• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.128-139
• /
• 1999

This paper proposes a linearization technique for the space vector modulation method, which increases the linear control range of inverter up to the 6-step inverter. This method is based on fourier series expansion of the desired output voltage of the inverter to calculate the compensation angle in continuous switching mode and holding angle in discontinuous switching including the 6-step mode respectively. The approximation equation of these angles are used for compensation of fundamental voltage in overmodulation range. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.386-398
• /
• 1987

This paper is proposed the Suboptimal PAWM(Pulse Amplitude Width Modulation) for minimize harmonic effects generated by switching operation of PWM Inverter. This strategy determine one switching pattern at a fixed point(fundamental) voltage u1=1.2) which THD(Total Harmonic Distortion) are minimized in the suboptimal PWM strategy, and controls only frequency in the inverter while voltage control is carried out by DC Chopper in the DC Link. This strategy is applied at VSD(Variable Speed Drive) of Three phase induction moter, and acoustic noise of motor, line to line voltage and current of inverter, current harmonic spectrum was estimated and also compared with other switching strategy. From the results, the validity of this strategy can be verified.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.85-87
• /
• 2008

The demand of a three phase PWM inverter for the purpose of power control or grid-connecting is increasing. This inverter is connected to a grid through an L-filter or LCL-filter to reduce the harmonics caused by switching. An LCL-filter can reduce the harmonic of a low switching frequency and generate a satisfactory level of grid side current with a relatively low-inductance than an L-filter. But the additional poles caused by the LC part affects a stability problem due to induced resonance of the system. This paper presents a compensation method using a power theory to improve performance, the designed LCL-filter system and to reduce the stability problems caused by resonance. The effectiveness of the proposed algorithm is verified by simulations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.419-427
• /
• 2016

This paper proposes a design method of LCL-filter for a grid-connected three-phase inverter using a discontinuous PWM (DPWM) method. When using a DPWM method, many harmonic voltages are generated in the inverter output compared to a continuous PWM (CPWM) method. Therefore, an optimized grid-connected filter design is required for a DPWM method. The proposed design method provides generalized formula to design accurate LCL-filter without trial and error procedures. An inverter side inductance is designed by analyzing the current ripple injected to the grid. The Optimized parameters of LCL-filter can be designed by analyzing the total harmonic distortion (THD) and the ripple attenuation factor of the output current. The proposed LCL filter design method is demonstrated by simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2002

In this paper the space voltage vector pulsewidth modulation(SVPWM) technique for two-phase inverter is proposed. The two-phase SVPWM technique is applicable to two-phase induction motor drives. The two-phase inverter using two-phase SVPWM technique cannot generate zero voltage vectors, but four space vectors. A reference voltage vector in the square locus is realized by adjusting four space vectors. The switching sequence "two-phase symmetrical modulation" used in two-phase SVPWM is proposed. Practical verification of theoretical predictions is presented to conform the capabilities of the new technique.technique.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.171-174
• /
• 2002

This paper deals with a novel method in order to analyze the harmonic characteristics in the multi-level inverter. Generally, the magnitude of harmonic components is different according to the carrier PWM techniques, modulation Index(Mi), and the level of multi-level inverter The previous papers analyzed the harmonic characteristics from the viewpoint of the space vector. Hence, the calculation of the harmonic vector becomes difficult and complex in 4-level or more than S-level. However, the proposed method of this paper reduced an amount of calculation and simplified the process of calculation by using the relationship between reference voltage and output phase voltage to load neutral. This paper analyzed the harmonic and it is applied to the multi-carrier PWM techniques in 5- level and other-level of cascaded inverter system.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1515-1517
• /
• 2005

In this paper, we represent both occurrence reason of Surge-voltage and Leakage-current of AC drive system which is operated by Voltage-type PWM Inverter. It generates a compensating voltage which has the same amplitude as, but the opposite phase to, the common-mode voltage produced by the PWM inverter. The compensating voltage is superimposed on the inverter output by a common-mode transformer. As a result, the common-mode voltage applied to the load is canceled completely. The design method of the active common-mode noise canceler is also presented in detail. Therefore, we try to describe the method controling both of them and all of the proprieties are proved by our experiment.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.76-82
• /
• 2005

A novel variant of full multi-modulation applications to diode-clamped and cascade multilevel inverter-termed single carrier multi-modulation is presented. The proposed PWM-technique is advantageous for its simple implementation. The correlation between multi-carrier and single-carrier multi-modulations is deduced. For the PWM methods, a mathematical model of voltage source inverter and general algorithm for the multi-modulating modulator are proposed. The theory is demonstrated by simulation results

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.466-470
• /
• 1991

In this paper, full bridge inverter with IGBT is proposed. By Controlling phase angle difference between 2 arms, PWM controlled high frequency link inverter has VVVF capability. For the simplicity, flexibility and compactness of control circuit, 16 bit single chip microcontroller 8797 BH is used and its characteristic is examined through experiment.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.443-447
• /
• 1999

The AC drive systems of a voltage source inverter and an induction motor. The inverter non linearity caused by the turn on/off time dependency of the current level in the switching IGBT is described in the first part of this paper. To improve the low-speed drive characteristics, accurate applied voltage calculation is proposed under considerations of the compensations for the quantization error in the digital controller, the forward voltage drop of switching drives and the dead time of the inverter. The experimental studies show the improved drive characteristics.