system of emergency alert message transmission to support the digital TV broadcasting environments. Digital TV broadcasting is the IP generation or RF transmission of 8-VSB, QAM, and QPSK modulated through a multiplexer or re-multiplexer multiplexed stream as a MPEG-2 Transport Stream after content encoding. The new system proposed in this paper transmits an emergency alert message without scrambling after replacing the PID and payload of the -packet with the message prototype in the TS stream from the multiplexer. If we need to transmit an emergency alert message under digital TV broadcasting services, then the receiver first checks the PID of each packet in the TS stream for the emergency alert message. Next, if a packet is determined to be an emergency alert message, then the set-top box displays the message on the TV screen using its function of On Screen Display, or the PC based software displays the message on the monitor screen using its function of overlay with user interface if the packet is found to be an emergency alert message. We have designed an emergency alert message protocol and a system model. By experiments and analysis of the system, we concluded that the system achieved efficiency and the ability to send and receive emergency alert messages using the system under different digital TV broadcasting service environments.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.69-76
• /
• 2002

With the growth of data communication service by mobile devices, WAP is proposed to efficiently access the Internet contents by user request through wireless condition that has a high error rate and mobility. But, because a transmission speed of WAP is limited, it takes many times to transmit and to receive the data. This paper has studied the WAP packet transmission time using WTP-SAR algorithm. As a method that is to improve transfer capability of WAP, using SAR function in WTP, total message down from upper layer has been fragmented and packet is transmitted through RLP frame time slot. Then, we have analyzed the transmission time of WAP packet with variable RLP layer size on the wireless CDMA network for next generation systems. From the results, we could obtain the WAP packet transmission time and optimal WTP packet size.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.252-255
• /
• 2010

In this thesis, it suggests large scale interactive display system which is able to various touch interaction and bases on infrared LED BAR and using 3D. Interaction layer formed on space from screen which is able to feel 3D using suggested IR LED BAR. It gets the image in real time what is composed in interaction section using infrared camera with band pass filter. The image finds touch interaction coordinate through image processing module and saves as packet. It send packet to server through network data communication. It analyze packet by metaphor analysis module and save as metaphor event and send it to contents. On contents, it practices to metaphor event result in real time so it makes use touch interaction in stereopsis. According to this process, it does not need touch the screen at firsthand but it is possible system and touch interaction so touch interaction is possible while use 3D.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.793-805
• /
• 2001

In the recent priority system, high-priority packet will be served first and low-priority packet will be served when there isn\`t any high-priority packet in the system. By the way, even high-priority packet can be blocked by HOL (Head of Line) contention in the input queueing System. Therefore, the whole switching performance can be improved by serving low-priority packet even though high-priority packet is blocked. In this paper, we study the performance of preemptive priority in an input queueing switch for high speed switch system. The analysis of this switching system is taken into account of the influence of priority scheduling and the window scheme for head-of-line contention. We derive queue length distribution, delay and maximum throughput for the switching system based on these control schemes. Because of the service dependencies between inputs, an exact analysis of this switching system is intractable. Consequently, we provide an approximate analysis based on some independence assumption and the flow conservation rule. We use an equivalent queueing system to estimate the service capability seen by each input. In case of the preemptive priority policy without considering a window scheme, we extend the approximation technique used by Chen and Guerin [1] to obtain more accurate results. Moreover, we also propose newly a window scheme that is appropriate for the preemptive priority switching system in view of implementation and operation. It can improve the total system throughput and delay performance of low priority packets. We also analyze this window scheme using an equivalent queueing system and compare the performance results with that without the window scheme. Numerical results are compared with simulations.