• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.543-552
• /
• 2002

Wireless Session Protocol(WSP) which was updated and supplemented based on HyperText Transfer Protocol(HTTP) was designed by Wireless Application Protocol(WAP) forum regarding the characteristics of wireless environment. WSP improved the performance in wireless network, and introduced various facilities considering wireless environment. In this paper, we more improve the performance of WSP adding protocol message compression capability; we cail improved WSP protocol as WSP+. And, we analysis the performance of each protocol with WSP and WSP+ implementation. As a result of experiment, the capability which proposed in this paper reduced a response traffic about 45%. In $10^{-4}$ bit error rate, we also found the packet loss rate and time delay per transaction of WSP+ was improved over 40%. Finally, we found that the protocol message compression capability reduces message retransmission count in transaction layer and shorten the delay time per transaction by reducing a message size.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.281-288
• /
• 2008

Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3834-3857
• /
• 2021

The design of cluster-based routing protocols is necessary for Wireless Sensor Networks (WSN). But, due to the lack of features, the traditional methods face issues, especially on unbalanced energy consumption of routing protocol. This work focuses on enhancing the security and energy efficiency of the system by proposing Energy Efficient Based Secure Routing Protocol (EESRP) which integrates trust management, optimization algorithm and key management. Initially, the locations of the deployed nodes are calculated along with their trust values. Here, packet transfer is maintained securely by compiling a Digital Signature Algorithm (DSA) and Elliptic Curve Cryptography (ECC) approach. Finally, trust, key, location and energy parameters are incorporated in Particle Swarm Optimization (PSO) and meta-heuristic based Harmony Search (HS) method to find the secure shortest path. Our results show that the energy consumption of the proposed approach is 1.06mJ during the transmission mode, and 8.69 mJ during the receive mode which is lower than the existing approaches. The average throughput and the average PDR for the attacks are also high with 72 and 62.5 respectively. The significance of the research is its ability to improve the performance metrics of existing work by combining the advantages of different approaches. After simulating the model, the results have been validated with conventional methods with respect to the number of live nodes, energy efficiency, network lifetime, packet loss rate, scalability, and energy consumption of routing protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.975-983
• /
• 2012

Multi network interface has become common phenomenon for mobile devices such as smart phone which has 3G, LTE-advanced, WiFi. Consequently, there are researches for a transmission strategies using multiple paths below on end-to-end connection. MPTCP which is proposed and being standardized by the IETF as a new transport protocol can perform concurrent multipath transfer using multiple network interfaces. However, current MPTCP has performance degradation when it use heterogeneous networks which have quite different network characteristics. Therefore, this paper proposes the packet scheduling scheme and receiver-based recovery scheme to reduce the performance degradation due to reordering problem. Also, simulation results show that the proposed scheme can improve throughput and retransmission performance.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.349-360
• /
• 2002

In ITU H.323 teleconference system, the RTP/RTCP protocol is offered to transfer real-time multimedia stream. Both sender and receiver hate experience in packet loss and jitter which result from network congestion over Internet. Audio quality over Internet depends on the number of lost packets and on jitter between successive packets. The goal of our study is to improve the speech quality over Internet by checking the packet loss characteristics of the network and adopting the but for control management mechanism at the receiver. We suggest a dynamic redundant audio transmission mechanism which examines the packet loss rate and uses the feedback information through RTCP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.96-103
• /
• 2000

The voice traffic is one of the most important real-time objects in WATM(Wireless Asynchronous Transfer Mode) networks. In this paper, we propose a new MAC(Medium Access'Control) protocol for the efficienttransmission of voice traffic over WATM networks in the multimedia environment and compare the performanceto existing similar protocols. The new protocol separates the reservation slot period for voice and that for data toguarantee some level of QoS(Quality of Service) in voice traffic. This is denoted by a slot assignment functiondepending on the frame size. According to the characteristics of voice traffic which is repeatedly in silent states,the protocol allocates voice reservation request slots dynamically with respect to the number of silent(off state)voice sources and also sends the first block of talkspurt restarted after silent period with a reservation requestslot to reduce the access delay.The simulation results show that the proposed protocol has better performance than Slotted Aloha in bandwidthefficiency, and can serve a certain level of QoS by the given slot assignment function even when the number ofvoice terminals varies dynamically. This means we can observe that the new MAC protocol is much better thanthe NC-PRMA(None Collision-Packet Reservation Multiple Access) protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.771-775
• /
• 2002

멀티미디어 데이터의 효과적인 네트워크 전송에 대한 연구와 투자가 계속적으로 증가하고 있다. 본 논문에서는 실시간 전송 프로토콜인 RTP(Real-time Transfer Protocol)를 기반으로 MPEG 오디오 데이터를 실시간 전송하기 위한 PAD(Packet Assembler/Disassembler) 모듈을 설계, 구현하였다. RTP 기반 MPEG 오디오의 PAD 구현 방법은 MPEG 오디오의 계층에 관계없이 전송하는 방법과 MPEG Layer-3에 특화된 방법 등의 두 가지 방법이 있으며, 본 논문에서는 범용성을 중시하여 전자의 방식을 채택, 구현하였다. 구현한 PAD 모듈은 MPEG-1 및 MPEG-2 오디오 포맷을 지원한다.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.229-237
• /
• 2005

One of the important issues of in this research is effective usage of energy to increase life time of nodes which form a network. Existing LEEM protocol causes unnecessary active time due to small packets with shorter transfer time than active interval period of node and packets with transfer time of more than twice of active interval period of node. In this paper, we propose Energy-Efficient MAC by Reservation (EEMR) protocol which can increase energy effectiveness in wireless sensor network environment by reducing unnecessary active time using a method that reserves next-hop depend upon the size of packet. We evaluated effectiveness of our proposed method through experiments. The result showed that using EEMR protocol had better energy effectiveness than existing LEEM protocol by 15%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.577-585
• /
• 2004

System Packet Interface Level 4 Phase(SPI-4.2) is an interface for packet and cell transfer between a physical layer(PHY) device and a link layer device, for aggregate bandwidths of OC-192 ATM and Packet Over Sonet/SDH(POS), as well as 10Gbps Ethernet applications. In this paper, we performs the research for SPI-4.2. Also we analyze the performance of SPI-4.2 interface module after modeling using C programming language. This paper shows that SPI-4.2 interface module with 512-word FIFO depth is able to be adapted for the offered loads to 97％ in random uniform traffic and 94％ in bursty traffic with bursty length 32. SPI-4.2 interface module can experience an performance degradation due to heavy overhead when it massively receives small size packets less than 14-byte. SPI-4.2 interface module is suited for line cards in gigabit/terabit routers, and optical cross-connect switches, and SONET/SDH-based transmission systems.