• 제목/요약/키워드: PSZ

검색결과 48건 처리시간 0.047초

$BaTiO_3$ 세라믹스와 Oxide Setter의 반응성에 관한 연구 (Study on the Reaction between $BaTiO_3$ Ceramics and Oxide Setters)

  • 박정현;최현정;조경식;염강섭;조철구
    • 한국세라믹학회지
    • /
    • 제31권6호
    • /
    • pp.651-659
    • /
    • 1994
  • BaTiO3 ceramics were sintered on Al2O3, MgAl2O4, MgO and Mg-, Ca-, Y-stabilized zirconia setters. Then the influence of setters on the microstructure of BaTiO3 ceramics and the stability of setters were investigated by SEM, EDAX and XRD analyses. The microstructure of BaTiO3 ceramics sintered on Al2O3, MgAl2O4, MgO and Mg-PSZ showed large grain growth, but little grain growth on Ce-TZP(Tetragonal Zirconia Policrystal). Mg-PSZ(Partially Stabilized Zirconia), Ca-PSZ, Ce-TZP setters showed extensive phase transformation. Y-TZP and fused Y-SZ (Stabilized Zirconia) setters were stable. The liquid sintering aids of BaTiO3 ceramics accelerate mass transport. The reaction of SrTiO3 in BaTiO3 with ZrO2 resulted in the formation of SrZrO3.

  • PDF

고온환경하에서 지르코니아/니켈 소결재의 기계적 특성평가 (Evaluation of Mechanical Properties of Zirconia/Ni Sintering Materials at High Temperature)

  • 김연직
    • 한국재료학회지
    • /
    • 제6권9호
    • /
    • pp.972-978
    • /
    • 1996
  • 본 논문에서는 1673K에서 소결한 PSZ/Ni 복합재에 대한 종 탄성계수, 파괴강도, 파괴에너지 등의 기계적 특성을 평가하기 위해, 개량형 소형펀치시험을 행한 결과에 대해 논의한다. 또한 파면관찰과 AE법을 통해 이들 재료의 고온환경에서의 미시파괴과정도 조사하였다. 시험온도는 293K, 1073K, 1273K, 1473K의 4종류로 하였으며, PSZ/Ni 복합재료의 체적 조성비도 80/20, 60/40, 40/60, 20/80의 4종류이다. 이들 실험결과로부터, 1073K이상의 고온에서 Ni 함량이 60%인 PSZ/Ni 복합재가 파괴강도 및 파괴에너지가 가장 우수한 것을 알았다. 파면관찰에 의하면 이 재료의 조성비에서 파고거동이 취성으로부터 연성으로 천이하는 것을 확인할 수 있었다.

  • PDF

세라믹(PSZ)/금속(NiCrAlY) 경사기능성 복합재료의 화염 열충격 파괴특성 (Fracture Characteristics of Flame Thermal Shock in PSZ/NiCrAlY FGM)

  • 송준희;문상돈
    • 대한금속재료학회지
    • /
    • 제48권8호
    • /
    • pp.775-779
    • /
    • 2010
  • Functionally graded materials (FGM) of PSZ/NiCrAlY on Inconel substrate were fabricated by detonation gun spraying method. A thick ceramic layer generally has a high thermal barrier effect however, because failure often occurs, the use of an FGM layer gives an advantage in thermal property. During the thermal shock test, micro fracture processes were detected by the AE method. Also, the thermal shock test was performed for NFGM, FGM and the changed FGM in the layered composition profile. It was found through AE testing and the observation of fracture surface that FGM was superior to NFGM in thermal shock properties. The linear or metal-rich type FGM in composition profile had the best resisting property among the FGM. It was found that the controlled composition profile of the graded layers had better thermal properties.

PSZ, Al2O3, TiO2를 반응소결하여 제조한 쾌삭(快削) 세라믹스 (Machinable Ceramics Made by the Reaction Sintering of PSZ, Al2O3 and TiO2)

  • 박정현;정동식;이원재;김일수
    • 한국세라믹학회지
    • /
    • 제49권6호
    • /
    • pp.581-585
    • /
    • 2012
  • Machinability is important in engineering applications, especially in the current micro-electronics industry. Most ceramic components have complex shapes and hence require machining generally with diamond tools, which incurs a high production cost. Recently, h-BN-containing machinable ceramics have been developed, but these materials are very expensive due to the high raw materials and production costs. Therefore, the development of low-cost machinable ceramics is necessary. In this study, inexpensive $Al_2TiO_5$ was studied as a replacement for h-BN. $Al_2O_3$, $TiO_2$ and partially stabilized $ZrO_2$(PSZ) powders were mixed with various mole ratios and were sintered at $1500^{\circ}C$ for 1 h. The density, hardness and strength were then measured. The phase analysis and microstructures were observed by XRD and SEM, respectively. The machinability of each specimen was tested by micro-hole machining. The results of this research showed that the produced composites could be used as low-cost machinable ceramics.

