• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.296-300
• /
• 1989

The paper proposes a method to eliminate harmonics of PWM inverter fed induction motor system using Walsh series. In other words, this paper presents technique of the selective harmonics elimination(SHE) by W-FT series in three phase PWM inverter output waveform. A microprocessor(8086 CPU) - controlled three phase induction motor system in order to verify this algorithm is present. It is designed for a three output voltage in the 1$\sim$60 Hz inverter with the 5th and 7th harmonics, 5th, 7th, 11th, and 13th, harmonics eliminated, and with the fundamental wave amplitude proportional to the output frequency. In the PWM inverter, dead time circuit is inserted in the switching si gnats to prevent the de link shortage. This paper is deals with quantative prediction of dead-time effect and its compensation in PWM inverters. The performance of the compensation circuits is confirmed by the experiment.

• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.138-147
• /
• 1998

본 논문에서는 구현이 간단하고 강인한 제어특성을 갖는 퍼지제어를 이용하여, 연속적으로 부하와 속도지령이 변하는 전기자동차 구동용 유도전동기가 부하에 무관하게 지령속도를 추종할 수 있는 제어기를 구성하고자 한다. 그리고 유도전동기를 구동하기 위한 PWM(Pulse Width Modulation)파형은 최대출력전압이 높고 디지털구현이 용이한 공간전압벡터 변조법을 이용하여 생성하였다. 제안된 시스템이 빠르고 외란에 강할 뿐만 아니라, 지령 속도에 잘 추종함을 확인할 수 있었다. 따라서 연속적으로 속도지령이 변하고 부하변동을 갖으며, 외란의 영향을 받기 쉬운 전기 자동차의 구동장치에 제안된 퍼지 제어기의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.531-540
• /
• 2014

A novel carrier-based PWM (CBPWM) strategy of a three-level NPC converter is proposed in this paper. The novel strategy can eliminate the low-frequency neutral point (NP) voltage oscillation under the entire modulation index and full power factor. The basic principle of the novel strategy is introduced. The internal modulation wave relationship between the novel CBPWM strategy and traditional SPWM strategy is also studied. All 64 modulation wave solutions of the CBPWM strategy are derived. Furthermore, the proposed CBPWM strategy is compared with traditional SPWM strategy regarding the output phase voltage THD characteristics, DC voltage utilization ratio, and device switching losses. Comparison results show that the proposed strategy does not cause NP voltage oscillation. As a result, no low-frequency harmonics occur on output line-to-line voltage and phase current. The novel strategy also has higher DC voltage utilization ratio (15.47% higher than that of SPWM strategy), whereas it causes larger device switching losses (4/3 times of SPWM strategy). The effectiveness of the proposed modulation strategy is verified by simulation and experiment results.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.80-86
• /
• 2012

The high-voltage pulse generator is consist of transformers of fundamental wave and harmonic waves, and shunt capacitances. The pulse has the fundamental wave and the harmonic waves that have been increased as a series circuit by the transformers to make high voltage pulse. This paper shows the high-voltage pulse generator simulation using a circuit program with experiment data. In the equivalent circuit, magnetized inductances and loss resistances which affect output voltage, have been obtained. The output capacitor circuits have characteristics of band pass. The output voltages of the pulse width 50% and 25%(PWM) were obtained. The output of the high-voltage pulse generator is 2.5kHz, 1.8kV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.927-929
• /
• 2001

Induction Motor fed by PWM inverter generates the sound and the vibration because of harmonic current and magnetic force characteristics. This paper is investigated the harmonic frequency and noise characteristics of the current and the torque of the induction motor when the input voltage is excited as the sine wave or PWM wave. The performance characteristics of induction motor is analyzed by the F.E.M and the theoretical method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.169-171
• /
• 2006

Nowadays, inverter welding is risen in spot welding, because can secure productivity. This study made changed output wave form of inverter welding equipment by several forms and measured electric current that pass to the second of transformer for welding. Purpose of study is finding electric current of most suitable form. Also, studied applies PID control in electric current control of inverter resistance weld device and heightens electric current precision.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.543-546
• /
• 1987

Trapezoidal wave is suitable for the modulating signal of the microcomputer based PWM inverter for the use of motor drives because the switching patterns can be generated by means of on-line computation. In this paper, the output waveform of three-level modulation inverters for the trapezoidal modulating signal is investigated both theoretically and experimentally.

• ETRI Journal
• /
• 제6권4호
• /
• pp.21-30
• /
• 1984

A new control strategy for a PWM inverter with instantaneous feedback is suggested, theoretically analyzed and verified through simulations. This control gives excellent results under various load conditions.

• 유공압시스템학회논문집
• /
• 제2권2호
• /
• pp.8-13
• /
• 2005

This paper investigates a fast, accurate and inexpensive hydraulic motor speed control system using high speed on-off solenoid valves. In order to retain the advantages of the two position valve and obtain better performance, the valves are operated by pulse width modulation(PWM) control. PWM signal is generated from a LabWIEW program in microcomputer in order to set up various duty ratio and frequency of carrier wave in PWM signal with varying system parameters. As the results of experiments, the speed control of a hydraulic motor was successfully implemented using on-off solenoid valves. In order to attenuate the pressure ripple and speed variation due to discontinuously controlled flow through the on-off valves, a resonator hose fabricated for automobile power steering system was connected between the valve and a hydraulic motor. From experimental results obtained in the hydraulic motor system with a resonator hose, it was ascertained that the resonator hose showed excellent performances in reducing pressure ripple and motor speed variation.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.268-274
• /
• 1999

일반적으로 컨버터 장치로서 사용되고 있는 전력용 반도체 소자인 SCR이나 diode를 사용할 때 역률과 고조파의 문제를 야기 시킨다. 이러한 문제점을 해결하기 위해 자기소호형 소자인 IGBT등을 사용하여 입력측 선전류를 입력 전원전압과 동상인 정현파 전류로 유지함으로써 역률과 고조파에 대한 문제를 해결 하였다. 본 논문에서는 컨버터 출력측 직류전압 제어기에 부하전류 전향보상기(feedforward compensator)를 부가하여 출력측에 다이오드 정류기가 부가된 단상 전압형 인버터를 부하로 사용하여 보상기 부가에 따른 과도상태특성을 개선하였으며 전압형 PWM 컨버터 제어에 의한 특성을 시뮬레이션 및 실험 결과를 통하여 확인 하였다.