• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.21-26
• /
• 2008

Solar cells are renewable energy source which is not only environmentally friendly but also economically viable. For that matter, thin film materials are in observed with great in terest by a number of sources throughout the nations. Among these, CdTe (Cadium telluride) and CIS (copper indium diselenide) are the latest commercial products that are gathering attention in the solar cells markets. However there are some downsides to this newly invention. Since the materials are embedded, in the occasion of damage, certain amount of module residue can be released to water or soil. This paper outlines the results of our outdoor leaching experiments on photovoltaic (PV) samples broken into small fragments and been observed for 1 year.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.477-478
• /
• 2013

This paper presents the control mehtod of a photovoltaic(PV) hybrid generation with energy storage system(ESS). To stabilize power control between PV generation system with ESS and local load, the proposed control method performs grid-connected and islanding operations. Through the simulation results the theoretical analysis of proposed method is verified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.17-20
• /
• 2004

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demosntarted in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.1
• /
• pp.11-17
• /
• 2007

The amount of incident rays over inclination according to direction has been widely utilized as important data in installing photovoltaic systems. This is because the performance of the photovoltaic systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized photovoltaic systems will be provided for designers and employees working in the photovoltaic module related industries.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1474-1476
• /
• 2004

l5kW building integrated photovoltaic (BIPV) system had been installed and monitored at KIER in May 2003. Data acquisition system (DAS) is constructed for measuring and analyzing performance of PV system to observe the overall effect of environmental conditions on their operation characteristics. Performances of BIPV system have been evaluated and analyzed for component perspective (PV module and array, power conditioning system) and global perspective (system efficiency, capacity factor, electrical power energy) by long-term field test.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.68-69
• /
• 2017

본 논문에서는 독립형 태양광 시스템의 설계에서 배터리 용량 선정 방식에 관련하여 부하손실확률(LLP: Loss of Load Probability)이 0 인 기준을 토대로 시스템 무정전 전력공급을 위한 시행 착오법을 제안하였으며 시스템의 수명주기비용(LCC: Life Cycle Cost)을 분석하여 기존 시스템에 비해 경제성을 높이고자 한다. 제안한 방식의 검증을 위하여 시뮬레이션을 수행하였다.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.209-211
• /
• 2008

일반적으로 3상 계통연계형 PV 시스템용 PCS는 2-레벨 인버터 회로를 채용하고 AC 출력 선전류의 제어를 통하여 PV-array의 DC 출력을 계통측으로 발전시키는 형태로 구성된다. 이러한 전력변환 회로는 스위치 회로의 한 암에서 고장 시 시스템의 정상적인 발전이 어려운 단점을 가진다. 본 연구에서는 이러한 단점을 개선하기 위해 모듈형 3상 계통연계 태양광 발전 시스템용 PCS 및 제어방법을 제안하고 시뮬레이션을 통해 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.501-502
• /
• 2012

본 논문에서는 입력 단 센서를 제거한 태양광 AC 모듈 인터리브드 플라이백 인버터의 최대 전력점 추종 및 전류 평형 제어 기법을 제안한다. 기존 제어 방식들의 수행을 위해서는 입력 전압 $V_{pv}$, 입력 전류 $I_{pv}$ 센서와 각 상 스위치 단의 전류 센서들이 필요하나 4개의 센서와 주변 회로는 AC 모듈의 사이즈, 부피 및 가격을 증가시킨다. 이러한 문제점들을 해결하기 위해 제안하는 방식은 각 상의 전류 센서만을 사용하여 최대 전력점 추종 및 전류 평형 제어를 동시에 수행한다. 제안한 시스템의 타당성을 이론적 분석과 시뮬레이션을 통해 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.51-52
• /
• 2012

Among the PV-AC module topologies, the flyback inverter have been occupied the attention due to its simplicities on configuration and control. Proposed switching control method changes the mode of operation in DCM and BCM alternatively. It is expected that the high performances in efficiency and extension of input voltage range can be achieved by the conduction mode change. Proposed switching technique is validated by PSIM simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.127-132
• /
• 2020

In this study, single-phase and three-level boost converters applied to the photovoltaic system were compared and analyzed in terms of efficiency and power density according to the input voltage and load conditions. For accurate analysis of efficiency, the losses in each device of the single-phase and three-level boost converters were derived using mathematical equations and simulations by using the PSIM thermal module. Then, the losses were compared with the efficiency confirmed through the actual experiments. Results confirmed that the efficiency and power density can be improved by applying the three-level boost converter to the system according to the selection of the switching frequency.