지르코니아계 용사 코팅층의 Erosion 특성 (Erosion properties of plasma sprayed zirconia Based coatings)

  • 신종한;임상규;임대순
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.346-353
    • /
    • 2001
  • Zirconia powder containing 3 mol% yttria(3Y-PSZ) with and with out Fe$_2$O$_3$ addition was coated on tile cast iron substrate by plasma spraying method. The erosion experiments were performed at temperatures from $25^{\circ}C$ to $600^{\circ}C$. A gas blast type erosion tester was used to examine erosion behavior of the specimens. The results of 3Y-PSZ coatings showed that tile erosion rate had maximum value at 40$0^{\circ}C$. It coincided with tile results of phase transformation tetragonal phase to monoclinic phase caused by low temperature thermal degradation. The tensile stress relaxation and the micro-hardness improvement significantly influenced on the erosion rate at $600^{\circ}C$. In the case of Fe$_2$O$_3$ added 3Y-PSZ coatings, the erosion rate of tested at $25^{\circ}C$ showed maximum value at 5.0 mol% Fe$_2$O$_3$ added coating. This tendency is caused by the improvement of mechanical properties and the tensile residual stress. The erosion rate at 200'c and 400'L showed significantly decrease by Fe203 addition. This decrease is believed to be the stabilization of the tetragonal phase and the increase of micro-hardness.

  • PDF

고투명도 입방정상 지르코니아(5Y-PSZ) 라미네이트를 이용한 왜소치의 비침습적 심미 수복 증례 (A noninvasive esthetic treatment of isolated microdontia using new high-translucent cubic-phase zirconia (5Y-PSZ) laminate veneers: A case report)

  • 안민진;안도관;표세욱;김희경
    • 대한치과보철학회지
    • /
    • 제57권3호
    • /
    • pp.263-270
    • /
    • 2019
  • 치아수복의 최신 경향은 심미적인 개선과 건강한 치아 조직의 유지에 중점을 둔 보존적 심미 치료이다. 본 증례에서는 디지털 워크플로우를 사용하여 왜소치 환자에서 고투명도 입방정상 지르코니아(5Y-PSZ) 라미네이트를 이용한 비침습적 심미 치료의 성공적인 결과를 보고하고 임상적 의의를 평가하였다. 왜소치의 가족력이 있는 15세 여자 환자가 상악 전치부의 심미적 개선을 주소로 아주대학교 치과병원을 내원하였다. 별도의 치아 삭제 없이 디지털 인상 및 캐드캠 시스템을 통해 적절한 출현윤곽을 고려한 고투명도 입방정상 지르코니아(5Y-PSZ) 라미네이트를 제작하여 상악 6전치를 수복하였다. 최종 수복물 장착 6개월 후, 기계적 및 생물학적 합병증은 발견되지 않았으며 기능 및 심미적으로 만족스러운 결과를 보였다. 지르코니아의 치주 조직 친화성 및 개선된 투명도로 입방정상 지르코니아(5Y-PSZ)는 비침습적 심미보철 재료로 고려될 수 있다.

고순도 지르코니아 분말의 합성 및 그 특성 (조립방법에 따른 성형 및 소결 특성) (The Synthesis of High-purity Zirconia Powders and Its Properties (Compaction and Sintering Behaviro as a Function of Granulation Methods))

  • 김환;이종국;김주영;황규홍
    • 한국세라믹학회지
    • /
    • 제25권4호
    • /
    • pp.357-363
    • /
    • 1988
  • Ccompaction and sintering behavior of highly pure PSZ powders were investigated by laying the stress on the granulation processes. The particle size of coprecipitated PSZ powder was so fine that the agglomeration was severely formed during drying and calcing step and by this agglomeration differential sinering was occurred. The methanol dispersion of precipitates was the good method of avoiding severe agglomeration formed during drying process because of small surface tension than water. But perfect deagglomeraton was not possible due to high surface area of powders. So homogenization by granulation was needed, and among the method spray granulation was the most desirable to obtain homogeneous compacts and subsequent flaw-free ceramics.

  • PDF

Thermal Characteristic Evaluation of Functionally Graded Composites for PSZ/Metal

  • Lim, Jae-Kyoo;Song, Jun-Hee
    • Journal of Mechanical Science and Technology
    • /
    • 제14권3호
    • /
    • pp.298-305
    • /
    • 2000
  • The functionally graded material (FGM) is the new concept for a heat resisting material. FGM consists of ceramics on one side and metal on the other. A composition and microstructure of an intermediate layer change continuously from ceramics to metal at the micron level. This study is carried out to analyze the thermal shock characteristics of functionally graded PSZ/ metal composites. Heat-resistant property was evaluated by gas burner heating test using $C_2H_2/O_2$ combustion flame. The ceramic surface was heated with burner flame and the bottom surface cooled with water flow. Also, the composition profile and the thickness of the graded layer were varied to study the thermo mechanical response. Furthermore, this study carried out the thermal stress analysis to investigate the thermal characteristics by the finite element method. Acoustic emission (AE) monitoring was performed to detect the microfracture process in a thermal shock test.

  • PDF