• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.417-422
• /
• 1999

Algin and chitosan are known as biodegradable natural polymers. PVA is useful for the production of water soluble packaging, paper, textile sizes. PVA/Algin and PVA/chitosan films were prepared by solution blends method in the weight ratio of chitosan, algin for the purpose of useful biodegradable films. Thermal and mechanical properties of blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan films were similar to PVA at thermal and mechanical properties. PVA/Algin films were found that phase separation was occured as more than 25wt% increasing the blend ratio of algin. PVA/Algin films were observed to be less partially compatibility than 10wt% increasing the blend ratio of algin by DSC, mechanical properties and SEM. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, they were rapidly degraded in the enzyme( glucosidase) solution better than pH solution by enzymolysis.

• 멤브레인
• /
• 제14권2호
• /
• pp.117-125
• /
• 2004

본 연구는 직접메탄을 연료전지(Direct Methanol Fuel Cell)에 적용가능한 양이온교환막 개발에 관한 것으로 PVA/PAM/ZrP 막을 제조하여 PAM, ZrP의 함량 및 농도 변화에 따른 막의 특성을 연구하였다. PVA/PAM/ZrP 막은 PVA에 가교제인 PAM의 함량을 7∼11 wt%로 증가시켜 제조하였으며 그 각각의 막에 8$0^{\circ}C$에서 zirconyl chloride와 Phosphoric acid solution에 침적시켜 제조하였다. ZrP의 농도를 1, 2 M로 변화시켜 메탄을 투과도, 이온전도도, 함수율 및 이온교환용량을 측정하였다. PVA/PAM/ZrP 막의 메탄올 투과도는 10/^{-8}∼l0^{-6}$ $\textrm{cm}^2$/sec, 이온전도도는 $10^{-3}~10^{-2}$ S/cm 정도 나타내었으며 함수율은 0.26∼l.17 g $H_2O$/g membrane, 이온교환용량은 2.59∼5.1 meq/g membrane의 결과를 보였는데 이는 PVA/PAM 막과 비교하여 메탄을 투과도, 이온전도도는 각각 18%, 23% 정도 증가한 것으로 관찰되었다.

• 멤브레인
• /
• 제15권1호
• /
• pp.34-43
• /
• 2005

Poly(vinyl alcohol) (PVA)이 폴리술폰 한외여과 막, 술폰화된 폴리에테르술폰, 폴리아미드 나노 막 위에 코팅된 나노 복합막을 가압법에 의해서 제조되었다. PVA는 글루터알데하이드 수용액으로 가교되었다. 모든 지지층위에 PVA 희박용액이 성공적으로 코팅되어 나노복합막이 제조되었다. 지지막 위의 친수화도가 높아짐에 따라 수투과 유량이 증가하였다. 특히 음하전을 띠는 폴리아미드 나노 복합막의 제타전위는 PVA로 코팅함으로서 감소되었다. 막 오염 실험은 양이온을 띠는 계면활성제, 휴민산, 휴민산과 칼슘이온 복합체 및 bovine serum albumin을 사용하여 실행하였다. PVA로 코팅되지 않은 폴리아미드 나노복합막은 각각의 오염물질에 의해서 심하게 오염되었다. 휴민산과 단백질에 의한 오염은 오염물질의 등전점에서 가장 심하게 발생하였다. 휴민산에 이가 양이온을 첨가함으로서 오염이 심각하게 일어났다. PVA 수용액으로 폴리아미드 나노 복합막을 코팅함으로서 막 오염이 감소되었다. PVA로 코팅된 폴리아미드 나노 복합막은 산, 염기용액에 대해 저항성을 보였다.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.21-26
• /
• 1998

Polyvinyl alcohol[PVA] is useful for the production of water-soluble packaging, paper, textile sizes. PVA and Chitosan are known as biodegradable polymers. PVA/chitosan blend films were prepared by solution blends method in the weight ratio of chitosan for the purpose of useful biodegradable films. Thermal and mechanical properties of PVA/chitosan blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan blend films were similar to PVA. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, Blend films were rapidly degraded enzyme(${\beta}-glucosidase$) solution better than pH solution by Enzymolysis.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.86-92
• /
• 1999

The nanofiltration (NF) membranes based on poly(vinyl alcohol) (PVA) and sodium alginate (SA) were prespared. Homogeneous PVA/SA blend membranes were prepared by casting a PVA/SA (95/5 in wi%) mixture solution on an acryl plate followed by drying at a room temperature and by cros-slinking with glutaraldehyde (GA) for 20 minutes PVA/SA blend composite membranes were also prepared by coating a PVA/SA (95/5 in wi%) mixture solution on microporous polysulfone(PSF) supports. The PVA/SA active layer of the composite membrane was crosslinked at room temperature by using an membranes were characterized with a scanning electron microscopy (SEM) a fourier transform infrared spectroscopy (FTIR) and permeation tests. The permeation properties of the composite membrane were as follows: 1.3{{{{ {m }^{2 } }}}}/{{{{ {m }^{2 } }}}}day of flux and >95% of rejection at 200 psi for a 1000 ppm PEG600 solution.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.129-133
• /
• 2008

