• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.586-593
• /
• 1998

In recent automotive industries there has been significant increase in applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles. Enhancement of die quality and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However to successfully apply the result of simulation by a commercial package to the die manufacturing development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcoming of available sheet metal forming softwares. Based on the results of numerical analysis of front door outer panel forming. this paper evaluates the applicability of simulation results to the real die manufacturing for automotive body panels. Also it attempts to select an optimal die manufacturing process including design machining and tryout. Lastly it discusses the expected effects by adopt-ing the selected process in a real stamping die manufacturing facility.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.77-83
• /
• 1996

Noise control process of an air intake system for a four-cylinder automotive engine is described. The objective of the process is reduction of induction noise without losing engine performance and changing package layout. The theory and feasibility for noise control elements are also discussed. In general, four-cylinder engines generate a lower frequency induction noise around 80-150 Hz (2400-4500 rpm) and firing frequency, valve impact noise are the main sources. In this paper, the most problematic noise source is identified first and better position of air inlet is selected between inside-fender and out-of-fender layouts. Secondly, the possible noise control approach and CAE analysis results are compared to those from speaker excitation tests. Finally, the effect of the controlled intake system after the installation to an automobile is presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.171-179
• /
• 1994

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implemen- tation details (such as robot selection, accessory design, and spatial layout) together with operation details, the computer aided design and analysis method should be sought. However, conventional robotic design systems and off-line programming systems cannot accommodate these inquiries in a unified fashion. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL (Simulation Package for Robotic Painting Line) users can design the painting objects (via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workpace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS).

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.38-44
• /
• 1999

In this paper, we have constructed a self-diagnostic circuit which could detect erroneous signals in most cases that a eight-beam piezoresistive accelerometer were destroyed more than its one beam. To confirm the function of the circuit, PSPICE simulation was carried out. An IC chip was fabricated with a layout of KA 324 amplifier using a bipolar standard processing. After a package of the chip was sealed using a plastic package with 24 pins, the self-diagnostic characteristics were investigated. Then, the measured self-diagnostic characteristics of the circuit were compared with the PSPICE simulated result.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.75-79
• /
• 2013

Demands for semiconductor devices are dramatically increasing, and advancements in fabrication technology are allowing a step-up in the number of devices per unit area. As a result, semiconductor devices require higher heat dissipation, and thus, cooling solutions have become important for guaranteeing their operational reliability. In particular, in chip-in-board packages, in which chips and passives are embedded in the substrates for efficient device layout, heat dissipation is of greater importance. In this study, a thermal model for layers of different materials has been proposed, and then, the heat transfer has been simulated by imposing a set of appropriate boundary conditions. Heat generation can be predicted based on the results, which will be utilized as practical data for actual package design.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.107-116
• /
• 2004

In the modern society, magazine is a information communicating media which is an important element in assessing the whole of a nation's cultural standard. More subdivided fields of magazines are expanding according to the diversified concepts. As the variety of Korean edition of foreign magazines are increasing, the type of Women's magazines are also diversifying and expanding. By finding out the problems and analyzing the visual side of domestic women's magazines among the intense competition of the magazines, the design improvement program was requested. The analysis result from the visual side of domestic women's magazines tells us that the problem of current domestic women's magazines is that their identities are not clear. The cause can be divided into three reasons: First, it is the lack of creativity and originality. There is a limitation in arousing the readers' interests by designing the magazines with similar layouts. Second, there are no distinct design concepts in the magazines. It seems as if the uniformity is lacked as the impression the magazine gives is not clear. The diversification of layouts and the use of design elements could actually bring about a counter result. Third, the excessive advertisement pages is another reason. The ads that covers over 35% of the whole of the magazine can act as a factor that drops the readers' trust in the magazine.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.2
• /
• pp.105-108
• /
• 2013

Drivers' sitting strategies are considered in car seat design. Existing research has identified representative sitting strategies by visual inspection of seating pressure measurements collected from a small sample size of drivers. The present study recruited 20 female and 20 male participants, measured seating pressure, and classified sitting strategies by cluster analysis. The participants' sitting postures were classified based on seating pressure distribution into mid-back and scapular, mid-back and lumbar, and lumbar sitting strategies for the upper body and hip concentrated, hip and mid-thigh concentrated, and hip and mid-thigh distributed sitting strategies for the lower body. The effects of gender and occupant package layout (OPL) on sitting strategy were nout found significant. The identified sitting strategies would be of use for the design and evaluation of an OPL and a seat.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.231-242
• /
• 2007

As railroad industry faces the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high-speed long-distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for regular operations of the example maintenance center are developed. In this study, standard maintenance procedures, layout, equipments, and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. After simulation, four types of observations are analyzed. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Third, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared. Lastly, the simulation results according to worker's working coverage shows expanding the worker's coverage decreases the cycle time and increases throughput per train. However, workers are to be fully trained to do multiple skill work.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1129-1135
• /
• 1993

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implementation details(such as robot selection, accessory design, and spatial layout) together with operation details, a computerized method should be sought. However, any conventional robotic design system and off-line programming system cannot accomodate such a need. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL(Simulation Package for Robotic Painting Line) users can design the painting objects(via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workspace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS). By iterative design and evaluation procedure, a feasible and efficient robotic design can be attained. As the developed system has motion planning and analysis features, it can be also used as an off-line robot programming system in operation stage. Including the details of each module, this paper also presents a case study made for an actual painting line.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.33-37
• /
• 2010

This study was aimed at developing 1) iso-perception maps for various groups of drivers in terms of age, gender, and anthropometry and 2) the experiment framework required for obtaining subjective and objective measures. A total of 9 maps, which describe drivers' perceptions regarding their static behaviors inside a typical mid-size sedan, can be used to improve the utilization of the limited driver workspace, and to select better design alternatives for occupant packaging. An adjustable seating buck, $a^{***}$-camera motion capture system (Vicon), and $a^{**}$-channel EMG system were used for the experiment. Each iso-perception map was developed while H-PT, steering wheel center, or TGS knob center was moved to each of pre-defined positions relative to driver-selected positions. Adjustable ranges or positions of the seat, steering wheel, and TGS lever described in iso-perception maps can be used to determine better package layout alternatives.