• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.579-586
• /
• 2013

Poly(vinyl alcohol)(PVA) nanocomposite films containing various saponite (SPT) clay contents were synthesized using a solution intercalation method. The thermal property, morphology, optical transparency, and gas permeability of the PVA nanocomposite films with various SPT contents in the range of 0 to 10 wt% were examined. PVA nanocomposite film containing 5 wt% SPT showed excellent thermal and gas barrier property. The hybrid films containing 5 wt% SPT were equibiaxially stretched with stretching ratios ranging from 150 to 250%. The clay dispersion, optical transparency, and gas permeability were also examined as a function of equibiaxial stretching ratio. The PVA nanocomposite films with various equibiaxial stretching ratios showed excellent optical transparency and barrier to oxygen permeability.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.3
• /
• pp.198-202
• /
• 2000

PVA blend films were prepared by solution blending method for the purpose of useful antibiotic polymers. Characteristics properties of blending films such as elongation and tensile strength were determined. Tensile strength and elongation were rapidly reduced as increasing the blending ratio of natural polymer. Blend films were found that phase separation was occured as more than 25wt% increasing the blend ratio of chitosan. Also, The antibiotics of blend films were examined against gram(+) and gram(-) by disk susceptibility test. As a result, kind of blending films to show the highest antibiotics was chitosan 20wt% and the selectivity of mold strain was observed.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.189-193
• /
• 2008

Thermal cross-linking method of poly(vinyl alcohol) (PVA) using poly(acrylic acid) (PAA) was carried out on PVA/PAA hydrogels. The level of gelation was measured in the PVA/PAA hydrogels with various PAA contents. The swelling behavior at various pHs showed that the swelling kinetics and water contents of the PVA/PAA hydrogels reached equilibrium after 30 h, and the time to reach the equilibrium state decreased with increasing PAA content in the hydrogel. The water content increased with increasing pH of the buffer solution. The permeation and release of the drug were tested using indomethacin as a model drug. The permeated and released amounts of the drug increased with decreasing the PAA content because of the low free volume in the hydrogel due to the higher cross-linking density. The kinetic profile of drug release at various pHs showed that all samples reached the equilibrium state within the 5 h.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.461-468
• /
• 2018

Microspheres were prepared by solvent-evaporation method with Poly-L-lactic acid (PLLA) as a starting material, and the effects of preparation variables on microsphere shape and average particle size were investigated. As the concentration of PVA solution increased from 1 to 5 wt%, the average particle size decreased from $370{\mu}m$ to $160{\mu}m$ and then increased to $240{\mu}m$ at 7 wt%. On the other hand, As the addition volume of PVA solution increased from 10 mL to 50 mL, the average particle size decreased from $370{\mu}m$ to $220{\mu}m$. Also, as the stirring speed increased from 500 rpm to 1,500 rpm, the average particle size decreased from $370{\mu}m$ to $110{\mu}m$. When dichloromethane and chloroform were used as organic solvents, respectively, the average particle size did not show any significant difference. However, when dichloromethane was used, voids were observed on the particle surface, but when chloroform was used, smooth spherical particles were obtained.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.123-129
• /
• 1995

For the propose of increasing the value added, zeolite powder was granulated by adding Polyvinyl Alcohol (PVA) as cementing material. The optimal concentration of PVA for granulation and the physical properties of the prepared granule were investigated. Four percent PVA stock solution was made by adding distilled water at $90^{\circ}C$ water bath and incorporated with zeolite. The contents of water stable granule above 2.0mm in diameter was 98.0% in the case of 0.3% PVA addition and almost 100% in the case of 0.6% PVA addition. Increasing PVA concentration of granules increased the hardness and decreased the infiltration rate and the maximum water holding capacity of granules, However, the drying method hardly affected the physical properties of granules. With the increase in the mixing ratios of kaolinite or bentonite to zeolite, the hardness of granules increased but high water contents of granules resulted in rapid decrease in the hardness of granules. However, when smectite or perlite was mixed with zeolite, the increase in mixing ratios to zeolite resulted in the decrease in hardness, the increase in the infilteration rate and maximum water holding capacity of granules.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.48-54
• /
• 2013

A laboratory study was carried out to recover KI crystals with high purity by using fractional crystallization method from a waste solution generated from the production of polarizing film for LCD industry. The waste solution contains 1.3% KI, and other impurities such as B, Na, and PVA etc. With purity higher than 99.5% KI crystals were produced through refining process such as vacuum evaporation, fractional crystallization, filtering, and 24hr aging. Also the concentrated impurities were eliminated about 70% by recrystallization.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.155-164
• /
• 2005

The characteristics of sintering for Mullite-Cordierite (MC) composites and the effect of $TiO_2$ addition were studied. The MC composites were manufactured by a solution-polymerization method using PVA as a polymer carrier, and $TiO_2$ was used as a sintering agent. They were calcined at $1300^{\circ}C$, planetary milled for 4 h and sintered at $1450^{\circ}C$. As cordierite content increased, relative density of materials was increased up to $98\%$ and sinterability was improved. In case of $50\;wt\%$ mullite/$5\;wt\%$ cordierite composition sintered for 16 h, the flexural strength and thermal expansion coefficient were 190 MPa and $3.07{\times}0^{-6}/^{\circ}C$, respectively. However, mechanical properties were decreased with the cordierite contents higher than $50\;wt\%$ because of the excess liquid-phase amount. As the addition of $TiO_2$ is increased, columnar crystal of mullite and liquid-phase contents were increased. In particular, the flexural strength and thermal expansion coefficient decreased in case of $5\;wt\%\;TiO_2$ addition.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.63-69
• /
• 2008

The mechanical properties and morphologies of cellulose blends with two different additives were compared. Poly (vinyl alcohol) (PVA) of ethylene glycol (EG) were used as additives in the formation of cellulose blends through the solution blending. The properties of blends were varied with the additive content in the polymer matrix. The ultimate tensile strength and initial modulus of the cellulose blends were highest for a blend PVA content of 30 wt% and for a blend EG content of 10 wt%, respectively. Ternary blended systems of composition of cellulose/PVA (70/30=w/w)/EG were also prepared by the solution blending method with different EG contents. The mechanical properties of these systems were found to be optimal for EG contents of up to 40 wt%. The mechanical properties of the cellulose ternary blend films were superior to those of the cellulose binary blend films. The oxygen permeability transmission rate ($O_2TR$) monotonically decreased with increasing EG content in the ternary blend films. Overall, the mechanical properties of the cellulose blend films were found to be better than those of pure cellulose films.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.317-322
• /
• 1999

Transparent films were prepared using the sol-gel process by mixing TEOS with PVA solution that was solved in EtOH and distilled water homogeneously. HCl, $CH_3COOH$ and $NH_4OH$ were used as catalysts of the sol-gel process, and for improving the flexibility of films glycerol was used as plasticizer. In case of each catalyst, transparency and tensile strength were increased, and glass transition temperature (Tg) was shifted to higher temperature with increasing TEOS ratio. Also, in case of adding the plasticizer, the flexibility of films was increased. On the contrary, transparency, thermal stability and tensile strength were decreased with increasing HCl and $NH_4OH$ ratio. Also, the range of being made of film type was expanded when $CH_3COOH$ was used than HCl and $NH_4OH$.