• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.101-106
• /
• 1999

Pb$(Zr_{0.5},Ti_{0.5})O_3$ 박막을 $Pt/Ti/SiO_2/Si$ 기판 위에 spin-coating법으로 제조하였다. 제조된 sol을 초음파 bath 내에서 초음파 처리하여 균일화를 촉진시킨 다음, 박막을 제조하여 초음파 처리되지 않은 sol로 제조된 박막과의 비교를 통해 초음파의 영향을 고찰하였다. 초음파 처리된 sol로 제조된 박막의 경우, $550^{\circ}C$에서 perovskite 단일상을 얻을 수 있었고, "rosette" 구조가 사라졌음을 관찰할 수 있엇따. 초음파 처리되지 않은 sol로 제조된 박막의 유전상수(10kHz), 잔류분극(Pr) 및 항전계(Ec) 값은 335, 12.3$\mu$C/$\textrm{cm}^2$, 168.4 kV/cm 였고, 초음파 처리된 sol로 제조된 박막은 각각 443, 172$\mu$C/$\textrm{cm}^2$, 153,5kVcm 로 전기적 특성이 개선되어 졌음을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 창립10주년 제20회 학술발표회
• /
• pp.61-62
• /
• 2001

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.151.2-151.2
• /
• 2000

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1022-1024
• /
• 1995

In this study, $Pb(Zr_xTi_{1-x})O_3$(x=0.65, 0.52, 0.35) thin films were fabricated by Sol-Gel method. A stock solution with excess Pb 10[mol.%] of $Pb(Zr_xTi_{1-x})O_3$ was made and spin-coated on the Pt/$SiO_2$/Si substrate at 4000[rpm] for 30[sec.]. Coated specimens were dried on the hot-plate at $400[^{\circ}C]$ for 10[min.]. Sintering temperature and time were $500{\sim}800[^{\circ}C]$ and $1{\sim}60$[min.]. To investigate crystallization condition, PZT thin films were analyzed with sintering temperature, time and composition by the XRD. The microstructure of thin films were investigated by SEM. The ferroelectric perovskite phases precipitated under the sintering of $700[^{\circ}C]$ for 1 hour. In the PZT(52/48) composition, dielectric constant and dielectric loss were 2133, 2.2[%] at room temperature, respectively.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1054-1059
• /
• 2002

A great deal of research has been done in the field of characterization for piezoelectric thin films after the first report on the measurement for the piezoelectric coefficient of thin films in 1990. The main idea of this research is to provide a distinctive solution for the measurement and standardization of both the longitudinal and the transverse piezoelectric d-coefficients, d33 and d31, of ferroelectric thin films. In general, to get these two coefficients of thin films, two different measuring systems are required. Here, we propose the improved method for the evaluation of these two coefficients with single equipment and with the relatively convenient procedure. The two-step loading process of applying the both positive and the negative pressure has been introduced to acquire the piezoelectric coefficients. These results have been calibrated for both the longitudinal and 4he transverse piezoelectric d-coefficients, d33 and 431, of thin films by comparison with the virtual standard created from FEM. In this experiments, we have obtained d33 of 331pC/N and 031 of -92.2pC/N for the PZT thin films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.239-241
• /
• 1987

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.341-345
• /
• 2002

The effect of the Pt electrode and the $Pt-IrO_2$ hybrid electrode on the performance of ferroelectric device was investigated. The modified Pt thin films with non-columnar structure significantly reduced the oxidation of TiN diffusion barrier layer, which rendered it possible to incorporate the simple stacked structure of Pt/TiN/poly-Si plug. When a $Pt-IrO_2$ hybrid electrode is applied, PZT thin film properties are influenced by the thickness and the partial coverage of the electrode layers. The optimized $Pt-IrO_2$ hybrid electrode significantly enhanced the fatigue properties with minimal leakage current.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.392-397
• /
• 2011

The effect of various post-annealing temperature to sputtered Pb(Zr,Ti)$O_3$ (PZT) thin films was investigated. The crystallization process, surface morphology and the electrical characteristics strongly depends on the rapid thermal annealing (RTA). In radio frequency (RF) sputtering methods, there were many papers mostly forcing on the crystal forming and the surface variations with different elements distribution (Pb, Ti, Zr, O) on the surface of the PZT layer. In this experiment, the post-annealing treatment promoted the Pb volatilization in PZT thin film and affected the Ti diffused throughout the Pt layer into the PZT layer. Second ion mass spectroscopy (SIMS) analysis was employed to show that the Pb element in the PZT layer was decreased at the same time the Ti element mass was slight decreased than Pb with increasing RTA temperature. That result prove the content of Pb affect the PZT thin film property.

• 한국진공학회지
• /
• 제15권2호
• /
• pp.173-179
• /
• 2006

Pulsed laser deposition 방법으로 증착한 $PbZr_{0.3}Ti_{0.7}O_{3}$ (PZT)박막의 구조적, 전기적 성질에 대한 연구를 하였다. PZT 박막은 $LaAlO_3$ 기판위에 동일한 조건으로 증착된 $LaMnO_3$ (LMO) 산화물을 하부 전극으로 하여 증착시간을 변화시키며 증착하였다. High-resolution x-ray diffraction 결과를 통해 LMO 하부 전극과 PZT 박막이 방향성 있게 자란 것을 확인할 수 있었고 박막의 두께는 field-emission scanning electron microscope을 통하여 측정할 수 있었다. 또한 우리는 atomic force microscopy을 이용하여 박막의 표면 거칠기를 구하였고 국소적인 범위의 전기적 특성은 piezoelectric force microscopy 모드를 이용하여 측정하였다. 그 결과 PZT/LMO 구조는 나노 스토리지의 미디어로 쓰이기 위해 필요한 성질들을 갖추었음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.327-329
• /
• 2005

Pb(Zr/sub 0.52/Ti/sub 0.48/)O₃(PZT) thin films were deposited by using a pulsed laser deposition method on a Pt/Ti/SiO₂/Si substrate with (Pb/sub 0.72/La/sub 0.28/)Ti/sub 0.93/O₃ (PLT) buffer and on a Pt/Ti/SiO₂/Si substrate without buffer. These films were annealed in H₂-contained ambient for 30 minutes at the substrate temperature of 400。C to evaluate the forming gas annealing effects. The comparative studies on the ferroelectric properties of these two films were carried out, which are shown that ferroelectric properties, such as remanent polarization didn't change in the case of PLT buffered PZT film while remanent polarization value of PZT film degraded from 20.8 C/㎠ to 7.3 C/㎠. The leakage current became higher in both cases, but that of the more-oriented PZT film had the moderate value of the 10/sup -6/ order of A/㎠. This is mainly because the hydrogen atoms which make the degradation of PZT films cannot infiltrate into the more -oriented PZT film as well as the less-oriented PZT film.