PVA nanofibers containing silver nanoparticles were prepared by two methods. The first method was electrospinning of irradiated solution. The prepared $PVA/AgNO_3$ solution was irradiated by gamma-rays. And then the irradiated solution was electrospun. The second method was irradiation of electrospun nanofibers. Nanofibers prepared by electrospinning of unirradiated $PVA/AgNO_3$ solution. The morphology of the nanofibers was observed with a SEM, TEM. When the irradiated $PVA/AgNO_3$ solution were electrospun, the average size of the Ag nanoparticles was increased, but their number was decreased.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.45-51
• /
• 2005

Soluble keratose(S-keratose) could be obtained by oxidizing the wool keratin with performic acid. S-keratose/PVA solutions were made by dissolving them in the formic acid and S-keratose/PVA web of sub-micron size was made by electro-spinning technique. SEM, elemental analysis, FT-IR, X-ray diffractometry, and TGA were used to characterize the properties of S-keratose/PVA solutions and fibers. As the S-keratose content in S-keratose/PVA solution increased, viscosity of solution decreased while electrical conductivity has increased. The fiber diameter has decreased with increasing the S-keratose content. S-keratose/PVA ratio in fibers were similar to the ratio in the solutions. The crystalline structures of S-keratose and PVA existed separately in the electrospun webs. Thermal stability of the web increased with the PVA content increasing.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.573-580
• /
• 2020

YAG (Yttrium Aluminum Garnet, Y₃Al₅O₁₂) has excellent plasma resistance and recently has been used as an alternative to Y₂O₃ as a chamber coating material in the semiconductor process. However, due to the presence of an impurity phase and difficulties in synthesis and densification, many studies on YAG are being conducted. In this study, YAG powder is synthesized by an organic-inorganic complex solution synthesis method using PVA polymer. The PVA solution is added to the sol in which the metal nitrate salts are dissolved, and the precursor is calcined into a porous and soft YAG powder. By controlling the molecular weight and the amount of PVA polymer, the effect on the particle size and particle shape of the synthesized YAG powder is evaluated. The sintering behavior of the YAG powder compact according to PVA type and grinding time is studied through an examination of its microstructure. Single phase YAG is synthesized at relatively low temperature of 1,000 ℃ and can be pulverized to sub-micron size by ball milling. In addition, sintered YAG with a relative density of about 98 % is obtained by sintering at 1,650 ℃.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.173-179
• /
• 2018

Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PVA-CC) separators for supercapacitor applications. The PVA-CC separators were fabricated by mixing various ceramic particles including aluminum oxide ($Al_2O_3$), silicon dioxide ($SiO_2$), and titanium dioxide ($TiO_2$) into a PVA aqueous solution. These ceramic particles help to create amorphous regions in the crystalline structure of the polymer matrix to increase the ionic conductivity of PVA. Supercapacitors were assembled using PVA-CC separators with symmetric activated carbon electrodes and electrochemical characterization showed enhanced specific capacitance, rate capability, cycle life, and ionic conductivity. Supercapacitors using the $PVA-TiO_2$ composite separator showed particularly good electrochemical performance with a 14.4% specific capacitance increase over supercapacitors using the bare PVA separator after 1000 cycles. With regards to safety, PVA becomes plasticized when immersed in 6 M KOH aqueous solution, thus there was no appreciable loss in tear resistance when the ceramic particles were added to PVA. Thus, the enhanced electrochemical properties can be attained without reduction in safety making the addition of ceramic nanoparticles to PVA separators a cost-effective strategy for increasing the ionic conductivity of separator materials for supercapacitor applications.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.293-297
• /
• 2003

A series of laboratory experiments was conducted to investigate the fixation characteristics of poly(vinylalcohol)-poly(methacrylic acid)(PVA-PMAA) mixed solution on the soluble (equation omitted)-radionuclides. Using the potentiometric titration technique, it was found out that the PVA and PMAA in a solution form intermacromolecular complex. The mobilized portion of each radionuclide by water from sand surface treated with a fixative was measured by ${\gamma}$-ray spectroscopy, The mobilized portion of minor radionuclides such as $^{241}$ Am, $^{154}$ Eu, $^{155}$ Eu and $^{144}$ Ce were higher than those of $^{134}$ Cs and $^{137}$ Cs. The capability of PVA-PMAA system was better among the candidate solutions for the fixation of total (equation omitted)-radioactivity, $^{134,137}$Cs which is composed of more than 85 % of total ${\gamma}$-radioactivity could be fixed effectively by the PVA-PMAA solution.